Oh thats right I see it now. Thx again. How in the world does it get
more out than in? Any ideas?

__________________
 

Development of the generator in Zhitomir (Ukraine), we do the same in Kiev (Ukraine) completely independ. Even with this winding, there are excitation options in which the braking is weak.

Attached Images

2019-09-07_222534.jpg (152.2 KB, 267 views)

__________________
 

It is wound like a cyclotron or collider/accelerator rings. Anymore data
on this guy? Does the generator have a name? Cool idea.

__________________
 

Bedini S.E.T.D. Self Excited Transformer Device

__________________
 

In General, the winding system is seen in the generator Nikola Tesla, though in the patent available, it does not focus on the design. But visually it was at the dawn of electricity. Modern developments are more effective.



http://lipo.ece.wisc.edu/2014pubs/2014-10.pdf

https://www.researchgate.net/publica...n_and_analysis

Attached Images

2019-09-08_092749.jpg (52.9 KB, 252 views)

__________________
 

__________________
 

Not free energy.

Two Dyno brush discharge style motors one acting as generator.

#Roobert33 Alternator and Motor charging system Explanation: In this system, the alternator is able to give stable and durable current because it has a low number of turns and the motor pushing the alternator makes little effort to drag it. Note: This unusual method of generating current between motor and alternator is different from conventional current generators and can not be compared with 12V 220V electronic inverters, they are different systems for running time and current absorption. Features: Alternator, 220V 1.2KW, 50Hz, 1450rpm, year 1948. 12V DC permanent magnet motor. Bulbs 220V 500W + 200W. Battery power system12V 44 Ah. Two 12V 44 Ah batteries. Charger 12-24 volts.
NOTICE: This video is just an experiment and a demonstration, no confirmation of free energy.This experiment can be inspirational to those who try to create something concrete, but only inspiration. https://www.youtube.com/channel/UCrgd...

__________________
 

Thats a nice looking boat anchor you have there.

over unity isnt the problem Mike... It's making it RADIANT ENERGY (Cold Fusion) is where the fun begins. Its UN-Meterable, UN-Oscilloscopable,
UN-Multi-meterable and its UN-Limited.
So get down off your high horse... you are no longer the expert here.

These are the Practical inventions of Walter Russell Science with WHOM I am working with on a confidentiality arrangement and have been for 2 years. philosophy.org it took a man of GOD named Joe to RE-INVENT it again.

The Tesla designed Fisher and Paykel is a motor AND a generator in one... BUT only for those with eyes to see and a grand to spare because otherwise you will never figure it out. Not with an electron model anyway.

Ive described how its done on evgray forum and they didnt believe me either so its a different tact this time. Either go there and read my posts and find out who I am in the real world or promote outdated inventions like you do so well here.
Can we dispense with the personal attacks now and begin LESSONS ??

__________________
 

Talk right and you will not be corrected so much. Man of God? Does
he levitate? Don't start with the pristine pedestal worship of a man.

These people you call losers and very smart people who see right thru
you. We are all men of God when we manifest purity of thought, not
that condescending speech that proves you are a devil.

Hard science plz. Best to talk right. I will pat you on the back when
you do. In the mean time it looks like you need schooling yourself.

Give us something tangible.

__________________
 

To whom it may concern, old dogs beware, new tricks needed

__________________
 

Ring magnet generator

Skip to 7 min mark

__________________
 

Did anyone tried this? Does it really works?

__________________
 

I have not tried it but maybe someone will.

__________________
 

Maybe this concept with two speaker magnets is much easier to configure!

https://www.youtube.com/watch?v=yxMUURf6UTs

__________________
 

Let’s all just post YouTube videos instead of building anything! Here’s one: https://youtu.be/T52cEofR8WI

Or an even simpler version of the same design.
https://youtu.be/YZzNh9Bd9ZU

By next week you won’t even need the magnet! Just wrap your wire around a wrench and power your house! If you see it on YouTube, it must be real!!!

__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist

:sup rise:

Just a wrench and wire to power our house? Awesome

Of course no one will try it and when or if they do will go away quietly
with their tail between their legs in embarrassment never to be heard
from again. That is the goal in the first place you know.

Disinformation is real.

__________________
 

Generator from Valery Valka (Zhytomyr, Ukraine), a successful sample at 500 rpm has an output power of 0.8 kW. In this case, there is no traditional braking of rotation, with the induction of current in the connection "star". There is no such effect as magnetic adhesion at the star.



http://lipo.ece.wisc.edu/2014pubs/2014-10.pdf

__________________
 

This is an awesome generator. Do you know what was said?

__________________
 

He praises the design, says he made a lot of mistakes that he finally solved. and got the result. It is shown that when the windings of the "triangle" are short-circuited, the generator has a braking effect (which is much smaller. than traditional), there is no simple magnetic adhesion . I told him earlier how to make a two-phase design where the two phases have a 180-degree shift, from a single magnetic field, when switched. the design will brake even less.

Similar design Motor Generators

__________________
 

Flux switching alternator
A flux switching alternator is a form of high-speed alternator, an AC electrical generator, intended for direct drive by a turbine. They are simple in design, making them rugged and capable of high rotation speeds. This makes them suitable for their only widespread use, in guided missiles.


In Russian it sounds like " switch generators"


Translated a little. Do you think to charge the battery instead of the solar panels will go, or nepogody.

__________________
 

According to the author 80 kW (????) With his words in the induction coils of the generator are cooled. The author presents himself as a Soviet Citizen!

__________________
 

This is the spirit of a true inventor, working tirelessly willing
to show results that took him 30 years to do. Professionally built
machine. The stator windings appear to be close to the rotor
magnet where normally steel is.

Then he used induction coils.

__________________
 

Interesting toy! In the simulator, the circuit has no power supply, only ground. Press the ground button and connect to the circuit. Wait a few seconds and turn it off. The circuit will have unreal voltage potential and fantastic currents.

http://tinyurl.com/wy3nhrf

__________________
 

Detailed scheme

https://visionblue.wordpress.com/tag/torsten-schauer/

Attached Images

C1M4JwJ0yno.jpg (195.0 KB, 23 views)

__________________
 

Good video

__________________
 

Live from Belarus Doug K. is improving his Muller design.



8 coils with ferrite cores sandwiched between two rotors, and each rotor
has 16 all facing nortb 2mm x 20mm size grade 52 strong neodymium magnets.
1/3 of coresvwrapped with motor winds that spin the rotor when pulsed,
2/3 are induced pickup winds that create power as it runs.
Beauty of this design is both core ends push or pull against two magnets
at once for double the rotational power and also itbhas double the
generated power from magnet the sweep past the pickup/induced
generator winds and cores.

__________________
 

Bro Mikey,

If you look at my early videos and pictures of my generator, I started with rotors at both ends of the coils. I no longer do that for a reason. It APPEARS that the flux in the core, And therefore the generated power, has a direct relationship to the MASS of the passing magnet with all other factors being the same. So which do you think will provide you with more power. A single coil with small magnets passing by both ends, or TWO coils with a magnet that is TWICE as thick passing between them? Thats why I changed my design. I could get twice as many coils on the rotor with the new design. And twice as much generated power. We learn from building, not watching YouTube videos where we are lied to about everything. Until you try BOTH ways you don’t know anything for sure.

According to what you posted his machine has 8 coils but 1/3 are used as motor and 2/3 as generator. Those numbers make no sense. You need multiples of 3 if you are talking about thirds, or a coil will be part motor and part generator. But let’s compare anyway. My big generator puts out 130 volts at 1.5 amps per coil or 195 watts. If I use 1/3 of my coils as motor coils I give up (130x 1.5)x 4= 780 watts of generated power. A STOCK razor scooter motor running on 12 amps at 24 volts costs me only 288 watts. Why give up the difference, which is almost 500 watts?

If you want to do it that way. Let each coil act as a generator coil except for a split second at Top Dead Center when it is fired as a motor coil. All coils generate. All coils act as motor for a split second. i built a circuit that did that and it worked great. You just had to spin the generator by hand to start it. Matt designed that circuit. if I had designed it, nothing would have run.

Oh, and if you haven’t cancelled out all the magnetic drag, you CAN’T spin it by hand anyway. LOL

Edit: I wanted to add a couple more things that I thought about in the middle of the night tonight and couldn't get back to sleep until I got up and added. Your rotor core can only accept a SPECIFIC amount of flux as the magnet goes past, which is determined by the mass of that core and its composition and (possibly) rotor speed. (You COULD turn too fast for saturation of the core, but not likely.) Depending on the mass of the core, you could put a magnet the size of a dime or a magnet the size of a car tire, get the SAME generated output. Until you have built MULTIPLE rotors and tried different sizes and thicknesses of magnets you have NO IDEA what the optimal size of magnet is for your particular size and composition of core. If you are going to build a GOOD rotor I would go here https://www.eplastics.com/sheets/ace...stitem17/3.000 and take a look at a sheet two or three inches thick. This allows you to use LONG 3/4 diameter magnets in your rotor, which means a lot of them. Your rotor is THICK so it won't flex, because Neo magnets will cause a thin rotor to flex badly. You drill holes in from each side of the rotor and leave a thin wall of material between the two magnets so they are attracted to each other through the material. You will never get them OUT without destroying the rotor, but they won't fly out either. For a 3/4 by 3" iron rotor core your magnets should be 3/4 in diameter and as long as you can get them so the rotor can be as thick as possible. Order your rotor material to fit your magnets, not the other way around. You have to balance overkill on mass of magnets against having a rotor that won't flex. I choose to get the magnets that are longer than I need (more mass) so the rotor can be as thick as possible. But that's just me. And then you want as short a distance between your bearings as possible and as large a diameter shaft as possible. All to keep that rotor perfectly vertical. Why is that so important. The closer the magnet is to the rotor the more the flux in the core is increased and the increase is exponential. And the less flex in the rotor, the less it pulls and pushes on the shaft which pushes and pulls on the motor and causes heat.

__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist