Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube 2020 ENERGY CONFERENCE - PRE-REGISTER NOW!!!!

2020 Energy Science & Technology Conference
PRE-REGISTER NOW!!!
http://energyscienceconference.com


Go Back   Energetic Forum > >
   

Renewable Energy Discussion on various alternative energy, renewable energy, & free energy technologies. Also any discussion about the environment, global warming, and other related topics are welcome here.

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX

Closed Thread
 
Thread Tools
  #781  
Old 03-20-2016, 11:42 AM
erfinder erfinder is offline
Banned
 
Join Date: Sep 2007
Posts: 435
Quote:
Originally Posted by Matthew Jones View Post
Screw it, it not even worth addressing a narcissistic personality disorder.

Listen to Er Finder he knows it all and he'll surly share it all with ya.

Everybody else is just a bunch low life liars trying to deceive you.
Speaking for Erfinder, I know what I know. I do not know it all. I share with whom I choose to share, I have shared a great deal with Aln in offline conversations, would enjoy an exchange with you too in spite of the fact that you insist on projecting this negative energy at me.

I am going to assume that the opening of your post was directed at me.....think what you like, call me what you will. At the end of the insults, I may loose all respect for you (won't matter to you I'm sure) however, I'll still respect your effort, yours above many others.

As far as the low life liars, yep there are a few scattered about, but you were never considered as one of them....that probably doesn't matter much to you either as its coming from one you don't respect. No biggie..

On that note, pile on the insults, at some point the I'll reach my limit, and all respect will go out the window. I won't return the insults, just keep in mind, I am human, and everyone has a limit.

You don't need me to tell you this, you have been around for as long as I have, all but a few of the real researchers, the doers are gone. I want you to know that in my honest opinion, you are one of the last ones, I think you know this. My thinking is more could be accomplished if like minds (not sure this applies as I am being called something I am not) work together towards a common goal. We are working on the same concepts, but are not looking at them from the same perspective. I welcome an exchange with you, not necessarily here, as anything we began would soon be derailed, been there...done that.

The door is open till you slam it shut.


Regards
__________________
 

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #782  
Old 03-20-2016, 04:41 PM
jettis's Avatar
jettis jettis is offline
Senior Member
 
Join Date: Jul 2012
Posts: 128
Hi All,

Erfinder, I believe, knows what he is talking about... He is the only one I know of that will share much of his hard research and all one has to do is ask him the questions and he will answer or help you answer them. Not many take the time to ask the questions and therfore the communication breaks down and goes no where.

Regarding my personal experience in talking with him I have elected to talk in person over Skype so that way we are not interrupted in our conversations. I have witnessed some of his machines and I am sorry to say I have not seen anyone else talk about adding the CEMF to the applied along with getting self oscillations of increased magnitude and frequency while the DC pulse motor is increasing in RPM. The motor gets stronger with rpm increases.

Ask the right questions people... You may find some answers.

Dave Wing
__________________
 
  #783  
Old 03-22-2016, 02:12 AM
alman's Avatar
alman alman is offline
Member
 
Join Date: Dec 2012
Posts: 51
Quote:
Originally Posted by Matthew Jones View Post
You will get black fluid from utilizing the ground side on ANY setup that utilizes a 3 battery type system. PERIOD. The lower the power the longer it takes.

Leave me alone.
Matt
Thank you, I do appreciate your answers. Sorry to bother, I will not address you unless you address me from now on, I understand I have done nothing to deserve your respect, atleast on this forum. Aln
__________________
 
  #784  
Old 03-25-2016, 09:57 PM
altrez's Avatar
altrez altrez is offline
Silver Member
 
Join Date: Jun 2009
Posts: 556
Get Ready!

Hello All,

I have been working on this project for months. If you go back and look you will see my focus has been on the power source behind all of this. I just spent $600 more dollars to try and show/prove my work. Check out the pic its just a teaser.



Lots more to come!



-Altrez
__________________
 
  #785  
Old 03-26-2016, 12:29 AM
Wistiti Wistiti is online now
Senior Member
 
Join Date: Mar 2012
Posts: 483
Quote:
Originally Posted by altrez View Post
Hello All,

I have been working on this project for months. If you go back and look you will see my focus has been on the power source behind all of this. I just spent $600 more dollars to try and show/prove my work. Check out the pic its just a teaser.



Lots more to come!



-Altrez

We supose to see what??

????
__________________
 
  #786  
Old 03-27-2016, 06:24 PM
altrez's Avatar
altrez altrez is offline
Silver Member
 
Join Date: Jun 2009
Posts: 556
Quote:
Originally Posted by Wistiti View Post
We supose to see what??

????

I have found something "I think" with the way batteries change over time when used with the Tesla Switch/3BS I need more time and money to prove it all. I am about 6% of understanding the basic 3 battery system.

Ponder this. Why does the charging battery get colder and charge faster some times?

Needed a thermal camera with 3600 heat points of reference to verify.

Still working!



-Altrez
__________________
 
  #787  
Old 03-28-2016, 01:16 AM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
No answers.

After over 8 years of working with the 3BGS system and literally hundreds of different batteries, I still have no idea. Some batteries in the 3rd position are winners, and some are not. Some actually "ice up" and others do not. Some work as negative resisters, drawing in power from somewhere, and putting out power for hours, days or weeks, and some don't. Trying to "induce" that state in a battery has frustrated me no end. I wish you EVERY success in your quest. I'd love to see SOMEONE figure it out.
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist
  #788  
Old 03-28-2016, 09:53 AM
altrez's Avatar
altrez altrez is offline
Silver Member
 
Join Date: Jun 2009
Posts: 556
Quote:
Originally Posted by Turion View Post
After over 8 years of working with the 3BGS system and literally hundreds of different batteries, I still have no idea. Some batteries in the 3rd position are winners, and some are not. Some actually "ice up" and others do not. Some work as negative resisters, drawing in power from somewhere, and putting out power for hours, days or weeks, and some don't. Trying to "induce" that state in a battery has frustrated me no end. I wish you EVERY success in your quest. I'd love to see SOMEONE figure it out.
It's down right maddening to see it work know it's over unity and not get it to work 5 minutes later.

Thank you for the wishes of success!



-Altrez
__________________
 
  #789  
Old 03-28-2016, 11:19 PM
shylo shylo is offline
Silver Member
 
Join Date: Jan 2011
Posts: 594
Hi All, Was there ever an answer why batteries flipped polarity?
I did a run for a week but was flipping between two 18 volt drill batteries and a bank of super caps.
When I put one of the lithiums' in the third spot it flipped polarity, it was up to -4volts.
It had to drain before the wall charger would work. Seems fine now.
Just curious.
artv
__________________
 
  #790  
Old 03-30-2016, 12:40 AM
altrez's Avatar
altrez altrez is offline
Silver Member
 
Join Date: Jun 2009
Posts: 556
Quote:
Originally Posted by shylo View Post
Hi All, Was there ever an answer why batteries flipped polarity?
I did a run for a week but was flipping between two 18 volt drill batteries and a bank of super caps.
When I put one of the lithiums' in the third spot it flipped polarity, it was up to -4volts.
It had to drain before the wall charger would work. Seems fine now.
Just curious.
artv
IMHO after much study with this setup I have come to believe that there is no positive or negative or even polarity as I thought I understood it. There is only a difference of potential.

Figure that out and get 12 hours of run time from a battery that should only have 6.



-Altrez
__________________
 
  #791  
Old 03-31-2016, 02:07 AM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
Run time

Or more. When you learn to harness potentials, you can do far more than double your run time. But to do that, you may have to move away from off the shelf motors to a machine DESIGNED to use potentials as a motive force and as a way to generate power. You have to use potentials EVERY way they can be used.
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist

Last edited by Turion; 03-31-2016 at 04:35 AM.
  #792  
Old 04-12-2016, 08:44 AM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
Powering a load

I've been too busy with ongoing builds to post much here for the last month, although I have started to post on several occasions and thought better of throwing stuff out there when I am still in the middle of experimenting and documenting results. But I hope I can focus at least a few of you on the use of potential difference as we have discussed it on this and the 3BGS thread to get you to think about the following:

Can a reservoir be charged from a dipole (specifically a battery) over and over again without decreasing the energy in the dipole. As I understand it, as I have seen (one way only) there is a way to make this happen, and as I have found in the literature, there are at least FOUR different ways to make that happen. Two of the ways are rather difficult, but two of them are fairly basic, although I am sure a butt load of research would have to be done to nail down the specifics. Once charged, if the reservoir is disconnected from the source, it would be capable of running loads without this reflecting back to the source. By that I mean it will not deplete the energy in the source.

If we can consistently accomplish this charging, then a thousand wires could be hooked up to that very same battery to charge a thousand reservoirs, because all these reservoirs would charge on the potential difference, and none of this would adversely affect the source.

My reason for posting this is to see if anyone else is headed in this direction, has done the research, and sees the potential. Or if it will be just one or two of us who walk this path.

Don't be shy guys. This is the key to the biggest lock on the planet.
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist
  #793  
Old 04-12-2016, 09:11 PM
RUE RUE is offline
Junior Member
 
Join Date: Jul 2014
Posts: 14
Hi Dave,
Have You got it figured out to where we can replicate it with success. That would be perfect if we could get a system like that working.Also wondering how the generators that You and Cifta were experimenting with are performing.Positive results?Thank You and keep up the good work.

Joe
__________________
 
  #794  
Old 04-13-2016, 01:16 AM
Sawt2's Avatar
Sawt2 Sawt2 is online now
Senior Member
 
Join Date: Feb 2008
Posts: 125
Quote:
Originally Posted by Turion View Post
I've been too busy with ongoing builds to post much here for the last month, although I have started to post on several occasions and thought better of throwing stuff out there when I am still in the middle of experimenting and documenting results. But I hope I can focus at least a few of you on the use of potential difference as we have discussed it on this and the 3BGS thread to get you to think about the following:

Can a reservoir be charged from a dipole (specifically a battery) over and over again without decreasing the energy in the dipole. As I understand it, as I have seen (one way only) there is a way to make this happen, and as I have found in the literature, there are at least FOUR different ways to make that happen. Two of the ways are rather difficult, but two of them are fairly basic, although I am sure a butt load of research would have to be done to nail down the specifics. Once charged, if the reservoir is disconnected from the source, it would be capable of running loads without this reflecting back to the source. By that I mean it will not deplete the energy in the source.

If we can consistently accomplish this charging, then a thousand wires could be hooked up to that very same battery to charge a thousand reservoirs, because all these reservoirs would charge on the potential difference, and none of this would adversely affect the source.

My reason for posting this is to see if anyone else is headed in this direction, has done the research, and sees the potential. Or if it will be just one or two of us who walk this path.

Don't be shy guys. This is the key to the biggest lock on the planet.
I have been working on it, i think i am heading the same direction you are, I remember someone saying "just don't let it go to ground" that stuck with me for some reason. I believe there is a way to get the "potential difference" (3bgs) moving in such a way, that as long as you keep it moving you can then tap into it and use it without depleting it. I will show it as I see it more consistently. That's what i've been doing. I would like to wind a motor like Matt had displayed earlier on in this process, do you know if the videos are still available?
__________________
 
  #795  
Old 04-13-2016, 05:50 AM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
RUE,
Working on it.

Sawt2
https://www.youtube.com/watch?v=-anNcJ_4-LM
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist
  #796  
Old 04-13-2016, 08:15 AM
liber63 liber63 is offline
Member
 
Join Date: Mar 2013
Posts: 56
Hi Dave
I have tried recently Alexkor’s Self-Charging Circuit from chapter 6 of PJKchapters. I did not have the same size of batteries as Alexkor's but it did work for me. In my tests I only needed two prime batteries in parellel in order not to be discharged a lot. So I thought to have three bank batteries, 36v to 24v like 3bgs, 24v to 12v and 12 to 36 or 48v like Alexkor's. I am sure it 'll work fine, as I have tried the two different systems and find them very satisfying. Especially if you don't load very much and leave some time for the batteries to recover and then charge them. This way I've done tests with double gain just from discharging and charging after 2 hours.
I really like to see and work and test your new idea. Just let us know which direction. Does it have any similarities with Carlos Benitez?
Un-1.jpg
__________________
 
  #797  
Old 04-13-2016, 10:51 AM
Sawt2's Avatar
Sawt2 Sawt2 is online now
Senior Member
 
Join Date: Feb 2008
Posts: 125
Quote:
Originally Posted by Turion View Post
Turion
Thank you
__________________
 
  #798  
Old 04-14-2016, 11:53 AM
mainsen mainsen is offline
Member
 
Join Date: Feb 2012
Posts: 35
Cool Alexcor+Turion system

Quote:
Originally Posted by liber63 View Post
Hi Dave
I have tried recently Alexkor’s Self-Charging Circuit from chapter 6 of PJKchapters. I did not have the same size of batteries as Alexkor's but it did work for me. In my tests I only needed two prime batteries in parellel in order not to be discharged a lot. So I thought to have three bank batteries, 36v to 24v like 3bgs, 24v to 12v and 12 to 36 or 48v like Alexkor's. I am sure it 'll work fine, as I have tried the two different systems and find them very satisfying. Especially if you don't load very much and leave some time for the batteries to recover and then charge them. This way I've done tests with double gain just from discharging and charging after 2 hours.
I really like to see and work and test your new idea. Just let us know which direction. Does it have any similarities with Carlos Benitez?
Attachment 17048
Hi liber63,

nice to see your post, because thats exactly what I also wanted to try, Turions 3 Battery system combined with Alexkors BEMF charger and a 4th (or more) battery charged by it.
Sadly my Alexkor seems to perform underunity, though it works great for refreshing and charging batteries. May I ask you about the specs of ur Alexkor, you use only the bifilar coil or additional slave coils too? Wire diameter, turns? With what battery you drive it, what batteries (and how many in series) do you charge with it?

kind regards,
mainsen
__________________
 
  #799  
Old 04-14-2016, 06:49 PM
liber63 liber63 is offline
Member
 
Join Date: Mar 2013
Posts: 56
Hi mainsen
I used the exact components of the photo i posted, only the drive battery was a 10 Ah, over three years dead and revived a bit (meaning i would be lucky if it had 60% capacity) so I used another one of the same kind (but even less capacity). Totally two parallel drive batteries. But I think it mentions somewhere that the system might work better with 24volt drive and implies good, not dead batteries! Charging batteries were 4 7Ah. I used two coils one bifilar, one slave! The specs exactly as in the book. Maybe few more turns on the bifilar. The amps from the drive were around 550miliamps. I count and found that I used much less energy from this system than using my normal charger CTEK MXS 5.
__________________
 
  #800  
Old 04-14-2016, 07:34 PM
mainsen mainsen is offline
Member
 
Join Date: Feb 2012
Posts: 35
Hi liber,
thank u very much for the info. I will try to add a slave coil too and see if it improves efficiency =)
kind regards
__________________
 
  #801  
Old 04-26-2016, 02:15 PM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
Boost circuit

Don't forget that the boost circuit allows you to keep the voltage higher than the charge battery. When you have two batteries in series and then a third battery you are trying to charge, the voltage hitting that third battery needs to be at LEAST 2 volts above the battery voltage. So if battery 3 is at 12 volts, you BETTER be hitting it with 14, or you are NOT charging it in a way that is good for the battery. If it is at 12.8, you better be hitting it with 14.8. The boost circuit allows you to do this without too much waste.

What I am looking at now is basically a "home made" shunt motor run on the 3BGS with the boost circuit. I am trying the rotor windings and stator windings in both series and parallel. This machine has TWO rotors. One for the motor, containing no magnets, and one for the generator which does have magnets.

The generator coils must be disconnected from the storage device when the load is running off it. High impedance coils produce high voltage. The circuit produces the amps. Worry about getting your voltage up and let the amps take care of themselves.
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist
  #802  
Old 04-29-2016, 03:28 PM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
WW,
If you are out there, thanks for everything. I finally figured out the magnetic polarity. It does everything you said it would do. Simply amazing.
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist
  #803  
Old 04-30-2016, 01:29 AM
Wistiti Wistiti is online now
Senior Member
 
Join Date: Mar 2012
Posts: 483
if you have something to share..... .....just share!
__________________
 
  #804  
Old 04-30-2016, 11:26 PM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
Response

Wistiti,
Now you sound like me!!

When I have something that has been thoroughly tested and iron clad results that I can post detailed instructions for others to replicate, you will see it here. Until then, I will continue to work behind the scenes with a few people I trust trying to improve on what we have.
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist
  #805  
Old 05-01-2016, 01:34 AM
Wistiti Wistiti is online now
Senior Member
 
Join Date: Mar 2012
Posts: 483
__________________
 
  #806  
Old 05-15-2016, 06:55 AM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
There's a bunch of stuff I am not yet in a position to share, but there is at least one thing I will throw out there even though I started a WHOLE THREAD on "Your Basic Coil" just to talk about this stuff and couldn't wade through the idiots to make the kind of progress I wanted. As usual, I just got together with a few folks I trust and we did the testing ourselves.

We tested welding rod, coat hanger, #12 shot, ferrite and Metglass as a generator coil core on a generator running under 4,000 RPM. While different wire configurations, higher rpm or other variables might change the results, for our purposes the ferrite was the clear winner. At higher RPM's it might not be, and I doubt we will spend the time to determine that since we are running at the lower frequencies. There are lots of kinds of ferrite and some may be better than others. We found one we like. You find yours. We wound a lot of coils to be able to put out that information, and it would have been much easier if ten different people had wound the same sized coil and tested it on the same sized rotor with the same magnets on it. But I have given up expecting that there will EVER be that level of cooperation and teamwork on this forum. The stuff we know is because we are building and testing stuff every single day. Some of it we will share.

I redid my big generator. This is the 5th time I have rebuilt it and it costs a couple hundred dollars each time to modify the parts and have them machined to new specs or replaced. Right now it is running on a razor scooter motor at 1800 RPM. It is running on 12 volts at 6 amps or 72 watts. It is outputting 170 volts DC after the bridge at 1.5 amps per coil, and there are 12 coils. YOU do the math. With the windings I have on the coils it requires 24 volts to get it up to 2800 RPM, at which point it speeds up under load. I have not done any output testing at the higher RPM because I haven't had TIME. Trying to figure out the best way to convert high voltage DC to lower voltage higher amps has been my priority.

Not only that, but we have another project, the 3BGS, that is showing results with the modifications to the basic circuit we have made that are even better than this generator, so I get sidetracked with that trying to put together a decent demo to show what we have.

And then there is Matt's motor project which SHOULD run itself and produce usable power.

Free energy is out there. You just have to do the work to get it. Oh, and it isn;t really FREE. You will spend time and money to get there.
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist
  #807  
Old 05-15-2016, 11:17 AM
citfta's Avatar
citfta citfta is online now
Gold Member
 
Join Date: Jun 2008
Posts: 1,323
What amazes me is how many people want the answers but are too lazy to do any of the work. And look how many times some idiot has posted his great idea for a free energy device and wants someone else to build it. They're too lazy to even build something based on their own ideas. Everybody wants to be a genius when it comes to theory but very few are willing to test even their own ideas.

I am done wasting time for those kinds of people. I will gladly share privately with those that have shown the willingness to do some work. The loafers and free-loaders will get nothing from me.

For Bob French, check your PM's here. I can't answer your email from my present location.

Carroll
__________________
Just because someone disagrees with you does NOT make them your enemy. We can disagree without attacking someone. This means YOU especially BroMikey.
  #808  
Old 05-15-2016, 11:52 AM
erfinder erfinder is offline
Banned
 
Join Date: Sep 2007
Posts: 435
Turion,

Back when hot topic was acceleration under load, you challenged the community to demonstrate the acceleration under load effect using air core coils. Have you accomplished that task? If so can you demonstrate it? If not do you have any ideas why you cannot accomplish the task?

Regards
__________________
 
  #809  
Old 05-15-2016, 12:59 PM
Wistiti Wistiti is online now
Senior Member
 
Join Date: Mar 2012
Posts: 483
Quote:
Originally Posted by Turion View Post
There's a bunch of stuff I am not yet in a position to share, but there is at least one thing I will throw out there even though I started a WHOLE THREAD on "Your Basic Coil" just to talk about this stuff and couldn't wade through the idiots to make the kind of progress I wanted. As usual, I just got together with a few folks I trust and we did the testing ourselves.

We tested welding rod, coat hanger, #12 shot, ferrite and Metglass as a generator coil core on a generator running under 4,000 RPM. While different wire configurations, higher rpm or other variables might change the results, for our purposes the ferrite was the clear winner. At higher RPM's it might not be, and I doubt we will spend the time to determine that since we are running at the lower frequencies. There are lots of kinds of ferrite and some may be better than others. We found one we like. You find yours. We wound a lot of coils to be able to put out that information, and it would have been much easier if ten different people had wound the same sized coil and tested it on the same sized rotor with the same magnets on it. But I have given up expecting that there will EVER be that level of cooperation and teamwork on this forum. The stuff we know is because we are building and testing stuff every single day. Some of it we will share.

I redid my big generator. This is the 5th time I have rebuilt it and it costs a couple hundred dollars each time to modify the parts and have them machined to new specs or replaced. Right now it is running on a razor scooter motor at 1800 RPM. It is running on 12 volts at 6 amps or 72 watts. It is outputting 170 volts DC after the bridge at 1.5 amps per coil, and there are 12 coils. YOU do the math. With the windings I have on the coils it requires 24 volts to get it up to 2800 RPM, at which point it speeds up under load. I have not done any output testing at the higher RPM because I haven't had TIME. Trying to figure out the best way to convert high voltage DC to lower voltage higher amps has been my priority.

Not only that, but we have another project, the 3BGS, that is showing results with the modifications to the basic circuit we have made that are even better than this generator, so I get sidetracked with that trying to put together a decent demo to show what we have.

And then there is Matt's motor project which SHOULD run itself and produce usable power.

Free energy is out there. You just have to do the work to get it. Oh, and it isn;t really FREE. You will spend time and money to get there.

Great to know you have made this progres!

As i am also a builder i know it could be really expensive... I think the real chalenge here is to highlight the working principe and to find an easy low cost way (with easy salvage component around us) to reproduce it... This way, many people with all kind of budget can reproduce it...

Keep your good work!
__________________
 
  #810  
Old 05-15-2016, 02:54 PM
Turion's Avatar
Turion Turion is offline
Gold Member
 
Join Date: Nov 2009
Posts: 2,473
Air core coils

erfinder,
Yes, I was able to get air core coils to speed up under load. I have a theory about why, and since that same theory applied to coils with cores seems to work, I am sticking with it for now. Yes, I can demonstrate it. As of now I am no longer working with air core coils. I need the core to produce the voltage I need.
__________________
“Advances are made by answering questions. Discoveries are made by questioning answers.”
—Bernhard Haisch, Astrophysicist
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

Choose your voluntary subscription

For one-time donations, please use the below button.


All times are GMT. The time now is 01:10 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers