Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube 2020 ENERGY CONFERENCE - PRE-REGISTER NOW!!!!

2020 Energy Science & Technology Conference
PRE-REGISTER NOW!!!
http://energyscienceconference.com


Go Back   Energetic Forum > >
   

Renewable Energy Discussion on various alternative energy, renewable energy, & free energy technologies. Also any discussion about the environment, global warming, and other related topics are welcome here.

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX

Reply
 
Thread Tools
  #1  
Old 04-15-2014, 10:05 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
ACMMJB Device that does not notice it load, Underunity to start with

I have decided to start my own thread, as no one can delete my **** from here.

I have no claims of overunity, but i can do claim underuntiy ( underunity is any load connected to the device does not affect the input, so bringing input down, and adding more pickup coils will or can give you overunity no matter what other say)

I dont post to much, but since this QEG **** i have to start my own thread, and share my own details for bringing peepz closer to overunity.

First of all I am Tesla inspired, and will never show any wrong Tesla patent with a device that is not it.

I can claim that any toroid device has its unique charater, that you will not come across other devices, and they wat i found out is to only build it. I dont need simulations, calculations, i discover my **** pure by testing and hooking up diff stuff, even if it doesnt makes sence, but the doesnt make sense part does boost my energy.

Im not here to crowd fund, get money or what ever ( only thing would be nice if i could get more spareparts to scale it up.

But for now i will post here what i got.

Please dont over post on this topic with theories, ima post, and if you feel like it you build it, if yr not interested then dont post here.

This is the device that i have bui,d with all its magical properties, build it with love, and do it good. No need for calculations cause i did not calculate anything sofare, only input verses output, untill you have underunity

Underunity is a device that does not recognise the loads connected to it.

This is the device
Tesla Patent 381,970 - System of Electrical Distribution

I will post all details as much as i can, now that i feel like it. Cause i cant stand peepz sharing free energy devices and never really works, or it works but peepz never get to see it, whats up with that?

Im JB and im a Coder and Builder, and ima share my stuff in this thread with anybody whois is interested.

Please dont post any TPU, ECD, QEG news in here. No links to other devices, or theories


I made a skype chatroom for whenever you feel like asking or sharing stuff,
skype:?chat&blob=eRb6wbBy_mzNF3NcqJ3yoUcD4xidHsNF-ZBDBsfMxuSBiQG6BMCIjtA26LC9UhgK-Jn4_9bt6nMuj6az0HYAu6V9iu2FQDAfoqUbyf_paFuTI6HFPlA SukHBaeP5klFBCZrSMePwmyZDX4LY7irrFhqh8zSEiNPxh15WQ X2QXYe_di--PPzVSTMxGssDs0Lm6aml_Y58ZsO_rlBsePDokQTyDxPSlcpVib eWdJ2xb7aBN1J59g

Just cope and paste it into any skype convo and it will redirect you to this chatroom,

I aint no troll ( but i can act like one as peepz say, i dont hate, i just have respects for peepz who dont bull****)

I wil post all my knowledge in here, and yr welcome to test or to drop by to see it for yr self, no tricks, no crap, just real ****)

I am JB
__________________
http://youtube.com/johnnblade
Reply With Quote
Sponsored Links

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #2  
Old 04-15-2014, 10:09 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
This was my first ACMMJB device, only thing wrong is that it was out of balance, i had to use different coils by then, but i made a new one

This is my first one, i will make another detailed movie for yall on how to build it, i know its coils, but best part is, coils work allong, no need to be precise, but if you have the same specs as i do, you will get results.

Almost done, TPU, ECD, ACMMJB, v2 - YouTube
__________________
http://youtube.com/johnnblade
Reply With Quote
  #3  
Old 04-15-2014, 10:12 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
T know when it works use a compass, if the compass spins yr doing good.

But, the compass only turns on low frequencies, dont think that you can spin the compass at max speed, cause after a while the compass stopps spinning its because the turns, vortex, tornade goes to fast for the compas to keep up, and the same for when a magnet is spinning, so you only have a limit, till what speed you can make something turn, but turning an object is waist of amps, cause the real/energy stuff uses less amps.

Testing v2 TPU ECD ACMMJB COMPASS SPINNING - YouTube
__________________
http://youtube.com/johnnblade
Reply With Quote
  #4  
Old 04-15-2014, 10:15 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Again for the show, or to test the vortex arround the ACMMJB i used a simple round magnet.

And another entertainment that is not functional but still looks good, cause this device can enetertain, and deliver serius ****, depending on frequency.

And another thing, the lower the fquency the higher the input amps,
So the higher in frequency the lower the input amps. But when to high, there is not enough amps to create a magnetic field ( ask me info you dont get this one)

Testing V2 ACMMJB TPU ECD, Tesla Egg Of Columbus spinning magnetic field test - YouTube
__________________
http://youtube.com/johnnblade
Reply With Quote
  #5  
Old 04-15-2014, 10:22 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Testing ACMMJB v2 TPU ECD Plus Joule Thief, Special Effect With Iron Wire - YouTube


There one of my first tests, iron can make the input amps go down, and from here was the start that the device does not notice the loads connected to it.

And best is, with this device you have atleast 2 outputs.
Output one is the loose coupled collector coils aka pickup coils.

Testing ACMMJB v2 TPU ECD Plus Joule Thief, Special Effect With Iron Wire - YouTube

The 2 output is using high speed switching diodes, to get the back emf ( may i call it like that ?) it concers the default setup of using diodes with a mosfet.

This 2e output did not work before cause if i light up the bulb, my input would raise another 300mA but now using 2 phases, that output also does not get noticed but the input while its a part of the main circuit
__________________
http://youtube.com/johnnblade
Reply With Quote
  #6  
Old 04-15-2014, 10:41 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Part 2 of the test with iron wire, but what i did not know then is that when my input goes down, the output goes down as well, but when using the output the input doesnt go up

Testing ACMMJB v2 TPU ECD + Joule Thief & Iron Wire Untuned part 2 - YouTube
__________________
http://youtube.com/johnnblade
Reply With Quote
  #7  
Old 04-15-2014, 10:42 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
One of my firsts tests to see how strong the field is around the toroid

Testing ACMMJB TPU ECD simple propeller test, inc compass test - YouTube
__________________
http://youtube.com/johnnblade
Reply With Quote
  #8  
Old 04-15-2014, 10:44 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
And from here i started to find out that the more picup coils you have the more power you can get out of it, and best is no drag effect. The device doesnt care it just flows on on it own frequency, but everything connected will have that frequency, unless you add a joule thief or flyback to the output.

Testing ACMMJB ECD TPU Toroid with coil from vacuum cleaner and LED - YouTube
__________________
http://youtube.com/johnnblade
Reply With Quote
  #9  
Old 04-15-2014, 10:46 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Here to find out that the device has allot of torque, but in this setup its not tuned to go any faster cause my setup is to unstable and will shake if going to fast and then shut of when tuned to high

Testing ACMMJB TPU ECD simple generator test setup - YouTube

But torque it has
__________________
http://youtube.com/johnnblade
Reply With Quote
  #10  
Old 04-15-2014, 10:48 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Here is my personal new record, cause normally i couls always light up lights, or leds, but never a motor with my output. Here i could finally run a motor

Testing ACMMJB TPU ECD QEG New Personal Record + DC Motor on Output - YouTube

So imagine you have input, and does not see the motor, but the motor can run a flywheel without disturbing the input. The possibilities are endless of this device, and again the more pickup coils, the more you get.

Testing ACMMJB TPU ECD QEG New Personal Record + DC Motor on Output - YouTube
__________________
http://youtube.com/johnnblade
Reply With Quote
  #11  
Old 04-15-2014, 10:50 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Here another setup to let the motor drive a simp,e spcalled flywheel, and it does work, but the noise is crazy/irritating as ****.

Testing ACMMJB TPU ECD QEG output load and simple gen setup - YouTube

But again more is posible
__________________
http://youtube.com/johnnblade
Reply With Quote
Sponsored Links
  #12  
Old 04-15-2014, 10:51 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
And in my last movie i proof again that input does not get affected by any load on output

ACMMJB TPU ECD Light Bulb Test Underunity - YouTube
__________________
http://youtube.com/johnnblade
Reply With Quote
  #13  
Old 04-15-2014, 10:54 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Now that i have givin a lil of info, i can say this device is the best i ever build, not even the bedini could handle this, cause some time ago i made bedinies, but the copper drag was an issue, now its solid state, no drag, only amps are used to drive the main circuit.

And that bring me to a question?

Does anybody have a good solid 2 phase circuit without using a 555 timer, and i dont need self resonance circuits as like a joule thief, cause a self resonance circuit is not also tuned to deliver the most output. It must be tunable
__________________
http://youtube.com/johnnblade
Reply With Quote
  #14  
Old 04-15-2014, 11:31 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Some lill details for now


The core is iron and zinc, and only costed me 2,99 euro from the Hema,

HEMA ijzerdraad – online – altijd verrassend lage prijzen!
Not sure if the link works, otherwise goto HEMA - verrassend lage prijzen in de online winkel and search for ijzerdraad

On that i added insulation tape so i could wind the primaries, the primaries consist of 4 parts, i dont know how many turns cause i used weight to measure turns, and sofare every part has 40 gram of copper, and with a simple multimeter the Ohms of every coil is 50ohm( aint that a coincidence with them radio/ham peepz, 50 ohm is same as a dummy load)

Every one of the four parts took me atleast 4 hours to wind a 50ohm coil

From there any 555 timer circuit with adjustable duty cycle will do, then a frequency devider, if you like phases as me ( havent done tests yet with diff frequencies) then after the frequency devider i have now 1 mosfet driver with 2 output on the high side, and the go true a resistor into the 4 mosfets connected to my coils.

All pickup coils are just wounded around the toroid and sofare i used 2.5mm and about 17 to 20 turns to capture the energy from the magneto vortex.

The wire for the primaries is
A spool of 200 gram of copper and the spool itself weighs 13grams so total 213 grams.

The primaries are 0.22 mm, brand is block, Fa-nr 325499, length 429 meters
Koperlakdraad CUL Draaddiameter 0.22 mm 429 m Block in de Conrad online shop


The first layer must be done with love and as good as posible, but second layers can be a little less perfect, take yr time to wind, have a beer chill and wind, cause it takes about 4 hours of hand winding for only 1 piece.

I added an litz wire as in the ms tpu, but those wires have no effect at all, useless to say now.

Coil 1 50.6ohm
Coil 2 50.2ohm
Coil 3 50.0ohm
Coil 4 50.6ohm

When capturing the back emf of those coils it will be above a 1000volts and enough milli amps to start lighting up a indescant light buld, but, its diodes connected between the coil comming from plus and at the end of the end of the coil, if proper in phase this output will also not affect the input.

Another good thing of this device is, that any shortcircuit on the output side will not **** up yr power supply, cause it also does not notice the short circuit.

The temperature of the device is room temp, the only thing that can get a little warm is the transistor of the joulethief connected to the output. The 3055 to transistor has some extra advantages, cause it will ring to, as other transistors dont, and one transistor the bd412 ( cant remeber exactly the name of this transistor, but it gave me 2 watts out when using that transistor for the joule thief) the to 3055 has a way allowing a way to mix high voltage with current from another source, so you can mix high unusable voltage with low voltage current and both combine a higher output, i had that yesterday, could not film it cause i burned my last to 3055 to, but i ordered new ones so in 4/5 days i can film and show that, cause i found something new, whereby voltage goes up and current goes down on output, but more lights will light, crazy **** but ima film it so you can see for yrself.

Some other facts at 15.34v and 220mA input
And the output coils give.

Coil 1 gives pure 3.48v, 61.2mA
Coil 2 gives 3.33v, 56mA
Coil 3 gives 3.7v, 66.5mA
Coil 4 gives 3.9, 52.5mA

I added 2 more pickup coils
Coil 5 4.6v, 48mA
Coil 6 4.9v, 58mA

When i short circuit the output of the joule thief i get 350+mA but no volts on output. When taking one wire from the hot on the joule thief and connected it back to the cap that gets filled by ouput by number one my buld loads up as bright as it can and so does my loose coupled led light, so that shows that i am capable of mixing current with high voltage, but the transistor of the joulethief will just diewhen i off the joule thief and switch it on cause of the surge of energy going into the circuit ( i ordered 1 high voltage transistor of 825v and about 8 amps), to see if i can use that)

Sofare my record is 2 watt out, while givin 3 watts in, but that 3 watt is only being used by the circuit, and depens on frequency. So now i need to add more pickup coils, and a more efficient circuit. ( any suggestions for a simple 2 phase circuit? Without IC?)

When my whole circuit is in resonance its about 70khz, while on signal gen it can show a signal of about 10khz when on max, and 5khz when i tuned it to the same amps out as from the input.

Amps aint a problem, now its about mixing high voltage with dc current, i was able to hook up a flyback on the output to see if i could mix like that, but it did not work, but what worked is when adding a cap in series from on source to another, like when building a fm transmitter, a loose coupling capacitor.

May you have any tests for me please let me know.

And just a question from my self, instead of shortcircuiting my circuit kn the output to see the most amps i can get out, is there another way to force my output to show its max output witout short circuiting?

Btw the device likes only load that does work, no load is low coltage but max amps, if a motor is connected it shows volts and max amps out sofare.

Any other tests i can do?, you tell me, and ima film it


Greets JB


Thats it for now!
__________________
http://youtube.com/johnnblade

Last edited by JohnnBlade; 04-16-2014 at 12:57 AM. Reason: Added links
Reply With Quote
  #15  
Old 04-15-2014, 11:59 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Besides the currents generated in the secondary coils by dynamo-magnetic induction other currents will be set up in the same coils in consequence of any variations in the intensity of the poles in the ring A. This should be avoided by maintaining the intensity of the poles constant, to accomplish which care should be taken in designing and proportioning the generator and in distributing the coils in the ring A, and balancing their effect.
__________________
http://youtube.com/johnnblade
Reply With Quote
  #16  
Old 04-16-2014, 12:03 AM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
By the shifting of the poles of the ring A a powerful dynamic inductive effect on the coils C C' is produced.
__________________
http://youtube.com/johnnblade
Reply With Quote
  #17  
Old 04-16-2014, 12:19 AM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
This is my latest version, no movie of it yet, but she is getting buffed up
Attached Images
File Type: jpg image.jpg (1.35 MB, 32 views)
__________________
http://youtube.com/johnnblade
Reply With Quote
  #18  
Old 04-16-2014, 02:33 AM
mbrownn mbrownn is offline
Gold Member
 
Join Date: Jan 2011
Posts: 1,637
Your kinda lonely on this thread

Did you try spinning the generator and using pick up coils at the same time?
Testing ACMMJB TPU ECD simple generator test setup - YouTube plus Testing ACMMJB TPU ECD QEG New Personal Record + DC Motor on Output - YouTube

Measure the speed and torque and add that to your output. I personally believe that magnamotive force is a free by-product so this should give you a new record. you may have to alter the position of your pickup coils because having a lump of iron close to your coils will change the shape of the magnetic field. The iron will also introduce a loss so the pickup coils will see a little bit less but I believe the total will be greater
__________________
 
Reply With Quote
  #19  
Old 04-16-2014, 02:59 AM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Hahaha i know especially just got kicked out of be-do qeg forum,

Quote:
Originally Posted by mbrownn View Post
Your kinda lonely on this thread

Did you try spinning the generator and using pick up coils at the same time?
I did, and i added my strongest neo magnets, while turning, and i did get energy on my detector coils, and strong to, but when the those pickup coils are to close they start to vibrate to ( you can really feel the coil shaking in yr hand while the magneto force slices true), and cause a drag on the motor, and that is back to the copper drag effect.

Testing ACMMJB TPU ECD simple generator test setup - YouTube plus Testing ACMMJB TPU ECD QEG New Personal Record + DC Motor on Output - YouTube

Measure the speed and torque and add that to your output.
If i had a rpm meter i would have tested that to, i owe you this one for ones i have a rpm meter.

I personally believe that magnamotive force is a free by-product so this should give you a

Do you mean the magnetic vortex around the device, and yes, cause thats where you have to harvest from, collect as much spining magnetic force true the pickup coils. But when forexample placing 2 detector coil behind eachother, close to 2 primarie coils the first one will take more energy, and leave a bit for the 2e coil behind it, so no real sharing of same force, but when adding more collector coils on the toroid it will share, but it makes a big difference if you hook everything up the right way, ac doesnt really mean you can hok up the light any way you want to, trying both ways to light an ac bulb will show you different amp usage on output.

you may have to alter the position of your pickup coils because having a lump of iron close to your coils will change the shape of the magnetic field.
Tesla mentioned that i could add iron wire over the pickup coils to boost the effect, but that iron wire is real stiff to bent or turn, but i might try that to, cause it will magnetize that iron to, and boost the effect more since we are harvesting magnetic force.


The iron will also introduce a loss so the pickup coils will see a little bit less but I believe the total will be greater
Consider the extra iron just a layer to boost the field, the field already turns, so hook up anythjng that can collect the moving field, instead of makin a magnet turn around.

Thank you Brown!


Greets JB
__________________
http://youtube.com/johnnblade
Reply With Quote
  #20  
Old 04-16-2014, 03:07 AM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
@MBrown,

When you talked of the generator did you mean the dc motor that turns the vacuum cleaner coil ( my socalled flywheel)

Testing ACMMJB TPU ECD QEG output load and simple gen setup - YouTube

( sorry the ringing is an irritating noise)
__________________
http://youtube.com/johnnblade
Reply With Quote
  #21  
Old 04-16-2014, 04:15 AM
mbrownn mbrownn is offline
Gold Member
 
Join Date: Jan 2011
Posts: 1,637
I cant open that link.

No, this one Testing ACMMJB TPU ECD simple generator test setup - YouTube
__________________
 
Reply With Quote
Sponsored Links
  #22  
Old 04-16-2014, 04:33 AM
Joit Joit is offline
Gold Member
 
Join Date: Sep 2008
Posts: 1,993
johnnblade
You really get kicked from the QEG forum?

You asked some legit questions, what a lot as first do. I dont even see it offending in a way like you did post it at the Witts thread from Vidbid.
Thats really a poor reputation when they act like this, it been so simple questions what are easy to answer. To start more and more to stink.
__________________
Theorizer are like High Voltage. A lot hot Air with no Power behind but they are the dead of applied Work and Ideas.
Reply With Quote
  #23  
Old 04-16-2014, 04:38 AM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
That one is cools, but since on low frequency it uses more amps for input, but with that same power you could run 2 rotors, when placing the device sideways, so 2 flywheels might be posible.

As soon as the frequency goes to high the amp draw on input goes down, whereby the field also get smaller and to fast for the rotor to keep up. So after max power the motor just stops and shakes left and right. But that doesnt mean you cant pickup energy around the device, even if the motor stop running.



Quote:
Originally Posted by mbrownn View Post
__________________
http://youtube.com/johnnblade
Reply With Quote
  #24  
Old 04-16-2014, 04:43 AM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Quote:
Originally Posted by Joit View Post
johnnblade
You really get kicked from the QEG forum?

Yeah, cause of my last post, but cools they want peepz who they can fool better.

You asked some legit questions, what a lot as first do. I dont even see it offending in a way like you did post it at the Witts thread from Vidbid.
Thats really a poor reputation when they act like this, it been so simple questions what are easy to answer. To start more and more to stink.
See i dont mind they device, but the whole hype around just doesnt sound right.

We all seen more free energy devices come and go, and i know a principle can work like this, and even have ways to boost a principle like that.

But first presenting a device out of the blue, crowd funding, bussiness model, hope, and all other exotic stuff. But never yet simple stuff like we all show when we show.

To keep it simple, Yr right

Greets JB
__________________
http://youtube.com/johnnblade
Reply With Quote
  #25  
Old 04-16-2014, 05:23 AM
mbrownn mbrownn is offline
Gold Member
 
Join Date: Jan 2011
Posts: 1,637
Quote:
Originally Posted by JohnnBlade View Post
That one is cools, but since on low frequency it uses more amps for input, but with that same power you could run 2 rotors, when placing the device sideways, so 2 flywheels might be posible.

As soon as the frequency goes to high the amp draw on input goes down, whereby the field also get smaller and to fast for the rotor to keep up. So after max power the motor just stops and shakes left and right. But that doesnt mean you cant pickup energy around the device, even if the motor stop running.
What your telling me is it will be a balancing act.

So maybe a lighter rotor and closer to the toroid to give a higher speed, I believe torque will be proportional to amps so maybe run it at maximum amps. Your recovery coils would have to be tuned to operate at that frequency too, a lot of work and maybe impractical. The rotor shaft could pass through the toroid.
__________________
 
Reply With Quote
  #26  
Old 04-16-2014, 05:33 AM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Best is just to harvest most of the field around the device, using a rotor can slow it down when on moment, but when adding litle presure to the rotor the rotor wil go faster.

tesla would also connect 2 or 3 of these devices in series or paralell, cause one can run a 555 timer circuit and power a flyback, so one can run another, and you just add pickup coils, but input stays the same.

Now im trying to mix high voltage with the picked up currents. But my TO 3055 broke down, and waiting for a new order to come in.

The coils will give any effect on any frequency, its only finding the sweet spot of where the most power comes out of, and once all is in resonance, the whole,circuit and everything connect runs at that frequency, and from there its looking arround again, and testing new setups to see what make the light shine more brighter then before.



Quote:
Originally Posted by mbrownn View Post
What your telling me is it will be a balancing act.

So maybe a lighter rotor and closer to the toroid to give a higher speed, I believe torque will be proportional to amps so maybe run it at maximum amps. Your recovery coils would have to be tuned to operate at that frequency too, a lot of work and maybe impractical. The rotor shaft could pass through the toroid.
__________________
http://youtube.com/johnnblade
Reply With Quote
  #27  
Old 04-16-2014, 04:51 PM
ewizard's Avatar
ewizard ewizard is offline
Gold Member
 
Join Date: Jan 2010
Location: Outside the Matrix
Posts: 1,122
LOL - I like your philosophy for building as you said in the first post. I haven't had a chance to read the rest here but will a while later. Good luck in your builds
__________________
There is no important work, there are only a series of moments to demonstrate your mastery and impeccability. Quote from Almine
Reply With Quote
  #28  
Old 04-16-2014, 06:36 PM
Pembelton's Avatar
Pembelton Pembelton is offline
Junior Member
 
Join Date: May 2012
Posts: 13
Quote:
Originally Posted by JohnnBlade View Post
And that bring me to a question?

Does anybody have a good solid 2 phase circuit without using a 555 timer, and i dont need self resonance circuits as like a joule thief, cause a self resonance circuit is not also tuned to deliver the most output. It must be tunable
You may want to check the circuits in this thread?

Tesla Patent 382282, and all related to his transformers/converters

They may help, this guy is doing the same thing you are doing.
__________________
 
Reply With Quote
  #29  
Old 04-16-2014, 11:17 PM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
@Ewizard, Thnx!

@Pembelton, Thnx for the link, i havent seen that post, but i will check it out.



Now im busy winding an exciter coil, and see what extra effects i can get out of that.

Greets JB
__________________
http://youtube.com/johnnblade
Reply With Quote
  #30  
Old 04-17-2014, 06:56 AM
JohnnBlade's Avatar
JohnnBlade JohnnBlade is offline
Senior Member
 
Join Date: Jun 2009
Location: Netherlands
Posts: 150
Made an extra coil to be used in tests with the ACMMJB

I used about 50 grams of copper, 0.22mm, +-980/1000 turns

The core is a plastic pipe with a diameter of 4.7cm

Have not hooked it up to my multimeter to measure the ohms, my thumb needs a rest from winding this coil

Testing ACMMJB TPU ECD QEG Added an extra pickup exciter coil - YouTube

Greets JB
__________________
http://youtube.com/johnnblade
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

Choose your voluntary subscription

For one-time donations, please use the below button.


All times are GMT. The time now is 04:42 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers