Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube 2020 ENERGY CONFERENCE - PRE-REGISTER NOW!!!!

2020 Energy Science & Technology Conference
PRE-REGISTER NOW!!!
http://energyscienceconference.com


Go Back   Energetic Forum > >
   

Renewable Energy Discussion on various alternative energy, renewable energy, & free energy technologies. Also any discussion about the environment, global warming, and other related topics are welcome here.

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX

Reply
 
Thread Tools
  #91  
Old 02-14-2016, 05:20 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Current direction of collapsing field.

https://www.youtube.com/watch?v=vWvI7T7h3tk


@Mopozco Great, thanks for sharing results. The collapsing field of a coil wants to keep current flowing in same direction, coil behaves like battery in series with your 1.5V battery ~(-)batt(+)~~~(-)coil(+)~. Please confirm direction of LED on your drawing. Is LED cathode connected to coil so that when current from collapsing field at higher voltage (bemf) exceeds LED Vf it flashes it? This would keep the current flowing in the same direction not in opposite direction as shown on your drawing.

The question here in the "Reed Oscillator" is: Can current flow in both directions through the oscillating Reed switch simultaneously? The answer is Yes!

This means the current from the collapsing coil field can circle directly around to act as a power pulse without returning to the power source!
__________________
 

Last edited by Allen Burgess; 02-14-2016 at 05:29 PM.
Reply With Quote

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #92  
Old 02-14-2016, 08:34 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Collapsing back spike.

The coil acts as a second battery in series with the first. The current from the collapsing back spike travels in the same direction as the input current, but the voltage is reversed and leading the current, at a higher voltage then the 12 volts of input power. So the input goes through the top of the coil and out the bottem, along with the back spike. The back spike passes around the surface of the battery and back into the top of the coil before any input from the battery can reach the coil.

I theorize that the back spike beats the input power back to the power coil because the battery acts as a conductor for the higher voltage BEMF. Additionally, the increased flux from the hyper-accelerating spinner, adds more power to the collapsing field then the input can supply to the coil.

My analog milli-amp input gauge needle rested solidly on the peg while the self acceleration raced up at super velocity. I believe it's the recycling BEMF that causes this OU anomaly!
__________________
 

Last edited by Allen Burgess; 02-14-2016 at 08:39 PM.
Reply With Quote
  #93  
Old 02-14-2016, 09:53 PM
citfta's Avatar
citfta citfta is online now
Gold Member
 
Join Date: Jun 2008
Posts: 1,323
I was asked to post this by MileHigh. I had to temporarily remove Allen from my ignore list to do this, but he will go back on that list after I get done posting this.

Quote

Zero credit. @Matthew Jones,

This won't be the first time I was robbed of any credit; Tinselkoala and Milehigh pulled the same stunt on my Overunity "Self Accelerating Reed Switch" thread where I played a key role in the early development of the "MHOP", and was cheated out of any credit due! Try to keep me on your phony "Ignore List" bub!


Gentlemen,

This is the second time that "Allen Burgess" a.k.a. "Synchro1" has accused myself and TK of not giving him credit for participating in the MHOP project in his posts on the Energetic Forum. I think he posted this on the "Your Basic Coil" and "Oscillating Reed Switch Pulse Motor" threads.

Allen Burgess/Synchro1 had absolutely nothing at all to do with the MHOP project. He was merely a bystander for the whole affair. He was not "cheated" out of anything and he made no contribution to the project whatsoever.

For the MHOP project, I was the "architect" and TK did the actual schematic and the build and the testing. He also designed and built the LED strobe circuit which I had nothing to do with. That's the way it really went down.

Myself and TK don't have access to the Energetic Forum. Feel free to post my comments on EF if you want to.

MileHigh


Allen, you are burning all your bridges. Where are you going to go when no one on any forum will work with you? I believe you want to be a serious researcher but you keep chasing people away with your attitude and lies. Please grow up and concentrate on your projects and leave the personal insults and attacks off the forums.
__________________
Just because someone disagrees with you does NOT make them your enemy. We can disagree without attacking someone. This means YOU especially BroMikey.

Last edited by citfta; 02-14-2016 at 10:00 PM.
Reply With Quote
  #94  
Old 02-14-2016, 10:15 PM
Matthew Jones's Avatar
Matthew Jones Matthew Jones is offline
Platinum Member
 
Join Date: Dec 2007
Posts: 2,741
Quote:
Originally Posted by citfta View Post
Zero credit. @Matthew Jones,
This won't be the first time I was robbed of any credit; Tinselkoala and Milehigh pulled the same stunt on my Overunity "Self Accelerating Reed Switch" thread where I played a key role in the early development of the "MHOP", and was cheated out of any credit due! Try to keep me on your phony "Ignore List" bub!
Oh what I plan on doing will be in no way theft. Allen's little motor has a very small event that can be exploited and tuned, into a larger effect that is truely novel compared to anything else, even his motor. This is a complete build of not only a motor but circuit that does not employ the Reed switch in anyway.
This is the typical behavior that I intend to block on a regular basis. People who Spam and cause problems for people trying to build and share.
Had Allen just dropped the chip on his shoulder I would have more than welcomed any input and discussion to forward a project. Even to the point of sharing a working device. But he cannot control himself and his derogative behavior just ruins everything for everyone.

Plus I hope if it works well I can give it away, so definitely no theft involved. Just the inevitable evolution of a good thing.

Matt
__________________
ADD BROMIKEY TO YOUR IGNORE LIST He is a saboteur bent on the systematic distraction of every good topic on this forum and since he has been here most working threads have shut down. He is the enemy. If you have blocked him already add this to your signature and encourage others to block him as well. His onslaught of rambling in large text and his constant attempts to misinform at the excuse of being stupid should no longer be tolerated.

USER CP/Ignore list.
Reply With Quote
  #95  
Old 02-14-2016, 11:00 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
"I had to temporarily remove Allen from my ignore list"


Does that sound like "Bullcrap" or what? More "Snitch work" from Carroll.



Our Price: $173.49

1/4" I.D. This one's a real beauty!

. Item: FR188-2RS Ball Bearing
. Type: Sealed Full Ceramic Flanged Ball Bearing
. Cage: PTFE
. Closures: PTFE Covers (white)
. Balls: ZrO2 Ceramic (zirconia)
__________________
 

Last edited by Allen Burgess; 08-02-2017 at 02:10 PM.
Reply With Quote
  #96  
Old 02-14-2016, 11:15 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Reed switch.

Quote:
Originally Posted by Matthew Jones View Post
Oh what I plan on doing will be in no way theft. Allen's little motor has a very small event that can be exploited and tuned, into a larger effect that is truely novel compared to anything else, even his motor. This is a complete build of not only a motor but circuit that does not employ the Reed switch in anyway.
This is the typical behavior that I intend to block on a regular basis. People who Spam and cause problems for people trying to build and share.
Had Allen just dropped the chip on his shoulder I would have more than welcomed any input and discussion to forward a project. Even to the point of sharing a working device. But he cannot control himself and his derogative behavior just ruins everything for everyone.

Plus I hope if it works well I can give it away, so definitely no theft involved. Just the inevitable evolution of a good thing.

Matt
Aything Mr. Jones does to improve on the "Reed Switch Oscillator" can only result in inferior performance just like Milehigh's substitution of the Op Amp I.C. for his piece of crap MHOP.
__________________
 

Last edited by Allen Burgess; 02-14-2016 at 11:19 PM.
Reply With Quote
  #97  
Old 02-15-2016, 12:05 AM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Frictionless bearing.

Two ceramic bearings and a horizontally mounted axle results in downward pressure friction on the bearings. A steel ball magnetic suspension bearing like "Cobra killer2000's", uses the pressure of gravity to reduce friction. One flanged precision ceramic bearing at the base of a vertically suspended axle should eliminate all the downward pressure friction on the bearing, and help to stabilize and secure the spinner following an overhead separation event.

This combination should result in less friction then a neo tube riding on a ball bearing over glass, and deliver stationary stability too.
__________________
 

Last edited by Allen Burgess; 02-15-2016 at 12:18 AM.
Reply With Quote
  #98  
Old 02-16-2016, 02:48 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Steel bearings.

Two steel ball bearings will adhere directly to each end of a diametric tube magnet with no axle or disk magnet in the way. How would the tube magnet and steel bearings behave if we simply stood the combination upright inside a plastic ring with attractive metal discs, or disc magnets on top and bottem?

This looks like an elegant and blindingly simple solution to the bearing problem!
__________________
 

Last edited by Allen Burgess; 02-16-2016 at 03:16 PM.
Reply With Quote
  #99  
Old 02-16-2016, 03:06 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Theft of credit.

Quote from Matthew Jones:

"Allen's little motor has a very small event that can be exploited and tuned, into a larger effect that is truely novel compared to anything else, even his motor".

Matthew's describing just how TK and MH pirated my discovery off my "Self accelerating Reed switch thread" on the Overunity forum. Anyone can view it and see what really went on!
__________________
 
Reply With Quote
  #100  
Old 02-16-2016, 03:16 PM
SisMika's Avatar
SisMika SisMika is offline
Member
 
Join Date: Oct 2015
Posts: 32
Quote:
Originally Posted by Allen Burgess View Post
Quote from Matthew Jones:

"Allen's little motor has a very small event that can be exploited and tuned, into a larger effect that is truely novel compared to anything else, even his motor".

Matthew's describing just how TK and MH pirated my discovery off my "Self accelerating Reed switch thread" on the Overunity forum. Anyone can view it and see what really went on!

Of course you are hoping they don't really view that thread. If they do they will see you contributed nothing worthwhile to that effort. If you really contributed anything useful to that thread show us what it was. Otherwise you are just whining over nothing.
__________________
 
Reply With Quote
  #101  
Old 02-16-2016, 03:27 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Credit.

@SisMika,

Conradelectro explained why free energy would cause more wars on the OU forum. Citfta's with TK and MH and Conradelectro; They're all part of a counter free energy sub culture. Citfta's violating the Energetic Forum ban on those Trolls while he has me moderated by Stephan for frivolous reasons. The "Reed Switch Oscillator" exhibits OU behavior; This is why I am persecuted by that pack of Jackals.
__________________
 

Last edited by Allen Burgess; 02-16-2016 at 03:30 PM.
Reply With Quote
  #102  
Old 02-16-2016, 03:52 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Self shortening pulse width.

Why is the "Reed Switch Oscillator" Overunity? Answer: The pulse width is self shortening. What would it take to get an electronic circuit to mimic that effect? Think about this!

I believe it's possible that an (Oscillating Magnetic Plasma Field) forms inside the "Reed Switch" vacuum chamber at the higher speed ranges. There's no way a solid state electronic circuit can compete with this kind of quantum activity.

Matthew Jones has grossly undergauged this awesome effect by describing it as a "Very small effect". All Mr. Jones will accomplish in the end is delivering another piece of clumsy crap like TK and MH's MHOP!
__________________
 

Last edited by Allen Burgess; 02-16-2016 at 08:30 PM.
Reply With Quote
  #103  
Old 02-16-2016, 08:39 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Ossie.

I got a comment from Ossie of the "Ossie Motor" back when I first unveiled the "Oscillator". He pitched the same line of malarkey Matthew Jones just threw at me; "How insignificant my discovery was compared the idea he got from it". All four of those copy cats , MH & TK included, tried to seperate the pulse cutting effect of the "Oscillating Reed switch". Ossie did it with a second Reed switch. I built his motor and it nearly dropped dead on me.

Gotoluc has a pulse width control circuit he copied from Verpies and Itsu over on the OU forum; Just another overworked piece of crap compared to the "Oscillator" that recycles it's own "backspike" spontaneously.

I bet Matthew Jones tries to spring a Hall effect "Ossie Motor" on us, if he ever gets it to work. How boring!

The "top secret" configuration again below:

A quick review: The "South" diametric neo spinner permanent magnet field closes the normally open Reed switch contacts and charges the electromagnetic coil as it passes the switch. A "South" electromagnetic pole then appears at the end of the coil and opens the attached Reed switch's contacts before the spring action of the metal can seperate them, breaking the circuit sooner. The faster the neo tube spins, the faster the Reed switch contacts close and open, resulting in a steadily diminishing pulse duration as the rotor accelerates. The forced oscillation allows the Reed switch to operate way over it's factory rated speed limit! Harmonic speed bursts result that are truely astonishing!
__________________
 

Last edited by Allen Burgess; 08-02-2017 at 02:10 PM.
Reply With Quote
  #104  
Old 02-16-2016, 11:34 PM
SisMika's Avatar
SisMika SisMika is offline
Member
 
Join Date: Oct 2015
Posts: 32
Quote:
Originally Posted by Allen Burgess View Post
I got a comment from Ossie of the "Ossie Motor" back when I first unveiled the "Oscillator". He pitched the same line of malarkey Matthew Jones just threw at me; "How insignificant my discovery was compared the idea he got from it". All four of those copy cats , MH & TK included, tried to seperate the pulse cutting effect of the "Oscillating Reed switch". Ossie did it with a second Reed switch. I built his motor and it nearly dropped dead on me.

Gotoluc has a pulse width control circuit he copied from Verpies and Itsu over on the OU forum; Just another overworked piece of crap compared to the "Oscillator" that recycles it's own "backspike" spontaneously.

I bet Matthew Jones tries to spring a Hall effect "Ossie Motor" on us, if he ever gets it to work. How boring!
What is really boring is watching a supposed to be grownup whining like a 1 year old that has lost his pacifier. It would be funny if it wasn't so sad. I think I need to add you to my ignore list you don't think is real. Maybe you should check your user profile and then you could learn how to ignore posters you don't want to waste your time reading.
__________________
 
Reply With Quote
  #105  
Old 02-17-2016, 12:08 AM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Whining.

@SisMika of a "walloping 32 posts",

Drop dead!
__________________
 

Last edited by Allen Burgess; 02-17-2016 at 02:22 AM.
Reply With Quote
  #106  
Old 02-17-2016, 12:40 AM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Schematic.

All it would take to build a "Reed Switch Oscillator" would be to invert and re-position the Reed switch to the end of the power coil in the schematic below: This is a Kindergarten level project. I'm flabbergasted that these "Nerds" can't handle it! All you'd need to do is switch the polarity of the battery contacts if it failed to start up. "You don't want to try that; It would speed up and run out of control"!

The rotor magnets in the schematic are monopole S pole facing out. The normally open Reed switch has one contact that is fixed, and a second contact that is polarized N and bends. The N pole bending contact is farthest from the magnets in the schematic. That means the end of the power coil facing the magnets would need an electromagnetic S pole to attract the flexible contact away from it's grounding sister when it's energized. This would cause the motor to run in repulsion. The Reed switch in the schematic would need to be turned over when re-positioned on the end of the coil to work correctly. Naturally, the rotor in the schematic would speed up and disintegrate if you hooked it up that way and tried to run it. That's why I designed the "Oscillating Reed Switch" motor rotor with high speed precision ceramic bearings to run inside a protective PVC coupling. It's simple, but "don't try it without first taking the proper safety precautions"!

Another important point is that a North or reversed coil pole will fry the Reed switch by keeping the contacts closed too long. Best to test for correct polarity in advance! Avoid welding the contacts together.
__________________
 

Last edited by Allen Burgess; 08-02-2017 at 02:10 PM.
Reply With Quote
  #107  
Old 02-17-2016, 05:59 AM
Matthew Jones's Avatar
Matthew Jones Matthew Jones is offline
Platinum Member
 
Join Date: Dec 2007
Posts: 2,741
Wow they told me you were talking a bunch of stuff, so I turned off the ignore for a minute to read it.

Allen you need to rebuild your motor or go get it out of storage or whatever so you can stop making excuses for your illiterate behavior. Look at what is happening with a scope.

Your motor for brief time in one rotation motors on the B Field and generates on the A field of the magnet. So I know that does not sound all mystical or anything to you. It has no super physics word or extra dynamic ability. Its very simple.
The magnet is sideways and when you turn the coil on it tries to align itself but the reed turns off and the A field (Either south or north) then generates energy in coil. The next time the reed is closed the charge in the coil is higher than the charge in the battery and it discharges back. In fact the charge in the coil is several times higher voltage than the battery.

This accounts for what you have seen in your tests in which the battery seem to not to discharge current, or there is a 0 current reading.

I have not seen the "Weight Gain" claim but who knows...

This "No Current" effect can be exploited and tuned. There is a better configuration that allows you to adjust based on the current coming into the motor and the current going out. This can be balanced and I believe with an ability to balance it we can find a gain. But..

There is no reason to include you even though you stumbled on this, and all your magical mystical super physics explanation only re-enforce that thought train. You don't even have clue as to the simple little effect you have found.
I don't want to have to push you out the picture I just want you to stop pushing everyone else away with your sense of superiority. Just chill out, watch and if you don't agree then speak up. But don't try to act like you have some superior intellect when you can't build your own project. Just chill out stop with accusations, except there probably a simple answer, and ride it for what its worth.

Or go on and keep posting to yourself while everyone ignores you. Who cares really, when all said and done with.

Matt
__________________
ADD BROMIKEY TO YOUR IGNORE LIST He is a saboteur bent on the systematic distraction of every good topic on this forum and since he has been here most working threads have shut down. He is the enemy. If you have blocked him already add this to your signature and encourage others to block him as well. His onslaught of rambling in large text and his constant attempts to misinform at the excuse of being stupid should no longer be tolerated.

USER CP/Ignore list.
Reply With Quote
  #108  
Old 02-17-2016, 06:13 AM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Quote:
Originally Posted by Matthew Jones View Post
Wow they told me you were talking a bunch of stuff, so I turned off the ignore for a minute to read it.

Allen you need to rebuild your motor or go get it out of storage or whatever so you can stop making excuses for your illiterate behavior. Look at what is happening with a scope.

Your motor for brief time in one rotation motors on the B Field and generates on the A field of the magnet. So I know that does not sound all mystical or anything to you. It has no super physics word or extra dynamic ability. Its very simple.
The magnet is sideways and when you turn the coil on it tries to align itself but the reed turns off and the A field (Either south or north) then generates energy in coil. The next time the reed is closed the charge in the coil is higher than the charge in the battery and it discharges back. In fact the charge in the coil is several times higher voltage than the battery.

This accounts for what you have seen in your tests in which the battery seem to not to discharge current, or there is a 0 current reading.

I have not seen the "Weight Gain" claim but who knows...

This "No Current" effect can be exploited and tuned. There is a better configuration that allows you to adjust based on the current coming into the motor and the current going out. This can be balanced and I believe with an ability to balance it we can find a gain. But..

There is no reason to include you even though you stumbled on this, and all your magical mystical super physics explanation only re-enforce that thought train. You don't even have clue as to the simple little effect you have found.
I don't want to have to push you out the picture I just want you to stop pushing everyone else away with your sense of superiority. Just chill out, watch and if you don't agree then speak up. But don't try to act like you have some superior intellect when you can't build your own project. Just chill out stop with accusations, except there probably a simple answer, and ride it for what its worth.

Or go on and keep posting to yourself while everyone ignores you. Who cares really, when all said and done with.

Matt
@Matthew Jones,

The coil winding is not as important as balancing the field strength of the magnet rotor with the field strength of the coil adjacent to the Reed switch. This is merely a matter of positioning. Almost any coil and voltage will work depending on the distance where the permanent magnet field equals the pull on the Reed contact from the coil field. This is the critical factor in sustaining the oscillation. The field strength of the rotor increases with speed along with the field strength of the coil, but not evenly. Constant re-positioning is required to sustain the acceleration along with the oscillation.The higher voltage in the coil is definitly a major factor in this motor's apparent ability to begin powering itself!
__________________
 

Last edited by Allen Burgess; 02-17-2016 at 06:17 AM.
Reply With Quote
  #109  
Old 02-17-2016, 02:03 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Cold running.

Another interesting feature of the oscillator is the cooling effect of the switch and coil compared to the overheating problem we encounter with a transistor at high speeds. I believe the transistor tries to push more power into the coil then it can handle. The oscillating Reed switch does a good job of cutting excess power to the coil.
__________________
 
Reply With Quote
  #110  
Old 02-17-2016, 02:10 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Ignore list.

@Matthew Jones,

Quote from Matthew:

"Go on and keep posting to yourself while everyone ignores you".

Everyone? There are at least several hundred viewers in my audience Pal. I initiated and run this thread, not you. How many spins have you logged with your "Oscillator"? You talk as if you're the inventor and instructor not the pupil. Start to show some proper respect!

Another thing is, if the coil wants to follow the magnet, just let it reposition itself, and don't fight it.
__________________
 

Last edited by Allen Burgess; 02-17-2016 at 02:18 PM.
Reply With Quote
  #111  
Old 02-17-2016, 03:01 PM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,449
Oh my,

So here's what will probably happen now....

Matt will put you back on his ignore list where you belong. He will take what he has learned from what you have done, just as you have taken what YOU have learned from what OTHERS have done, and he will incorporate it into a design using things he has learned over the years from other people and from his OWN work, that have NOTHING whatsoever to do with YOU, and he will build a device that he shares with several others for testing and development that will PROBABLY make what you have done look like the guy who figured out how to make steel sitting around watching his pot of metal bubble while around him sky scrapers were being erected.

And you will look like the little man who developed the electric light, but forgot to develop a switch, so remains in the dark half the time.

It's fine that you believe you should get credit for developing something, but when you DON'T know what you've even got, and he you have NO IDEA AT ALL what to do with it, maybe you should learn to keep quiet and quit insisting on all the credit.

When are you going to figure out that it isn't the CREDIT but the WORK ITSELF that is so important, and the WHO is far, far less important than the WHAT. If more people had figured that out, we might already HAVE the missing pieces so many of us have been searching for.

I already KNOW how you are going to respond to this, because your character has shown itself over time, and I know enough about people to know you are not going to change. But that's ok. I have a thick skin and to me it is all about the progress we make. Besides, now that your idea has been "stolen", you really aren't necessary anymore anyway, are you? So you can continue to "rule" here while the rest of us go on our merry way.

Just one thing....I know you said that the original device you built is locked in some shed somewhere, but if it is SOOOOO simple to build and is SOOOOOOO important that others would "steal" your amazing idea, why is it you haven't spent the $10.00 to build another one, but have tried to bully others into doing it instead? Just curious.

Anyway, I guess you can lump me in with Matt and Carroll as a treacherous, thieving ass hat. Not that I will hear your rant, as I have had my say and can put you back on the ignore list. ;-)
__________________
"I aim to misbehave" Malcolm Reynolds
"Try Not! Do or do not. There is no 'Try' ". Yoda
Reply With Quote
  #112  
Old 02-17-2016, 03:08 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Turion crap.

@Turion,

I never bullied anyone into doing anything. I was asked to help by OrionLightShip. "Retarded Nerds" like you put John Bedini through the same kind of horsecrap; That's why he's no longer willing to help anyone. You're just another "Stinking Gook"!
__________________
 

Last edited by Allen Burgess; 02-17-2016 at 03:14 PM.
Reply With Quote
  #113  
Old 02-17-2016, 04:45 PM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,449
???

Oh, come on,why stop at John Bedini? Why not try to convince all of us you are as important as Tesla? You can do it. I know you can. I mean YOU believe it so it MUST be so. LOL.

So I'm a gook? Is that a racial slur? If so, what race do YOU assume I am that qualifies me to be called a gook?

I notice you TOTALLY avoided the question about why you haven't built another one of these things yourself and instead, spend all your time telling others how to do it. LOL.

And YES, I forgot to put you on ignore. My wife's dog pooped on the carpet and I had to clean it up, and YOU are less important than dog poop, so the choice was easy, but I have now taken care of that problem.
__________________
"I aim to misbehave" Malcolm Reynolds
"Try Not! Do or do not. There is no 'Try' ". Yoda
Reply With Quote
  #114  
Old 02-17-2016, 06:38 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Video.

@Matthew Jones,

You allege you have something? Lets see it! All you've done is talk.
__________________
 

Last edited by Allen Burgess; 02-17-2016 at 09:21 PM.
Reply With Quote
  #115  
Old 02-18-2016, 01:30 AM
Matthew Jones's Avatar
Matthew Jones Matthew Jones is offline
Platinum Member
 
Join Date: Dec 2007
Posts: 2,741
Quote:
Originally Posted by Allen Burgess View Post
@Matthew Jones,

You allege you have something? Lets see it! All you've done is talk.
Back on the ignore list. The illness in Allen has kicked back in. You'll see when I am ready and not before. Dumb Dumb Dumb, narcissistic behavior. Its sad.

Have fun

Matt
__________________
ADD BROMIKEY TO YOUR IGNORE LIST He is a saboteur bent on the systematic distraction of every good topic on this forum and since he has been here most working threads have shut down. He is the enemy. If you have blocked him already add this to your signature and encourage others to block him as well. His onslaught of rambling in large text and his constant attempts to misinform at the excuse of being stupid should no longer be tolerated.

USER CP/Ignore list.
Reply With Quote
  #116  
Old 02-18-2016, 03:01 AM
admin's Avatar
admin admin is offline
Energetic Forum Admin
 
Join Date: Feb 2007
Posts: 218
Ignore List

Can't we all just get along?

Please click this link and put any member on your ignore list that you do not want to hear from: http://www.energeticforum.com/profile.php?do=ignorelist

All you have to do is enter their username and click the submit button.
__________________
Energetic Forum Administrator
http://www.energeticforum.com
Reply With Quote
  #117  
Old 02-18-2016, 03:13 AM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,449
Comment about my mother

Whoever deleted the comment Allen made about my MOTHER, I appreciate it. There are some depths we should not be allowed to sink to. I almost responded to that comment, but decided that the wiser choice was to put him back on my ignore list and exit this thread.
__________________
"I aim to misbehave" Malcolm Reynolds
"Try Not! Do or do not. There is no 'Try' ". Yoda
Reply With Quote
  #118  
Old 02-18-2016, 01:39 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Salutation.

Good morning Vietnam!
__________________
 
Reply With Quote
  #119  
Old 02-18-2016, 01:53 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Stupidity.

Quote from Turion:

"I notice you TOTALLY avoided the question about why you haven't built another one of these things yourself and instead, spend all your time telling others how to do it. LOL".

This comment of yours really betrays your baseless stupidity, bub! I was asked to explain how to do it. How would it help anyone learn how to build it if I merely rebuilt the old one myself?
__________________
 
Reply With Quote
  #120  
Old 02-18-2016, 06:21 PM
Allen Burgess Allen Burgess is offline
Gold Member
 
Join Date: Sep 2011
Posts: 2,234
Reed switch polarity.

The Reed switch pictured below is a 5 amp, 12 volt Radio Shack item selling for $3.99. This is a "Normally Open" (NO), South pole triggered switch. The picture I supplied has the switch mounted backwards on the coil by mistake, so I want to help clear this up:

The North polarized bending contact is positioned on the far side away from the pins inside the blue cylinder vacuum housing of the Reed switch pictured below. This means that the South pole of a magnet will close the contacts held to the "Pins" side of the switch. Closing the contacts turns the switch on and energizes the coil. Therefore; The Reed switch needs to have the plain side of the switch snugly attached to the South pole forming end of the power coil wires to oscillate. The switch is rated at 10 to 60 amp turns of field strength depending on the wire gauge. It 's a simple job to turn the switch around the other way, with the pins facing the coil, and connect it in series with a 12 volt bulb; Then, to connect a coil wire quickly in series to the open battery electrode and see if the bulb blinks on. This is the best way to test the coil for sufficient magnetic field strength to trigger the Reed switch. Next, it would help to gauge the distance the coil and Reed switch need to be from the magnet rotor by reversing the direction of the switch and seeing how close the south pole of the permanent magnet needs to be to turn the switch on quickly, and blink the bulb that way. Keeping the switch on too long will weld the switch contacts shut. Don't try to light the bulb to full intensity while testing; It's enough just to cause a quick blink!
__________________
 

Last edited by Allen Burgess; 08-02-2017 at 02:10 PM.
Reply With Quote
Reply

Tags
spinning, oscillating, material, reed, switch, pulse, motor, pipe, inside, pvc, coupling;, 1/2, thicker, walled, item, list, shopping, shattering, thick, coupling, diameter, advise, ample, protection, inch

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

Choose your voluntary subscription

For one-time donations, please use the below button.


All times are GMT. The time now is 03:41 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers