New device built on Gerards work. Keep doin yer home work.


New PELEX DEVICE Successfully Looped!

https://www.youtube.com/watch?v=mB1Wtve7aug

We drive Pelex with a WASHER PUMP motor in reverse as a generator which drives a battery charger LOOPED to feed the source batteries successfully driving the circuit infinitely. FREE ENERGY's possible

I'd have to build a larger Pelex device, but, when.finished, the 2200 watts necessary to max out the alternator would amplify to be an output of approximately 660,000 watts. I'd have to look into having a professional wind the coils for me because I don't have the patience. Lol

The system also successfully drives aluminum/copper/aluminum arc plates (as an energy drawing arc gap) between two high voltage transformers to bring in a much larger volume of external energy. I took the output, raised it to 360 volts. I added the Tesla hairpin circuit, then, input the low side of a neon sign transformer at 12kV. I added a custom spark gap, as stated above to come up with a massive gain in energy amplification

The hairpin is pretty neat. I don't have a high voltage power supply and I won't have one for about a month, but what I've done is use the spark gap from the relay in place of the hairpin spark gap with everything else being the same. It makes only a tiny amount of power, enough to light a led. But what's neat is the led doesn't need to touch both copper rods to light. It also lights when you hold one lead and touch the other lead to the copper, or ground one lead and touch the other to the copper, or jumper both leads of the led and just bring it near the copper an it lights that way too! So far no OU, though. I've read the hairpin circuit has stationary waves. What I might do next is fashion a long copper rod into a perfect circle (ends welded together) and have the two capacitors at opposite sides of the circle, but that will also have to wait about a month.

funny part is I'm actually waiting about a month for parts to arrive so I wont be doing too much with my experimentation either since I blew my 15kV transformer last night using the hairpin circuit.. lol


another experimenter looking for a freebie on my dime. Why is it so when we work our hearts out and spend so much to figure things out that we have to give something away that cost so much to design? I don't get it. If the shoe were on the other foot, you'd probably be a bit more understanding. I didn't do this so I could give this **** away. I did this to prove it could be done. It isn't a play I have going on here, it's a message to those who have a few abilities to do what science is saying is impossible, when nothing is impossible. Now instead of spreading sarcastic comments all over my page, It would have come back to you a bit differently if you asked me nicely the methods used to figure it out. That I would have shared, but, you've already pushed your luck. I have people here not too far below this comment who have earned the real hints as how this worked, in fact, some of my mentions are in the comments. I've already had many things happen that don't happen to the average person over sharing schematics and such. I enjoy my freedom, my family, and my life.. enough said.

the video starts with a range of 117-119 volts and it keeps varying back and forth between 115-119 volts. If I move the magnets on the motor it will jump to 125 volts and still vary all the way down from 115 and up to 125 depending on the speed of the generator. If you watch my other video showing the Pelex device you will see the input at a mere 5-7 watts @ 120 v input to 120 v @ 800-1500 watts output without one issue of losing voltage since it is utilizing the wall power to do this. The power factor has been increased and literally fixed where it originated at 39, and it is 99 in my output, which is literally incredible. I'm not sure where you see my voltage going lower.. Please explain. The input firing the motor stays on as long as I wish, I just don't have the ability to upload a video the length I would like, nor do i have anything available to provide a live feed, maybe somebody can assist and provide this to me, but, I don't feel it's necessary to provide this to anybody other than investors. I feel I really don't have to prove myself to make others feel i an genuine and not a scam artist because the devices I build are all very real.


It can be done and has been able to be done for well over 130 years.. We've just been suppressed and fortunately enough there's more and more devices that are very real on an every day basis regardless of how many brainwashed people are out there that believe the message JP Morgan has made when he started the suppression back in 1893, one year after Maxwell died. Morgan paid Lorenz to rewrite the Maxwell equations, where he eliminated the equations that would allow free energy possibilities and asymmetric magnetics, which have been released and have started to be experimented with in very specific Ivy League schools, but, it isn't over yet because to see these studies posted by the IEEE, all of us have to go out and pay $450 each to even see the results, making them all suppressed as they are not considered to be public knowledge as the suppression is still going on. Unfortunately, my devices releases massive amounts of very low frequency cold radiation and probably would never be approved for legal use in any electrical inspection, nor will it probably ever be approved by UL for a number of massive EMI (electromagnetic interferences ) caused by the device which are very similar to the operation of the Bashar STA which causes electrical elimination for conventional circuitry, elimination of standard electromagnetic transformation at high wattages and high voltages, so, the PELEX device has to be limited to an energy savings device to be used at each outlet in the home to stop the limitations it causes. I am finding it stops cellular phones from working for 50-174' away depending on it's voltage used and the size of the load. I have tried to shield it unsuccessfully, but I am determined to get past all of that and will definitely try to come up with a quick solution. There is a massive radiation released from it, but, fortunately enough it is only a very low frequency emi that travels a very long distance and I am up for ideas from anybody that I can try to eliminate this so I can get this out on the market, even if I have to sell plans and my technical expertise to help people get them going within the next year or so. My fear is taking people out of work who are in the electrical industry, so, I would much rather sell these to power companies, but, the sizes they need would release a devastating field that would most likely decimate wireless communications and other devices that I haven't checked to see if it even interfered with, such as electrical metering, etc.

__________________
 

https://www.youtube.com/watch?v=ugWfWLKl8iU

https://www.youtube.com/watch?v=Hxi4nOouXNs


So it is all spelled out in the video. No claims of anything but information. Not looking to reinvent anything. But it looks like one small AC pump does, convert 24v dc to 170v dc and over 150v AC @ 85 hz.. With the right combination of motor and pump, who knows what can happen.

__________________
 

Magnet motor generator running itself.

https://www.youtube.com/watch?v=uxa_IVJpWbg

__________________
 

So what ever happened to hitby? Did he give up? Gerrard appeared, did he offer any help to hitby?

(Serious replys only, just ignore this question if you are a two year old like genesc)

__________________
 

https://www.youtube.com/watch?v=HRfnTOQkgBU


Hey 10K I talk to HITBY every once in a while, not this month.

He is working on his free or extra energy devices and does not

keep up with the thread here everyday. But who knows, maybe

he will chime in eventually. I should call him up and see how

he is. I hope Gerard comes through with why the setup HITBY

tried didn't see the gains but I think because we didn't get

what we needed that it is unfair to say that we have replicated

the Gerard Morin high voltage transformer experiment when

we didn't. This would require a few thousand and so far we only

raise a couple hundred.

I am sure Hitby will soon let us know of any developments.

BroMikey

__________________
 

Im just tossing this out there, but maybe gerard would be able to assist hitby with parts. Seeing as how hitby and this thread have been trying to promote gerards work it would make sense .


Also i seem to remember another gentleman who was moving who said he did have the parts. Wonder what ever happened to him.

__________________
 

Footage is being edited.. and a plan to release with some updated information coming soon. sorry for the quick replies, I am reading every post when I have the time.

__________________
 

See I told you guys Gerard is going to shock the world and he

won't try to cover it all up for the next 20 years either.

We are patiently waiting for your next entry Gerard and at the

same time each of us is doing what we can to learn the real

science through our own experimentation.

Some have wondered why the POLE PIG HV works and then is

doesn't, depending on the step up and down winding losses

or resonant non resonant tuning.

I tell folks that the best thing to do is spend the time

themselves on endless hours of tuning to find to secret spot.

I know one inventor who states that with his 3 frequency

3 phase generator that the magic appears during an overlap

out of 120 degree phase mild conflict.

What happens with these 3 phase motors "SOMETIMES" is that

if the overlap that is controlled out of sinc will cause a slight

disruptive, what we call now out of wack, interaction and at some

point these 3 harmonic/ out of sinc freq's disturb the space

enough to where AMP DRAW DROPS, AND OUTPUT DOUBLES.

The magnets with coils are a marvel. Or any magnetic interaction

with coils. When we start naming all of the motors and inventions

of the past such as the "N" machine or the "Bedini" machine and so

on we find new terms for what no one really understands very well.

To me they are all the same. Or shall I say they all have some

common denominators. Then the operator of that invention

starts doing things outside of standard electrical practices looking

for something new and each one always finds something.

That will always be the case. The number of combinations

to any dinner recipe is endless and so it is with the types of

energy available to each of us. These forms span from

"everlasting to everlasting". Trying to tag each type is unending.

__________________
 

hi guys, new video is up. It will give you some insight into where this is all going.

New Video

__________________
 

Video was taken down for some quick changes.
Will be back up soon.

__________________
 

Looks like Gerard will be doing great things in his new shop . . .



will be watching . . .

hitby13kw

__________________
 

God Bless you Hitby and 10K

I am on the run with summer time AC house cooling and refrigerators

so i didn't see the whole vid yet but I am telling you that there is

a spirit in every voice and this guy is to old to try to spread the BS

because Gerard only wants to give.

I can hear the sincerity in the voice.


Someone has shelled out a few

bucks to make a lab and I am very glad. Gerard is a good place

to send your nest eggs instead of giving it to the FED's.

I have wanted to give you a call but have not time. Remodeling

the Kitchen 4 Moma too

Did a razor scooter and a E300 scooter battery bank rejuv.

Gerard is going to be magnificent.

I know you are there Hitby and it is probably best to

only answer important questions to keep the trolls starving.

Then Mikey will do his duty. It is a dirty job.


Now Gerard I want to say how much we care for your giving heart

and as a good judge of people, you Sir have impressed me.

May you experience good success in the time to come.

I know you can't fail with your desire to share.

I know people think you are just a lying money grubber who

is crazy to think extra energy is possible but these same people

are like flat tires over everything due to their former programming

from birth. They are pitiful and so just overlook it.

A peer pressure driven robot will alway drink the Koolaid.

We are routing for you SIR.

The shop is nice pressed board and the office walls are a smart

idea to post experimental designs. Never give up.

Deepest Gratitude for you final adventure

Sincerely BROMIKEY

__________________
 

it's sampull. i might comment later. for example, what are you going to use to show what it powers. what tests are there you are, have been doing? which are there. ive seen the one motor spinning something else. ive seen the transformers. is there a way to make a homemade version in what your looking for to be made. is there a way to make it for the thing it needs to be made to be done. like homemade transformers i havent started looking. but hwat are you looking for in them.
ive not watched fully. can someone explain the tests, experiments what the purpose of them are and how theyre done, to get the whole understanding of it.

__________________
 

Yes that is what we all what to know. You can rest assured when

Gerard cuts loose this next round he will have everything listed as

thousands are asking the same questions. We will have to wait.

Gerard is still building his new shop. The pole transformers are what

I started this thread for as well as the mini-motor-generators.

Me and Hitby want to see Gerard bust out his big transformers

one day. For now if I am correct on this, Gerard is working

with the pancake motors powering them with true 3 phase

rf power and this will be his first one.

Gerard has already shown the big transformers in operation

but I would like to see him do another round of those type

setups.

Mike Rowland (Central Kansas USA)

__________________
 

Hi folks, Hi gerard, thanks for sharing the video, very impressed.
Even without the technology, i'm just glad to hear another awake human who sees things clearly, the technology is a bonus.
I do hope this can get to the people, i observe that some humans and ones very close to me, are scared of things changing.
What i mean is, it appears they are scared that if big brother is not in our lives telling us what to think and do, that somehow they will cease to exist.
God speed Gerard and all.
peace love light

__________________
 

Okay I saw the video, Gerard is spiting mad using "MF" words and "F"

words and "NO BALLS" toward gutless men of this time. I have said that myself.

I am ashamed of that, but I get angry like that too. We live in a snake

pit den of corruption. And those of us who want to do good things

are being dragged through the mud of these devils.

We are just men and people say "WELL BROTHER MIKE I THOUGHT

YOU WERE A CHRISTIAN"???? Because I get cursing mad at these

dogs who steal from everybody. Gerard said that Martial Law is

now happening in Canada to where people can not disconnect

from the grid or they will be jailed.

Gerard became violent about these abusers.

Other than that 38 billion in TARGET stores built by the Gov. then

shutdown so people didn't get upset when they wanted extra

jail cells. The sheet is going to hit the fan boys and you and I are

going to find out what is inside of each of us. I have surprised

myself many times when the stuff hits and all of that talk about

how righteous you think you are goes out the window.

The Gerard energy talk was quite an education and while I love GOD

and want good things for all men, there is another element of existence

placed inside of each of you, that know we need to stay focused

on helping one another to be free from tyrants.

Gerard went on to say how China makes good things and that the

North American business man marks it up 1500 percent for doing

nothing but typing on a computer. Gerard was cursing mad.

3,4,8,10 million dollar homes for running the China man into

the ground and selling at a mark up extremely high for nothing.

Great inequality, one man works all his life like a zombie slave

to buy energy must calls "ROAD ASSIST" for a flat tire repair

because men have no manly qualities these days.

Cursing/spiting mad. I agree Gerard. I have said all those things

myself. The talk about DC RF currents was great, keep it going.

I am dumb struck because you could power your 240volt electric

stove on that tiny McCulloch. It is only 1200 watts? Yeah 1200

watts and each burner runs on 6 amps each at 240. You said

you ran all 4 burners. So that is 6000 watts.

Each burner = 1500 watts of power.

The peoples of the world are going to help each other and

when it is all said and done billions will go missing and the earth

will not easily support the growth of plant life. You will starve unless

you can produce your own power to pump water and so forth.

We need to keep working at this.

Looks like Hitby is ahead of all of us. Great going Hitby this site has

stopped looking at this.

__________________
 

Thanks Gerard.

Some notes:

• "They have 2 different names for the same thing, (Bipolar Current) = Alternating Current (AC) and Radio Frequency (RF)."
• "RF current is the way to go. We need the formula to multiply RF not AC"

True! 60HZ in the electromagnetic spectrum is called Super Low Frequency (SLF) RF.
So, the power companies must be getting over on us by having all their transformer coils tuned to resonate at the specific 60HZ RF sent down the transmission lines. They probably need do nothing more than send down a reactive signal, and all those transformers out there just resonate to make power. But they can't let you do the same thing behind your meter, or they wont be able to charge you!

__________________
 

Gerard,

We have missed your eccentricity! Welcome back to the war.

__________________
 

Gerard Morin replicator modifying pole transformer cores.

Tuning is discussed

https://www.youtube.com/watch?v=75mFUE_PjCE


https://www.youtube.com/watch?v=aebJMuyEyJg


https://www.youtube.com/watch?v=NPMFNCTBYnE


https://www.youtube.com/watch?v=gpic5FwRdIg

__________________
 

You got It MagnaMoRo.. goose bumps Magna, goose bumps

__________________
 

so, if electric is really, rf, then whats ac, and dc?

__________________
 

What do you think it is? Besides a rock band. I think it is energy

ac is energy and energy is DC and pulsed dc and AC is energy.

Some people say AC = Alternating Current and the wave is

like the ocean wave.

DAE= direct alternating energy.

I am making my own names.

Somebody help me please:r ofl:

__________________
 

Another video is in the works, where I talk about this question at length, and bring everyone up to speed. I will talk about the progress, the understanding and conclusions based on the evidence and a few tests. As well as answer questions about why things are taking so long in some areas. The footage has been shot, and now the editing process will take some time, and another one will be uploaded soon.

Talk to you guys later. Good work on here.

__________________
 

Hey Gerard

Don't mind me, I go off the end sometimes with all of the

shifting terminology. That is a good way to spearhead these

new technologies, to try to come up with some standards

found through experimentation. I gotta say that is perfect.

I have a pile of those pancake motors over here, if I could

only grasp where the entry point is for me. I have seen

those 4 and 5 foot dia. motors with the shoe or short arc

magnets just as the small one has. They are truly an awesome

work of art. So highly precise, without the slightest wobble or

deviation of balance. They are a sight to behold just by

themselves. What torque they must have as well as

possessing the needed flywheel effect we are hearing many

inventors say is a must have. Then using the bi-toroid

windings one of these motors might run itself. Bucking coils

and or shorting coils could be explored to see how much

more efficient a motor might become, as a start.

I loved your video, it was inspiring to me to hear

you say that one of these motors could run itself

and power the load.

Wow. I am looking forward to your next entry as

others are also, because learning is so important to us.

Breaking through to the new thinking, getting away from the

the old lies is what it is all about. I have never been able

to swallow the trash the schools pump out for a dollar

even though I have tried. But more importantly as you have

pointed out is that the book smarts tend to keep people

like little robins waiting for the mother bird to feed them

another worm. So you are wide open Gerard.

This conditioning of the drones is going to back fire.

It's gonna bee sweet to C motors and transformers go OU

for anybody and everybody.

Thank you so very much for helping me to see clearly.

Michael Rowland (Central Kansas USA)

__________________
 

A little guidance, a little direction goes along way.

https://www.youtube.com/watch?v=_plXBNbLjf0

https://www.youtube.com/watch?v=Lr9VzaSEZ0I

__________________
 

The other video is up.

https://youtu.be/YZ7I9XgaW3A

__________________
 

I skipped around the vid but got to come back to see

the entire film but what I saw with your 60v motor with

RF was fantastic. You are over turning all of the thieves

dens of secret knowledge. Gerard Energy way to go.

__________________
 

Thanks again Gerard!

What we are talking about here is:

Oscillation of polarity of the magnetic aether field.

So, what is usually called "electromagnetic spectrum" is really quite simply oscillation of polarity of the magnetic aether field.
The oscillation frequencies can range from (1/∞) up to (∞).

It is these osculations in the magnetic aether field that have interaction with different matter at differing frequencies.

So, there is always an emitter to tuned-receiver (or, not so tuned) relationship.

So, light is nothing more than a magnetic either frequency vibration. And so just as electricity is best generated in a copper wire as the magnetic either field cuts through at 90° (magnetic either field in motion), the receptors in our eyes are receptive to certain frequencies of magnetic aether field oscillation. And the "scattering of light" is merely shifts in the vector (direction) within the magnetic aether field (as well as vibration absorption) as it interacts with mater occupying the aether field.

MagnaMoRo

__________________
 

Hello Gerard. Some RC motor controllers send different audio tone sequences to the motor as status indicators. If you read the manual for the RC motor controller you have, it should indicate what the different audio tones/melodies indicate. This appears to be working on a principle similar to how speakers work. If you send audio frequency signals to speakers, which like motors have coils of wire and magnets, the speaker cone coil vibrates at the audio frequency tones being sent to the speaker. The RC controller must be programmed to send audio frequency tones to the motor windings which causes something in the motor such as the rotor or whatever to vibrate at the audio frequency tone being sent to the motor windings, and you can hear the audio tones.

'Radio Frequency' is just an indication of a range of frequencies which are often used in radio transmissions of one sort or another. It has nothing to do with the specific type of waveform, but just defines a range of frequencies. It depends on the exact definition from differrent sources, but it is by some sources defined as being the range of frequencies from 3 kHz to 300 GHz, although some definitions of RF extend the range down to even lower frequencies. 3 kHz is also in the range of audio frequencies. These are just definitions of frequency ranges and don't restrict or indicate the exact type of waveforms involved. AC means alternating current, which is self explanatory, and DC is direct current which means current flow is in only one direction, whether it is steady or pulsating. Both AC waveforms and pulsating DC waveforms can be of almost any frequency. Your use of 'RF' as something completely different than 'AC' makes no sense at all. These terms are describing two different things, as I have explained, but they are definitely not mutually exclusive. You can have AC waveforms in the RF frequency range, or they can be outside of the RF frequency range.

According to Tesla himself, Tesla's magnifying transmitter was meant to send power through the ground, so it was by definition a transmitter, although an exact same arrangement might possibly also be used as a receiver of the energy being transmitted through the ground from a magnifying transmitter.

If you placce two motors side by side, there will be some induction from the powered motor windings to the motor windings on the unpowered motor. The induced voltage will typically be of the same waveform type and frequency in the case of sinewaves. That is just showing the very basic concept of induction between coil windings that are fairly close together. The induced voltage waveform you are measuring on the second unpowered motor will have very little power associated with it however, due to the arrangement of the motor windings on two separate cores. You can also measure induced 60 Hz mains waveforms on wires and pieces of metal objects using a multimeter or a scope probe. All of these induced voltages will have only small power associated with them however due to the poor inductive coupling. Physicists will not call that a 'phantom current'. They will call it an induced voltage, because that is what it is.

Motors and transformers contain much of the magnetic field in the cores, but the magnetic field is not fully contained in the cores. There is always some degree of a magnetic field around motors and transformers, so you can pick up that magnetic field from nearby meters or other magnetic detection devices. That is nothing unusual.

Gerard, it is obvious that you have little understanding of basic electronics concepts. Rather than trying to explain things by mangling and misunderstanding all sorts of basic electronics concepts and terms, IMO you would be much better off to just build something that you believe is doing something unusual and ask for help from qualified people to show you how to do some proper measurements. If you really have anything unusual going on then you should have no objections to doing some proper measurements to confirm how it is really working.

__________________
level

Here is the way the new motors look for transportation.

Pay no attention to the brainwashed trolls Gerard who

can't see the writing on the wall. They are pitiful.

They are smart drive powered and look just like the motor

Gerard is working with. The reason that these motors are

taking over is because the controllers with optic sensor

as Gerard has mentioned creates a radio frequency wave

and the motor uses far less energy than the old motors.

Here someone is showing us the insides.

The industry is evolving slowly and who knows maybe

in 200 years we will have free energy at the rate

big business is run. Gerard is right, these big money

engineering firms are afraid of their own shadow

thinking someone is going to understand the new tech

apply it to another application and surpass them.

Get ready for anything now.

https://www.youtube.com/watch?v=oDPS8zSu88k

https://www.youtube.com/watch?v=1gl39KzUIuc

__________________