Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube ONLY 13% OF SEATS AVAILABLE!!!*** 2017 ENERGY CONFERENCE ***


* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


Go Back   Energetic Forum > >
   

Renewable Energy Discussion on various alternative energy, renewable energy, & free energy technologies. Also any discussion about the environment, global warming, and other related topics are welcome here.

Bedini RPX Sideband Generator
Reply
 
Thread Tools
  #1  
Old 02-01-2017, 11:30 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Barbosa and Leal Developed as a Bionic Device

Since I have a penchant for believing that B&L is a reincarnation of Tesla's Special Generator, and since we know so little about William Lyne's description of the latter to replicate it, and since my own experiments at EarthingLife.info to discover what the latter actually is has spawned a new breed of B&L devoted to the welfare of the body as a bionic sleep circuit in the course of attempting to also make it work as a power magnifier for machines, I'm starting this new thread apart from my two prior haunts at Barbosa and Leal Devices - Info and Replication Details and Tesla's Special Tri-Metal Generator with a video, three rough sketches and a photo of a first attempt at a modified emulation of Clarence's replication of B&L based on my analysis at the three links above plus my B&L and TSG blogs.
Attached Images
File Type: jpg 20170202_064530.jpg (145.2 KB, 52 views)
File Type: jpg 1st attempt at building B&L, v.2.jpg (210.4 KB, 57 views)
__________________
 

Last edited by Vinyasi; 03-03-2017 at 03:15 AM.
Reply With Quote

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #2  
Old 02-04-2017, 07:40 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Question Common ground, construction material dependent on frequency?

Whether the mass for increasing output is iron or aluminum may depend upon the frequency applied to it: high for aluminum vs low for iron, or maybe incorporating both by favoring high over low?
Attached Images
File Type: jpg 1st attempt at building B&L, v.3.jpg (126.0 KB, 24 views)
File Type: jpg 1st attempt at building B&L, v.4.jpg (181.6 KB, 17 views)
__________________
 

Last edited by Vinyasi; 02-05-2017 at 03:33 AM.
Reply With Quote
  #3  
Old 02-05-2017, 07:44 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Updates on diodes and frequency vs tri-metals.

__________________
 

Last edited by Vinyasi; 02-05-2017 at 11:57 PM.
Reply With Quote
  #4  
Old 02-07-2017, 10:30 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Solid State vs Kinetic

Maybe it's possible to neutralize the Lenz effect with something other than two primaries wound on a pair of stationary, counterpoised toroids?


Maybe a pair of counterpoised, brush DC motors can also do the job?


Although, if the Lenz effect is truly balanced with counterpoised DC motors, then maybe they won't move? If either one does manage to rotate - if even slightly, then maybe a resistor or small coil has to be placed somewhere adjacent to one of its leads to slow it down or stop its rotation? Making this a substitute for toroids, not an alternative for solid state primaries within B&L's circuitry?
__________________
 

Last edited by Vinyasi; 02-18-2017 at 07:45 AM.
Reply With Quote
  #5  
Old 02-10-2017, 03:56 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Symmetry & Sleep vs Asymmetry & Overunity

I don't possess fancy shop equipment nor the skill to use them. All I ever use are a basic meter to test for continuity (have I connected two wires together, or am I kidding myself?), and simple inferences such as: the use of LEDs to test for the presence of amperage flowing in any position of the circuit relative to any other position with a similar LED placed there and which way does it flow? But my most important piece of equipment is the sensitivity of my own body, coupled with my intuition and limited expertise for interpreting results and what to do next. For this latter factor I owe my debt to the fortuitous discovery of other peoples' thoughts and experiences (here at Energetic Forum) on specific instances which are relevant to my study.


After testing out the circuit, above, and its overunity analog with neon bulb / resistor or resistor alone, below ...


... I've come to the conclusion that the 'idle mode' for this device is unity or less than unity, but not overunity due to its symmetry and lack of overunity whenever its neon bulb is missing ....


This latter condition is ideal for sleeping wherein the body wants to achieve balance during its period of rest. Overunity is a condition of asymmetry ideal for achieving Coefficients of Performance greater than one, but lousy for achieving deep rest, or any rest. Instead and more than likely, a condition ripe for cancer or a stroke will be the result of sleeping in a condition of asymmetry.

__________________
 

Last edited by Vinyasi; 02-10-2017 at 04:10 AM.
Reply With Quote
  #6  
Old 02-11-2017, 03:25 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Question Replacing Grounding Rods and Neon Bulb with a Four Plate Capacitor

I'm guessing that the main driving force behind B&L is the electrostatic field which it creates among the various grounding rods. Strong geomagnetism may indicate a parallel symptom of strong geoelectrostatics as well. Both will contribute to raising or maintaining the voltage delivered to the Captor Loop. The shape and orientation of the grounding rods is not unlike that of an emitter of an ion generator: a needle tip. So, an interactive relationship with the Earth is not unlikely. And the preferred embodiment of each grounding rod, copper plated steel, certainly lends the notion that geomagnetics is not a trivial influence.

With all of this in mind, it is not hard to imagine possible alternatives to an Earth-based B&L.

__________________
 
Reply With Quote
  #7  
Old 02-12-2017, 11:53 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Electrostatic Reception of Natural and Manmade Power from the Earth

__________________
 
Reply With Quote
  #8  
Old 02-12-2017, 11:54 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Separating our Symmetrical Devices from our Asymmetrical Devices

__________________
 
Reply With Quote
  #9  
Old 02-20-2017, 02:11 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
What Do We Know About Geology To Help Explain Barbosa and Leal's Use of Ground Rods?


Resistivity
Since Resistivity can be around 10 ohms – and upwards to nearly 100 ohms – per cubic meter near the surface of the Earth, it can be inferred from this that Barbosa and Leal does not seek to magnify capacitance in their circuit as a singular factor. In other words, the Earth doesn't represent a huge capacitor to the energy traveling around inside of B&L's circuit. The Earth is more likely a weak resistor. But this allows for this circuit's characteristic emphasis to lie elsewhere among some other factor of electrodynamics. This terrestrial resistance acts as a weak load which is ever present. Such mild loads are usually held as safety checks to disallow the circuit from frying itself should no load be engaged when the circuit is first turned ON.

Electrostatic Depth
The ground rods are kept closely spaced. One meter separates their radius. This implies that only the length of each ground rod is the depth of DC Electrostatic Resistivity to which B&L's circuit will encounter – no more than this (as further noted, below). So, a volume of soil bounded by a depth of eight feet – and whose width and length is no more width and length than the same as is covered by the orderly arrangement of all of the ground rods spaced next to one another – is the volume of Resistivity to which B&L's circuit encounters.

Electromagnetic Depth
On the other hand, the depth to which any electromagnetic wave (emanating from out of B&L's ground rods) can penetrate the Earth is determined by a lack of Resistivity within the soil surrounding the ground rods. Since this circuit depends upon geoelectromagnetics to magnify its output beyond that of its input, soil conductivity is to be avoided – as Clarence has already discovered during rains.

Depth of Electromagnetic penetration is also enhanced by the low frequency of consumers' use of municipal power (ranging from 50 to 60 cycles per second as indicated by Clarence's replication of Barbosa and Leal's AC version of their circuit). This conclusion is derived from the Magnetotelluric Field Method of geologic surveying...

“... depth penetration increases with a decrease in frequency ...” – Section 2.1.3 of My AIMS Essay.

Induced Polarization
“The operational procedure of the Induced Polarization (IP) method is similar to the resistivity method, as it also employs the same electrode configurations. However, the most effective ones are the double dipole and Schlumberger electrode configurations. The measurements are fraught with certain errors or anomalies (noise) which may be due to telluric currents, and electromagnetic coupling between measuring equipments like the wires, where current can be induced on another wire as a result of the shorter distance of separation between the two wires (Ampere’s law). [proximity of grounding rods]

Induced polarization may be time-domain, where controlled current signals are introduced into the ground through the two current electrodes, and the overvoltage between the signals is measured across the two potential electrodes. It could also be frequency domain, where the alternating current fed into the ground depends on frequency. It makes use of the principle that, when an alternating current is passed into the ground, the apparent resistivity of rocks in which polarisation can be induced is higher with low-frequency current than with higher-frequency current. This is because the capacitance of the ground inhibits the passage of direct currents but transmits alternating currents with increasing efficiency as the frequency rises [KB84].” – Section 2.2.3 of My AIMS Essay.

3.8 Pulse-transient electromagnetic systems
“These may also be referred to as the time-domain EM systems. The systems work by generating an electromagnetic field which induces a series of currents in the Earth at increasing depths over time. These currents create a magnetic field which is measured by the receiver in order to deduce subsurface properties and features at great depth. In other cases, it is the decaying voltage observed while the current is turned off, that is measured and recorded as a function of time. The magnitude and rate of decay of the eddy currents depend on the conductivity of the medium and on the geometry of the conductive layers. Currents will decay very rapidly in media with high resistivity. A conductive layer at a depth may “trap” currents in that layer, while currents elsewhere decay more rapidly.” – Section 3.8 of My AIMS Essay.

Field Antenna
I propose that B&L casts a net to “catch” the same fish as its net is composed of, namely that of: electromagnetics. And whatever it manages to collect is from no greater a depth than the length of each ground rod.

Orientation of Ground Rods
And the electromagnetism which these ground rods collect travels horizontally along the underside of the surface of the Earth tangential to the Earth's center of mass. This would evoke hints that this energy's origin is both manmade and put there by lightning strikes – not emanating outwardly towards the sky from the Earth's center. That would be a different energy source from the Earth's mass, itself.

Galvanic Response
It can't be ignored that the copper plating on each ground rod, overlaying its inner steel, creates a mild battery of electric charge despite the seeming mildness of this contribution towards the overall charge imparted to the soil by B&L's circuit.

Terrestrial Response
Nor can it be ignored that the Earth responds like a living breathing organism toward any electromagnetic influence – imparted to it from above – by its inhabitants.
__________________
 

Last edited by Vinyasi; 02-25-2017 at 02:27 PM.
Reply With Quote
  #10  
Old 02-25-2017, 05:06 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Simulating Barbosa and Leal, version 4

Referencing Schematic


Here's a fourth version of my attempt to simulate B&L using only grounding rods, but also using the above schematic to move the neon bulb yet again – this time, closer to the Captor Loop's ground rods (what would have been the 56 rods in Clarence's case):


And here's the exact same configuration except that Eric Dollard's analog computer in Longitudinal Magneto-Dielectric mode (not optimized for resonance) is substituting for the two ground rods in the example, above:


Notice anything peculiar when comparing the output of these two simulations?

The ground rod version manages to put out what appears to be a slight overunity by virtue of the wattage and amperage of the power sources sometimes going negative indicating a feedback of sorts undermining their expense of energy?

The light bulb's voltage is steady at 120 volts.

But its temperature, as measured by the simulator in Kelvins, never reaches beyond 1,800°, while the lamp of the LMD simulation easily gets white hot at over 2,400°.

The LMD version is more variable data measuring the lamp's output, but the evidence of overunity of the two power sources – especially the right-hand source – is much more promising.

No doubt, a longer LMD daisy chain, or an optimized LMD, or both, is the next step!
__________________
 
Reply With Quote
  #11  
Old 02-25-2017, 10:57 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Lengthening Oscilloscope Flash of Neon Bulb's Spark Gap with Help from a Capacitor

I don't know about you, but I don't like messy appearances (have I looked at myself in the mirror, lately?).👻

If an unregulated neon bulb / spark gap fires rapidly many times during each half-phase of an AC cycle creating peaks and troughs (of each spike) which are shallow by comparison to withholding the arcing to accentuate the height or depth of each spike, then maybe this is better? I don't know...

I found that by placing a capacitor across the neon bulb (in parallel with it), I could get the desired result by examining this simple example of a flashing neon bulb...


Here's another one...


Reference: [SOLVED] Neon Flasher Simulation at EdaBoard.com

Compare those clearly defined arcs to these messy ones...


Now, here, I've cleaned them up...

__________________
 

Last edited by Vinyasi; 02-25-2017 at 10:59 PM.
Reply With Quote
  #12  
Old 02-26-2017, 12:33 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Reducing the AC Sources to One

__________________
 
Reply With Quote
  #13  
Old 02-28-2017, 05:44 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Cool Simulation of Free Energy, v.1d - Regulation of Overunity vs Underunity

The problem with oscillating power is that it tends to escalate to infinity and melt the circuit into a pile of mess! So, I came up with a variation of Barbosa and Leal's Earth Captor – thanks to Clarence, Mark McKay, and Eric Dollard – which is an underunity circuit capable of intelligently managed, short bursts of overunity with the help of some switches to leak out any excess stored potential, or in the alternative spike those stored potentials with still more energy! You have to see it to believe it. Those stored potentials can linger for quite some time capable of powering loads long before requiring any more power from the source to make up for any loss due to inefficiency. In short, the recycling of energy!

I keep the value of the two central capacitors within a reasonable 10m Farads, each. And their associated transformers (flanking them on either side of a single LMD module) are a mere 100΅ Henry's - a fraction of what they could be! But why be an extremist? Why court danger by a ridiculous pursuit of excessive free energy? Why not a modest approach? One which we could live with?

This is the tragic joke of free energy in which prejudice, and blind belief, rules without any critical judgement. Sure, there's lots of frauds. But not all of them. A few are legitimate.


This simulation uses Iain Sharp's JavaScript port of Paul Falstad's Circuit Simulator originally written in Java. I've converted B&L's Electric Keeper (in the center of their circuit)...


... into one LMD module of Eric Dollard's Analog Computer in Longitudinal Magneto-Dielectric mode normally useful for bench testing emulations of various types of AC transmission lines. No animals were harmed in the making of this simulation.

Go to this link to download a blank simulator canvass into your browser's window:
https://is.gd/blankcanvass

Download this file and then load it into your browser's blank simulator:
https://is.gd/BL_LMD_v1d

Then...
ROLL YOUR MOUSE WHEEL DOWNWARDS FOUR NOTCHES TO EXPAND YOUR VIEW OF THIS CIRCUIT AND (HOPEFULLY) CENTER THE SCOPE LABELS.

The shortcut for this blog is:
https://is.gd/eureka_v1

Here is the backdrop to how I managed to evolve my thinking to achieve this with a two hour video composed of my prior development. Enjoy!

__________________
 

Last edited by Vinyasi; 02-28-2017 at 05:20 PM.
Reply With Quote
  #14  
Old 02-28-2017, 09:06 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Reality of Negative Resistance is Free Energy and Overunity. Wikipedia implies this.

https://en.wikipedia.org/wiki/Negative_Resistance

A gas discharge tube is a negative resistor. Find them in every neon bulb and every fluorescent tube (without its ballast).

Don't allow Wikipedia to tie us up in knots of confusion involving circular reasoning to obfuscate the truth of negative resistance. Ignore Wikipedia's confusing analogy that amperage drops as a consequence of voltage, and confusingly vice versa. Focus, instead, on the truth of negative resistance neatly tucked away in a simple math relation: the speed of amperage increases as the friction of resistance increases. And since the speed of amperage times the pressure of voltage equals the power of watts, then an increase in friction results in an increase of power. Overunity and free energy is this simple!

My simulation of negative resistance...
https://is.gd/eureka_v1

__________________
 

Last edited by Vinyasi; 02-28-2017 at 09:09 AM.
Reply With Quote
  #15  
Old 03-02-2017, 07:23 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Thumbs up Oscillating Power is a Hysteresis of Duty Cycle imparting an Illusion of Free Energy

I don't think that my little simulation of Eric Dollard's LMD (analog computer in Longitudinal Magneto-Dielectric mode) actually produces power inside the LMD module when the AC power source is shut OFF. Actually, I think that each cycle of oscillation begins before the last one ends building upon the prior and gaining a little more amplitude with each successive cycle giving the appearance of energy from the vacuum - energy created from nowhere. But it sure does look - for all intents and purposes - as if that is what has occurred whenever certain switches are engaged and others are not. I don't remember which ones. You'll have to play around with it...


I hope to do a chart of all eight possible combinations of switchings and their outcomes. In the meantime, I'd like to share with you what I went through the very first time I simulated free energy in disastrously humongous proportions...


In both of these two varieties of Extreme Overunity, a strange anomaly occurs. You think you're being dandy by shutting OFF the AC power to prevent any further mischief, but what happens? The amps, volts, and watts skyrocket even faster than when the AC power had been ON! No fooling!

And where does this escalation occur? EVERYWHERE in the circuit!!!! Now, that's indiscreet OVERUNITY!

Here is a very simple version of this basic concept with only four switches and a modest, rock solid output hanging around the kilo-volt range. Two additional loads are added to the inside of the LMD module...


And here is a very long video describing my inspired thinking on why some of us are convinced that free energy arises from out of nowhere – whenever it occurs as the result of oscillating power, but actually comes from hysteresis originating in the NEGATIVE RESISTANCE of a GAS DISCHARGE TUBE, or SPARK GAP, and then spreads throughout the circuit infecting everything including the load due to HYSTERESIS becoming applied to all of the components of the circuit (including the load - which is attached and must be included). This pervasive hysteresis is the byproduct of severe stress shocking the whole circuit to sustain the belief among all of the circuit's various components that they, too, are NEGATIVE RESISTORS just like the spark gap.

__________________
 

Last edited by Vinyasi; 03-02-2017 at 09:53 AM.
Reply With Quote
  #16  
Old 03-03-2017, 03:59 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Neon Bulb Placement is Predicated on its Role as a Negative Resistor

This applies to any overunity circuit whose behavior depends on the contribution which a gas discharge tube can impart to some or another part of the circuit to which this component is included.

I'm thinking of the Earth Captor of Barbosa and Leal. We want the Earth to become one gigantic negative resistor so that it will yield more amperage per increased resistance arising from additional demands made by a load (of appliances ;-). This, the neon bulb, or other appropriate sparking gap, can induce somehow within other components of the circuit to which it is attached including the load as well. But in the case of B&L, we especially want the volume of Earth in between the two sets of grounding rods to behave as a negative resistor so that whenever the load induces an increased resistance upon the Electric Keeper, in turn a demand for more amperage is imposed upon the Earth provided that the Earth can respond with a greater supply of amperage to the grounding rods. This will not happen if there is not enough grounding rods among the greater set of rods directly connected to the Captor Loop. But also if there is not enough geomagnetism in the area, or both. For we want the Earth to behave like the gas inside of the neon bulb. And we want the two sets of grounding rods to behave like the two electrodes inside of the neon bulb. The neon bulb can't provide abundant free energy on its own. Neither can the Earth. But the two together make for a splendid team work. And if the Lenz effect is neutralized between the two toroidal transformers flanking both sides of the Electric Keeper and loosely coupled to it, then only amperage will flow inside of the Electric Keeper. And since only amperage is being collected by the greater of the two sets of grounding rods, this whole system of enhancing a tiny input of power is very well designed by two excellent inventors, Nilson Barbosa and Cleriston Leal as successfully replicated by Clarence of Carolina, USA.

__________________
 
Reply With Quote
  #17  
Old 03-06-2017, 11:52 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Nascent Arc Welder Explains the Negative Resistance of a Gas Discharge Tube, W. Lyne

William Lyne has an explanation for the operation of a hydrogen arc welder that is directly relevant to why a little bitty neon bulb should give more amperage per additional resistance applied to a fixed voltage via leveraging from somewhere else other than the gas inside the neon bulb and other than the electric arc jumping across the two electrodes: energy from the environment.

If B&L can induce this characteristic in its entire circuit via oscillating voltage accumulation (conforming the entire circuit to the neon bulb's behavior under its pressure of coercion), including the volume of Earth between the two sets of grounding rods, then the additional energy is not coming from the Earth - according to Mr. Lyne, but because of it.

So, I guess there's no way around Eric Dollard's counter-space, complex numbers, version of explaining this overunity phenomenon involving negative resistors? In other words, there's no conventional explanation possible.

Negative Resistance of a Gas Discharge Tube is Explained by Nascent Arc Welders - William Lyne - a YouTube video

Atomic Hydrogen (Arc Welding)

Energy in Air
__________________
 
Reply With Quote
  #18  
Old 03-09-2017, 01:24 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
How do we explain the manifestation of free energy?

How do we explain the manifestation of free energy? By separating voltage from an AC sine wave and take its square root only when the voltage is most negative. Mother Nature will counter-balance that action by squaring a preexisting imaginary component of a complex value of aetheric amperage. The net result, for all intents and purposes, will appear as if the amperage materialized from out of nowhere! Voila! Free Energy!

And where do we find examples of this? In the characteristics of a neon bulb. Its ON state of resistance is the square root of its OFF state of resistance.

For example,
To simulate a neon bulb in the simulator of Paul Falstad and Iain Sharp, I enter the following values:

Strike Voltage = 65 volts
Holding Current = 3m Amps
ON Resistance = 3k Ohms
OFF Resistance = 10M Ohms

10M = 10,000,000
3k = 3,000

3,162 x 3,162 = 9,998,244

3k is the approximate square root of 10M. Hence, I suspect this is how the neon bulb dematerializes negative voltage: by taking its square root. Mother Nature, then, makes up the difference by manifesting an equivalent value of amperage from the complex world of counter-space. {See the works of Eric Dollard.}

__________________
 
Reply With Quote
  #19  
Old 03-09-2017, 03:56 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Results of Charting 19 Possible Switching Combinations

Here is the circuit I used for these experiments...
https://is.gd/3lamp_LMD5


And here is its slight modification based on these experiments...
https://is.gd/3lamp_LMD6


But before I finished my chart...
https://is.gd/chart_LMD5

...I played around with this little circuit...
https://is.gd/linear_LMD


Here is my simple LMD with shunt circuit...


Circuit...
https://is.gd/LMD_v1


I added a snubber circuit across each switch to protect against potential surges...
https://is.gd/LMD_v2


Download any of these simulator files and save them to your computer, then load them into this simulator...
https://is.gd/blankcanvas

__________________
 

Last edited by Vinyasi; 03-10-2017 at 07:37 AM.
Reply With Quote
  #20  
Old 03-10-2017, 08:01 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Energy IN vs Energy OUT does not tell the whole story, Recycling tells the other half

Electricity is not the same as force, nor the same as substance. Once spent, force - like mass - is gone. But electricity is not a force; nor is it mass - yet, it is a property of mass. Since the mass of wire is not consumed upon the use of the electrical phenomena within the wire, that electricity can be reused again and again as an oscillating phenomena. The only caveat is the loss due to inefficiency of the wire (in this example).

No negative resistance need be invoked. No energy from the vacuum. Recycling limited resources is a sign of maturity, not a sign of depravity.

__________________
 
Reply With Quote
  #21  
Old 03-11-2017, 05:32 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Off Duty Cycle equals OverUnity for Pulsed DC.


Lewis Carrol's "Through the Looking Glass" comes to mind whenever I think about how to describe my study of electrical overunity - nothing is as it seems. I turn a circuit off thinking how I'll stop it from continuing to climb upwards toward infinity of putting out far more watts than it takes into itself, and all I've managed to do is accelerate its ascension. If I add more resistance to the load - thinking that this will slow down overunity, all I've managed to do is speed it up yet again. Weird.

https://is.gd/normal_behavior
https://is.gd/pulse_DC_LMD
https://is.gd/pulse_DC_LMD2
https://is.gd/blankcanvas

__________________
 
Reply With Quote
  #22  
Old 03-12-2017, 10:48 AM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Capping Overunity of Giga Amperage Appearing at the Output of the 555 Timer

Despite the claim that a shorter duty cycle results in greater overunity, I discovered this is not true for higher voltages feeding the 555 timer chip. A 50/50 duty cycle gives greater overunity over a wider range of voltages by comparison to a shorter duty cycle.

Yet, I still had a problem with giga amps appearing at the output of the 555 timer and climbing to apparent infinity without limit! So, I put a 4 nano Ohm resistor between the 555 timer's output and the switch separating it from the LMD circuit. {LMD - Longitudinal Magneto-Dielectric of Eric Dollard's analog computer. See, his Borderland video.} This froze the over-amperage at a steady state and at a maximal value for the two central lamps of the LMD module to light up - and remain lit - at a minimum temperature for white brilliance. By raising the resistance of this little resistor ever so slightly can effectively snub the magical appearance of giga, or mega, amperage at the 555 timer's output.

I removed one lamp (that I had been using for dumping excess buildup of energy from within the LMD whenever the switch is opened after running the circuit for any length of time), because it wasn't doing much good (where it was positioned) while the switch is closed (or, at least this seemed to me). So, I added two more lamps in a different position in parallel flanking the overall design (where the spark gaps - neon bulbs - used to be in prior designs; see earlier posts).

BTW, the ten volt lamps and power source is arbitrary. It can be anything; yet, the outcome will remain the same! Just be sure and match the lamp's Nominal Voltage with the voltage of the power source to prevent irregularities from arising (which I have been steadfastly trying my best to prevent!).

Including the two central capacitors within the LMD loop (what would have been the Electric Keeper of B&L) makes the grounding rods and neon bulb (GDT: gas discharge tube) of Barbosa and Leal obsolete. But it introduces a new problem of regulating this device's abundant overunity.






Download this binary text file and save it onto your computer, or other device (Android, iPhone, et cetera)...
https://is.gd/pulse_DC_LMD3

Then load it into this JavaScript Simulator for designing and bench testing electronic circuits...
https://is.gd/blankcanvas
__________________
 

Last edited by Vinyasi; 03-12-2017 at 10:56 AM.
Reply With Quote
  #23  
Old 03-12-2017, 06:24 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Continuous and Manually Pulsed DC in Eric Dollard's LMD

When I first began to experiment with Eric Dollard's analog computer in Longitudinal Magneto-Dielectric mode using only one module powered by a DC source, I tried manually pulsing the DC source ON and OFF to induce overunity...


But I also tried leaving the switch ON without pulsing it for a milder gain in overunity...


Download this binary text file and save it onto your computer, iPhone, whatever...
https://is.gd/manual_pulse_LMD

And load it into this JavaScripted Simulator...
https://is.gd/blankcanvas
__________________
 
Reply With Quote
  #24  
Old 03-18-2017, 07:47 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
From where does Free Energy come?

Whirlpools of Oscillating Power Create their own Rules

A load is a resistor; it creates voltage as a consequence of its resistance. A power source is a negative resistor; it creates amperage as a consequence of its negative resistance.

A load is a resistor only so long as it resists. It ceases to be a load the instant it stops resisting.

A source of power is a negative resistor so long as it negatively resists. It ceases to be a source of power the instant it stops negatively resisting.

A battery is not a source of power, because it is not a negative resistor. It is a load with an internal resistance based on its change of state. It cannot supply amperage; the wire connecting its two terminals supplies that.

A battery is like a capacitor in that it is capable of storing energy - not supplying it. The difference between the two is that the dielectric material between the two capacitor plates is equivalent to the electrolyte within the battery; both store energy - they do not supply it. Ultimately, energy has to come from somewhere else.

From where does it come? It comes from negative resistance.

What is a negative resistor? A negative resistor is a situation in which it takes less energy to maintain its status as a negative resistor than it takes to induce a change of state within another resistor.

Resistors possess inertia; they don't like to have their status as a resistor altered without a definitive cost. This cost - we have come to know - is the cost of supplying power to its resistance acting as a load. And if we make the mistake of supplying too much power to a load, the load retaliates with heat or - worse – sudden breakdown.

But in the case of an LMD module acting as an intermediate source of power for a load, it merely intermediates its supply of power to a load through other whirlpools of reactive power who have to interact with loads directly. Yet, if merely one whirlpool stands aloof from having to deal with the real world of positive resistors, and merely induce kinetic motion to other whirlpools who directly deal with positively resistive loads, then its own kinetic inertia is preserved while periodically boosting the waning inertia of other whirlpools.

Amperage knows no resistance. That's the job of voltage. Voltage knows no motion. That's the job of amperage. Whirlpools of reactive power can specialize in whether they want to focus on setting forces to move in the real world of matter, heat and light, or else they can remain aloof and exclusively deal with other whirlpools of reactive power at very little – if any – cost to themselves, because it takes very little – if any – energy to transfer its own reactive power to another whirlpool wanting more reactive power. The funny thing about isolated whirlpools is that they get a kick out of demands made upon themselves to serve up more energy to other whirlpools whose task is to lose that power by way of dissipation. This kick amplifies the aloof whirlpool, rather than slowing it down, since it knows no resistance – hence, it knows no voltage, either. Without a voltage drop, amperage can wildly escalate itself; heal itself of having spent itself in service towards other whirlpools who can't possibly heal themselves who have been wound down in direct service towards the outside world of non-reactive power.
__________________
 
Reply With Quote
  #25  
Old 03-18-2017, 07:52 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
How does my free energy device induce a force without expending it?

By dividing up a circuit into multiple forces in which at least one force need not interact with anything other than another force - but not with the inertia of matter. Thus, these multiple forces can specialize themselves : one force can specialize on harboring the speed of amperage while another force can specialize on harboring the pressure of voltage. Thus, the "speedster's" job (positioned near the power source) will be to resist any attempt made by the power source to spend any amperage when it contributes voltage to the circuit by engulfing (smothering) the power source with a tremendous surge of its own accumulated amperage. The "torquester's" job will be to resist any attempt made by the load to lose any voltage to the circuit by engulfing (smothering) the load with a tremendous surge of its own accumulated voltage. These two separate tasks are created (subdivided) by the central whirlpool of electricity circulating within the confines of the Electric Keeper. This Electric Keeper is the analog computer in longitudinal magneto-dielectric mode of Eric Dollard composed of two toroidal transformers facing each other with two capacitors situated between them. By orienting the transformer's primary and secondary windings in such a way as to induce a step up of voltage away from the power source towards the load, the load is prevented from expending any voltage while the power source is prevented from expending any amperage. Thus, there's no appearance of any wattage at the source despite the pervasive presence of amperage throughout the circuit soliciting the appearance of wattage at the load. It's much easier to fight voltage than it is to fight amperage - in this special case, because the load is not contributing any voltage of its own. The load must merely conserve its voltage by transferring it away from the circuit - not towards it.

Editor's note - this last statement reads confused. And my video keeps repeating the notion that I need to pulse a dc source. I have learned a lot since two days ago when I taped this. Pulses are not needed. The initial kick off turning off the power is sufficient to initiate oscillations. And oscillations are sufficient to maintain themselves under the right circumstances. And the kinetic frequency of the filament within a glowing light bulb is sufficient to drive an overunity device to infinity and self-destruction from meltdown or explosion.

__________________
 
Reply With Quote
  #26  
Old 03-18-2017, 07:55 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Color Index = Kinetic Frequency = A Filament Bulb is a new type of Energy Storage ...

... and Reactance.

Just like a capacitor will discharge with a surge of reversed electric polarity, and just like a coiled inductor will discharge with a surge of reversed magnetic polarity, a filament bulb releases what? Heat? Or, thermionic induction to the circuit? There's something about a lamp, a filament bulb - not a gas discharge tube, that retains memory of its prior state and also has the ability to respond to change of state with the memory of its former state, namely: it hasn't stopped illuminating. The rest of the circuit's oscillations may be momentarily slowing down, but just when I think the circuit will die it surprises me and renews itself with another surge of abundance. From where did that renewal arise? From the lamp taking a very long time spending its kinetic frequency by reducing its color index (rated in Kelvins of all things!). Instead of losing - dissipating - that kinetic frequency, instead, it retained it for a long enough duration so that it might have it to share with the rest of the circuit when the circuit would be most receptive to assistance: when the circuit is about to die from having exhausted all of its other electric and magnetic resources.

__________________
 
Reply With Quote
  #27  
Old 03-18-2017, 07:58 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
From where does Free Energy come? Wrong question! How can we conserve the energy ...

... that we spend?

By segregating energy into a hierarchy of some energy being central to other energy happily performing all the grunge work, and by reserving the privilege of allowing only the central aristocratic energy to have most of the liability for feeding the grunge workers. This occurs as a two step process of accumulating energy among the aristocrats (a whirlpool of energy situated in the center of the LMD module of the circuit which I'm studying) and distributing among the aristocrats and the grunge workers. By distributing energy is this manner, energy is conserved. It takes less energy to serve one's self up as a role model than it takes to dissipate the performance of grunge work.

We all enjoy hearing physicists describe the discrete energy states of an electron, but do we ever hear about the influence the neutron has in determining the energy states of an electron? And is the expense of the neutron's job equivalent to the expense of the electron's job? Yet, if the neutron uses only one unit of influence to commandeer the electron into performing ten units of service, that's a gain of ten to one - a coefficient of performance of 1,000%!

__________________
 
Reply With Quote
  #28  
Old 03-18-2017, 08:01 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Parasitic oscillators have their own rule of thumb for transferring or moving energy-

... unrelated to the Conservation of Energy Law in physics.

Also covered in this video is the illusion of energy transfer or conversion or movement based on a transverse wave pattern that we recognize making movement or transfer or conversion irrelevant to what has actually happened.

__________________
 
Reply With Quote
  #29  
Old 03-18-2017, 08:05 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Curbing vagrant out-of-control overunity oscillations with high frequency pulses.

Funnily enough, the best way to control and put the brakes on free energy is by applying a frequency higher than the oscillations themselves. Continuous D.C. is worse! It allows for auto-induced oscillations and their rapid escalation. And allowing a device to self-run, by connecting the output with the input, is just as bad as applying continuous DC, because in both situations, liberty to oscillate becomes the norm rather than the exception.

__________________
 
Reply With Quote
  #30  
Old 03-18-2017, 08:07 PM
Vinyasi Vinyasi is offline
Senior Member
 
Join Date: May 2013
Posts: 321
Updates on completing my first series of simulations of Eric Dollard's LMD with ...

... Filament Lamps.

I'm at the point, now, in my research that it's beginning to look like a circuit which undergoes phases between a few alternate switching states in order to mimic balance between overunity and conventional underunity since neither of these two states can linger forever without killing the circuit either through lack of energy or spontaneous combustion resulting from too much energy. Since my goal was always to see if I can simulate a free energy device which could extend the range per charge on my electric car, or else make the range infinite, it's starting to look like I will also have to pulse the motor since the circuit won't be available, continuously, to provide power without switching the connection between the motor and the circuit ON and OFF while I alternate the circuit's internal switching arrangements. Thus, it's also starting to look like an EV Gray motor. For this, I am indebted to the analysis of Mark McKay...

Mark-McKay-analysis-of-EV-Gray-motor.zip - Google Drive

__________________
 
Reply With Quote
Reply

Tags
b&l, teslas, generator, barbosa, replication, special, leal, bionic, tri-metal, starting, machines, magnifier, details, info, prior, thread, haunts, devices, links, analysis, based, blogs, tsg, clarences, replicating

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

For One-Time Donations, use admin@ this domain > energeticforum.com

Choose your voluntary subscription

All times are GMT. The time now is 10:12 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers