Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube ONLY 13% OF SEATS AVAILABLE!!!*** 2017 ENERGY CONFERENCE ***


* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


Go Back   Energetic Forum > >
   

Renewable Energy Discussion on various alternative energy, renewable energy, & free energy technologies. Also any discussion about the environment, global warming, and other related topics are welcome here.

Bedini RPX Sideband Generator
Reply
 
Thread Tools
  #121  
Old 11-04-2016, 01:23 PM
mbrownn mbrownn is offline
Gold Member
 
Join Date: Jan 2011
Posts: 1,627
Tesla built a motor which recovered energy by transformer action and then used this recovered current to power the rotor. This way he doubled the efficiency of the basic design he was using. It is called the induction motor.

Think about that, the rotor is powered for free doubling the output.

He also used a step down to a very low voltage and very high current in that rotor as he knew resistance was a loss and produced heat.

There is much that can be learned from an induction motor.

To help you understand it, get a Universal motor, power the field coils with AC, and short the rotor by connecting the two brushes together. Now you have a basic induction motor.
__________________
 
Reply With Quote

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #122  
Old 11-04-2016, 03:38 PM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41
Quote:
Originally Posted by mbrownn View Post
Tesla built a motor which recovered energy by transformer action and then used this recovered current to power the rotor. This way he doubled the efficiency of the basic design he was using. It is called the induction motor.

Think about that, the rotor is powered for free doubling the output.

He also used a step down to a very low voltage and very high current in that rotor as he knew resistance was a loss and produced heat.

There is much that can be learned from an induction motor.

To help you understand it, get a Universal motor, power the field coils with AC, and short the rotor by connecting the two brushes together. Now you have a basic induction motor.
Unfortunately, the AC motor is not over unity.
It's a delusion. AC motor has been beneficial to the industry at a time when Germany, its modern modification - three-phase, squirrel cage, made Russian engineer Dolivo-Dobrovolsky. Tesla did two-phase motors, under its two-phase network.
And attempts to realize over-unity are different, that's like a version of the devaysa Motor Uncle Vasya.
???????????? ????????? ????? ???? ???? ?????? ??????

__________________
 
Reply With Quote
  #123  
Old 11-05-2016, 01:35 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Quote:
Originally Posted by Rakarskiy View Post
Unfortunately, the AC motor is not over unity.
It's a delusion. AC motor has been beneficial to the industry at a time when Germany, its modern modification - three-phase, squirrel cage, made Russian engineer Dolivo-Dobrovolsky. Tesla did two-phase motors, under its two-phase network.
And attempts to realize over-unity are different, that's like a version of the devaysa Motor Uncle Vasya.
I rest my case, BEST of the BEST. I see you did your homework. Another great build, super, I always speak
highly of the builders.
__________________
 

Last edited by BroMikey; 11-05-2016 at 01:38 AM.
Reply With Quote
  #124  
Old 11-07-2016, 12:26 PM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41
Quote:
Originally Posted by Turion View Post
The goal of ANY motor used in a free energy system should be to provide the MOST motive force for the LEAST consumption. With that in mind, consider John Bedini's Zero Force Motor, which runs on little or NO amp draw, and has NO BACK EMF. When you combine that with a Lenz FREE generator and run it on the 3 battery system so that almost all of the expended energy is recovered, you can't HELP but arrive at a COP far >1 no matter HOW CRAPPY your build is.

Dave

https://www.youtube.com/watch?v=3kpDMMcNQxc
Good! A little walk in the numbers and time.
VEGA system spends 180 watts of power rotation.
For power, the pulse motor coils, built-in, system Adams generation produces 185 watts.
With the main generator 1 kW of power, remove the 0.15 watts per second charging power to the battery bank.

1. W 0.15 * (60 seconds) = 9Vatt per minute.
2. Watt 9 * (60 min) = 0.540 kWh.
3. 0.540 kWh * (24 hours) = 12.96 kW charging power per day.

0.15 W of output power, with a generator power of 1 kW = idling.

When this pulse power, with porosity 6 350W is not more than (0.6 * 350 = 180W), provided that the rotary motor 6% horizon. Main is overclocked inertia flywheel.

Then think. Where have you seen that at least one generating unit, worked for no permanent requirement of generation. Consumption adjusted to the generation.

__________________
 

Last edited by Rakarskiy; 11-07-2016 at 12:50 PM.
Reply With Quote
  #125  
Old 11-10-2016, 01:46 PM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41
Here is a rough balance of momentum in watts.
To this result is achieved, it is necessary to have a cross-section of the coil wire is not less than 1.25 mm and 10 mH.


__________________
 
Reply With Quote
  #126  
Old 11-30-2016, 02:47 PM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41


Pulse pusher system is divided into two parts.
The first part, due to the energy in the capacitor. Which stored by the energy of self-induction, the previous pulse.
The second part of the pulse, with the classic indicators of not more than0,8 - 0,9 efficiency.

If you recall the Bedini circuit using a half-bridge.


What I suggest is the following.


Energy self-inductance, directly to the condenser. Capacitor receive voltage level is greater than the battery voltage.

When next pulse capacitor is discharged first, forming the "explosive momentum". The battery does not waste energy.

The second part of the pulse, as usual.

But kinetically, the rotor has already received its repulsive force.
__________________
 
Reply With Quote
  #127  
Old 12-09-2016, 07:44 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Commerical Self Running Generation of Electric Power

Self running perfected many many years ago.



__________________
 

Last edited by BroMikey; 12-09-2016 at 07:51 AM.
Reply With Quote
  #128  
Old 12-15-2016, 02:53 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Free Energy Generator 100% Self Runing


__________________
 
Reply With Quote
  #129  
Old 12-26-2016, 09:12 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Poor man's Motor Generator.

If you will notice he uses currently available coils off of washing
machines. The small coils are the water inlet valves and the large
coils and "U" shaped core is from a water pump.

__________________
 
Reply With Quote
  #130  
Old 12-30-2016, 08:43 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Motor Generator acceleration under load

https://www.youtube.com/channel/UCNk6nZuUrTLRnp__hAgAqjw/videos

Just preliminary testing, nice



__________________
 

Last edited by BroMikey; 12-30-2016 at 08:45 AM.
Reply With Quote
  #131  
Old 12-30-2016, 01:56 PM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41
The approximate calculation of what the generator will be released?

__________________
 
Reply With Quote
  #132  
Old 12-30-2016, 08:23 PM
bistander bistander is online now
Silver Member
 
Join Date: Apr 2015
Posts: 836
Motor generator

Quote:
Originally Posted by Rakarskiy View Post
The approximate calculation of what the generator will be released?

986767 J (Joules) = 986767 Ws (Watt seconds) = 274 Wh (Watt hours) = 0.274 kWh (kiloWatt hour).

It appears that there are errors elsewhere also. A mass flywheel will only enter into the energy equation when the speed changes.

If you're asking for the steady state output from the motor generator shown in the diagram, I'd say about 700 Watts.

Regards,

bi
__________________
 
Reply With Quote
  #133  
Old 12-30-2016, 10:07 PM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Does anybody even have a vague understanding of how a motor
pulling a standard generator could put out more than the input
with all of the weight and friction from the bearings?

Now I could see it IF the generator was special but a standard
unit? I need more input for my calculations.
__________________
 
Reply With Quote
  #134  
Old 12-31-2016, 06:55 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411

By holding a 12v battery across the start and run terminal the dc
power will magnetize it and once it is generating it will become a huge
magnet.

Hold the 12v battery across the terminals where you generally plug your
AC motor into the wall. Hold it for 5 seconds and left go. Repeat without
heating the winding depending on the size of your battery.




TROUBLE SHOOTING- If the generator will not build-up voltage when
initially operated at or near nameplate speed, the capacitors may be
too small, If single phase it may be turning backwards, the connections
may be incorrect, the machine may be faulty or the iron in the machine
may have lost its residual magnetism and need to be flashed. All the
fixes are evident except flashing. To flash it momentarily, connect a
car battery across the generator output terminals while it is running
full speed ‘with no load’. ONE second is more than enough time to flash
the machine


Also in reviewing my statement on FLASHING A MOTOR you must turn
the motor in the same direction as it was designed to work, so that
generating may occur. In one of my adventures I used a 1750 RPM
standard washing machine motor that was rated at 9 amps and to
get 8 amps out generating I had to run the motor faster up to 1875RPM
to 1900rpm according to reading materials I found and lost.

Furthermore the method shown in the PDF file has you running the
motor full speed when flashing. I did not like that idea and the sales
person told me to do the flashing while it sat on the bench.

Either method works where you are turning the shaft or not turning the
shaft, however should AC output occur instantly better make sure the
battery is not connected longer than 1 second because 120vac will
then be sent to your battery.

I do not use this method, I played it safe since the magnetic charge
is good for hours after FLASHING and lasts all year after the first use.

The first time I did this it didn't work because I was turning the shaft
in the wrong direction. The second time I FLASHED a motor it didn't
work right away and had to stop the motor and FLASH for longer
being careful not to exceed the amp capacity of the motor winding
with my car battery.

At first I was afraid of smoking the winding and did not have an amp
gauge on hand so I was working blind. I knew that the spark off the
end of the wires was less than a battery charge so I felt it would
be around the safe limit.

3-5 seconds on and 3-5 seconds off and the second time I did this
10 times. Then it worked great.


__________________
 

Last edited by BroMikey; 01-02-2017 at 02:46 AM.
Reply With Quote
  #135  
Old 01-02-2017, 01:51 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Motor and motor/generator using magnetic transmission
meaning both motors each have a flywheel disk with magnets on them
so the no belt is used to connect one motor to the next. The magnets
are arranged to create a mechanical advantage between the two
rotating disks in close proximity to one another.

230 percent overunity


__________________
 

Last edited by BroMikey; 01-02-2017 at 01:56 AM.
Reply With Quote
  #136  
Old 01-02-2017, 02:17 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
TROUBLE SHOOTING- If the generator will not build-up voltage when
initially operated at or near nameplate speed, the capacitors may be
too small, If single phase it may be turning backwards, the connections
may be incorrect, the machine may be faulty or the iron in the machine
may have lost its residual magnetism and need to be flashed. All the
fixes are evident except flashing. To flash it momentarily, connect a
car battery across the generator output terminals while it is running
full speed ‘with no load’. ONE second is more than enough time to flash
the machine


Also in reviewing my statement on FLASHING A MOTOR you must turn
the motor in the same direction as it was designed to work, so that
generating may occur.

Furthermore the method shown in the PDF file has you running the
motor full speed when flashing. I did not like that idea and the sales
person told me to do the flashing while it sat on the bench.

Either method works whether you are turning the shaft or not turning the
shaft, however should AC output occur instantly better make sure the
battery is not connected longer than 1 second because 120vac will
then be sent to your battery.

I do not use this method, I played it safe since the magnetic charge
is good for hours after FLASHING and lasts all year after the first use.

The first time I did this it didn't work because I was turning the shaft
in the wrong direction. The second time I FLASHED a motor it didn't
work right away and had to stop the motor and FLASH for longer
being careful not to exceed the amp capacity of the motor winding
with my car battery.

At first I was afraid of smoking the winding and did not have an amp
gauge on hand so I was working blind. I knew that the spark off the
end of the wires was less than a battery charge so I felt it would
be around the safe limit.

3-5 seconds on and 3-5 seconds off and the second time I did this
10 times. Then it worked great.

I know that this sounds like an unimportant detail to many who have
never asked these questions.

This ability to run an off the shelf motor with a FLASH may inspire
some of you to alter motors that do not have a full machine shop and
an EE degree. The EE boys rarely know these details anyway.

Thru the many years of searching I had expected to find someone who
knew and understood motors to make simple experiments and now I
realize that very few have the same goals.

To me this is very important because it relieves the investigator of
so many challenges that has stopped almost all progress due to the need
for accuracy and precision.

Altering a DC motor is fun and rewarding also, to see that go to the

"BASIC FREE ENERGY DEVICE"

__________________
 

Last edited by BroMikey; 01-02-2017 at 02:52 AM.
Reply With Quote
  #137  
Old 01-03-2017, 08:18 AM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41
Quote:
986767 J (Joules) = 986767 Ws (Watt seconds) = 274 Wh (Watt hours) = 0.274 kWh (kiloWatt hour).
1J=1Ws If this expression is true, then [QUOTE]986767 J (Joules) = 986767 Ws (Watt seconds)
We translate watts kilowatts 986767 Ws (Watt seconds) =
986 767 Ws / 1000 = 986.8 kWs (1 kW = 1000W)
986 767 Ws / 3600 (1h=3600s) = 274Wh (0.274 kWh)
Watts agree not translated in kilowatts.

However, our system does not work in PTO mode, power is saved Energii. It is important to take into account the torque momet per second. The actual change of the operating mode of the output torque. This can be compared with the mode of operation of the smoothing capacitor after the bridge rectifier diodes. That is, every second, what power will put pressure on the forces, accompanied by. Massive wheel by the incoming energy is untwisted, and when the incoming energy to become less then the wheel rotates by inertia, gives part of its energy.
Only 6000 rpm for 40 kg already traumatic flywheels. It requires a heavy duty material.
__________________
 

Last edited by Rakarskiy; 01-03-2017 at 08:43 AM.
Reply With Quote
  #138  
Old 01-29-2017, 12:09 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Understanding MURRAY generator

Simple understanding in building a generator that over comes the
magnetic lock that changes the COP




__________________
 

Last edited by BroMikey; 01-29-2017 at 12:12 AM.
Reply With Quote
  #139  
Old 01-31-2017, 08:24 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Free Energy Motor Generator FOR-SALE finally.


__________________
 
Reply With Quote
  #140  
Old 01-31-2017, 11:24 AM
interdesign21 interdesign21 is offline
Senior Member
 
Join Date: Mar 2011
Location: Malaga-Spain
Posts: 101
The original web page.
InnovaTehno – Research and experimental development on natural sciences and engineering.

regards
Alvaro
__________________
 
Reply With Quote
  #141  
Old 01-31-2017, 02:15 PM
wantomake's Avatar
wantomake wantomake is offline
Silver Member
 
Join Date: Mar 2010
Posts: 508
Will this last?

Alvaro,
For $4000+ US dollars(if I calculated correctly) and if you live near them, you can get one for a trial or test run. Also would provide security for the delivery.

I did send them a comment and hopes for them. I highly doubt tptb would allow one to be sent here to the US. Also my thoughts on open sourcing their device.

Looks like Methernitha Testatika in Switzerland does it?
wantomake
__________________
 
Reply With Quote
  #142  
Old 02-02-2017, 05:43 AM
energicjoe energicjoe is offline
Junior Member
 
Join Date: Dec 2010
Posts: 20
How to order the free energy device above

How to order – InnovaTehno

The way to get our IPP7.4 device is very easy. Write your name, country, state, postal code, email and your full phone number in the form below. In return, you will get the information of the availability, date and time of the delivery with your order number.

Do not write the full street address, the courier will call you from our official number, and will ask you for your address (we protect your identity in this way).
You also can order by calling our phone numbers or visiting us at our address. See the details on our contact page.

Important condition:
For the moment we can deliver to only certain regions of the European Union and Australia.
Approximately 150 km from the point of our delivery offices for your Country/Region.
For eligibility see markers on the map on the bottom of the page.
For example Munich, Germany and in a radius of 150 km we can deliver.
This is because these are the areas where we can protect our device/intellectual property with the security companies we have a deal.
The customer must be the owner of the building in which the device will be installed for a minimum of one year.

Shipping is free because our company uses delivery vans, that use the same technology as our generator.

The conditions of the free trial:
30 days for free trial, if you are not satisfied and have been using it for 15 days, we will come and pick up the generator back for free.
If you use it for 16-30 days then you will pay for the return shipping a symbolic amount so we get compensated at least a little bit. Because there are a lot of mean people out there, and they can just start ordering for fun.
How to pay:
You can pay during or after the trial period ends, it will all state in the contract that you will receive before the delivery on your e-mail.

To use the device the minimum room space should be: (l x w x h) 3m x 2m x 2m, dry and airy.

Price:
1. Indoor model-3800€+VAT
2. Outdoor model- 4100€+VAT
__________________
 
Reply With Quote
  #143  
Old 02-02-2017, 08:18 AM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41

__________________
 
Reply With Quote
  #144  
Old 02-02-2017, 05:05 PM
wantomake's Avatar
wantomake wantomake is offline
Silver Member
 
Join Date: Mar 2010
Posts: 508
Quote:
Originally Posted by energicjoe View Post
How to order – InnovaTehno

The way to get our IPP7.4 device is very easy. Write your name, country, state, postal code, email and your full phone number in the form below. In return, you will get the information of the availability, date and time of the delivery with your order number.

Do not write the full street address, the courier will call you from our official number, and will ask you for your address (we protect your identity in this way).
You also can order by calling our phone numbers or visiting us at our address. See the details on our contact page.

Important condition:
For the moment we can deliver to only certain regions of the European Union and Australia.
Approximately 150 km from the point of our delivery offices for your Country/Region.
For eligibility see markers on the map on the bottom of the page.
For example Munich, Germany and in a radius of 150 km we can deliver.
This is because these are the areas where we can protect our device/intellectual property with the security companies we have a deal.
The customer must be the owner of the building in which the device will be installed for a minimum of one year.

Shipping is free because our company uses delivery vans, that use the same technology as our generator.

The conditions of the free trial:
30 days for free trial, if you are not satisfied and have been using it for 15 days, we will come and pick up the generator back for free.
If you use it for 16-30 days then you will pay for the return shipping a symbolic amount so we get compensated at least a little bit. Because there are a lot of mean people out there, and they can just start ordering for fun.
How to pay:
You can pay during or after the trial period ends, it will all state in the contract that you will receive before the delivery on your e-mail.

To use the device the minimum room space should be: (l x w x h) 3m x 2m x 2m, dry and airy.

Price:
1. Indoor model-3800€+VAT
2. Outdoor model- 4100€+VAT
Yes I read all this on the website.
I'll repeat what I commented to them. Even if you could ship to the USA, I doubt tptb would allow anyone here to receive one.

Also it's too bad this invention wasn't released to everyone via open source. That way it would survive and be used to help save this planet from us careless humans.

Too many lives of inventors and family have been lost when an invention is discovered. Open sourcing is the only safe way.

wantomake
__________________
 
Reply With Quote
  #145  
Old 02-02-2017, 09:56 PM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Quote:
Originally Posted by Rakarskiy View Post


Thanks for pointing out this similarity. Everyone has heard that the
high voltage free energy transformations have an advantage exponentially
with regard to energy multiples.

We also have heard that energy from the atmosphere or surroundings
can be drawn into a high voltage array acting like an antenna somehow.

The other pictures showing a large single winding going thru the center
of the two high voltage coils reminded me of the captor, I don't know
why.

In every free energy generator the system must have a circuit that
operates that is not being drawn down or directly tied to the transforming
side. This has been called the "DIPOLE" circuit.

The "DIPOLE" side would be less effected maybe high very high voltages
when an adjacent coil transformer is tapping in to extract only a small
portion of the available ambient.

The system appears to use a simple motor coil to keep it's wheel turning
(maybe small magnets on the back) and the front looks like convex
shaped disks.

This is the best I can explain any of this being a beginner on the subject
yet even as feeble of an attempt as this may be I think that by talking
about any subject and throwing around the terms, is the only way to
magnify.

To put any process under the magnifying glass means to share thoughts
so I thank you
Mr. Rakarskiy
__________________
 
Reply With Quote
  #146  
Old 02-03-2017, 06:22 AM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41
It is not only the similarity of the source of the static electricity. Testatika generator without fuel, working in the community in Austria.
Material on the subject, although only the possibility of establishing ?????? ?.?. ??????? ?????????.






Leyden jar can be replaced by an inductive capacitor.
And the size of the capacitor and wire size are explained in size.
Since the beginning of 2016 in Russia and other countries to actively self-created and used by the medical device on the basis of inductive capacitor.
__________________
 
Reply With Quote
  #147  
Old 02-03-2017, 07:50 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
I am looking at the pictures.






















Quote:
Originally Posted by Rakarskiy View Post
It is not only the similarity of the source of the static electricity. Testatika generator without fuel, working in the community in Austria.
Material on the subject, although only the possibility of establishing ?????? ?.?. ??????? ?????????.






Leyden jar can be replaced by an inductive capacitor.
And the size of the capacitor and wire size are explained in size.
Since the beginning of 2016 in Russia and other countries to actively self-created and used by the medical device on the basis of inductive capacitor.
__________________
 
Reply With Quote
  #148  
Old 02-06-2017, 08:28 AM
Rakarskiy Rakarskiy is offline
Member
 
Join Date: Jun 2014
Posts: 41
Small material on Testatika (in Russian)



__________________
 
Reply With Quote
  #149  
Old 03-15-2017, 04:11 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Amplidyne Motor Generator

Year 1943


https://www.youtube.com/watch?v=sKQRqPlFMII




PART TWO
https://www.youtube.com/watch?v=CN5vocEPEaM





https://www.youtube.com/watch?v=n70wJBQEOzU




https://www.youtube.com/watch?v=yVzWvtcF6pw
__________________
 
Reply With Quote
  #150  
Old 03-15-2017, 05:27 AM
BroMikey's Avatar
BroMikey BroMikey is offline
Platinum Member
 
Join Date: Jan 2013
Posts: 4,411
Quote:
Originally Posted by Rakarskiy View Post
Small material on Testatika (in Russian)[/URL]
Thanks Rakarskiy I am getting to these pictures now.Nice.























__________________
 
Reply With Quote
Reply

Tags
energy, free, motor, electricity, imanes, generator, magnet, renewable, gravity, electric, power, magnets, force, kinetic, electrical, speed, electromagnetic, motors, generators, body, object, rest, news, relativity, mechanics

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

For One-Time Donations, use admin@ this domain > energeticforum.com

Choose your voluntary subscription

All times are GMT. The time now is 06:26 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers