Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube 2020 ENERGY CONFERENCE - PRE-REGISTER NOW!!!!

2020 Energy Science & Technology Conference
PRE-REGISTER NOW!!!
http://energyscienceconference.com


Go Back   Energetic Forum > >
   

Renewable Energy Discussion on various alternative energy, renewable energy, & free energy technologies. Also any discussion about the environment, global warming, and other related topics are welcome here.

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX

Reply
 
Thread Tools
  #7591  
Old 05-12-2015, 12:10 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Mark, this is what your good friend said.

Quote:
Originally Posted by Ufopolitics View Post
Hello my friend Midaz, Hello to All,


Ok,Midaz, after we exchange some mails, I think I've got your idea and points.

This concept will work, no doubt about that, and I believe you are right about concentrating the magnetic field within a single coil will 'compact' (let me say it this way) the strength in lesser poles and will not split coils in two. This splitting deviates the bisector angle,or it becomes two bisectors...either one, and yes, it will weaken it somehow. I was going by flux transfer at common shared coils from one to the other...

I like to try this in a Radio Shack first...and see what it does.

If I got it right, the CAD Diagram should look like below:


[IMG][/IMG]

The only thing that must be done for it to be timed properly, would be to move for a short angle the brushes towards the rotation sense...like 5 to 10 degrees in order to avoid bisector engagement between stators and coil being fired.

Either move the brushes...or rotate both commutators to proper angle (counter to rotation) when assembling rotor, then have brushes at exact alignment to stators center.

So, yeah, let's give it a try friend...we never know, we are all experimenting here....and this is a 'Democracy' here in the Open Source spirit...

I like the simplicity of this configuration...and like I said...You are right, it makes sense...You may have seen what I have missed prior when dissecting the three poles and starting to walk into the All North concept.

For comparison purposes I will wind the RS Motor this way with the same number of turns and gauge, as I did when I made the video where N-S Pairs versus All North Pairs was made, differentiating from the all N Pairs that I would try to fit the two coils total turns into just one coil and two poles.

I will try to "squeeze" this new project in front of my BIG pile of pending work...


Regards Friend


Ufopolitics
I talk about regenerative acceleration.. With singular coils

Add this to your photo bucket!
Attached Images
File Type: jpg image.jpg (82.9 KB, 7 views)
__________________
 

Last edited by Midaztouch; 05-12-2015 at 12:13 PM.
Reply With Quote

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #7592  
Old 05-12-2015, 12:12 PM
Ufopolitics's Avatar
Ufopolitics Ufopolitics is offline
Platinum Member
 
Join Date: Feb 2012
Location: US, Florida
Posts: 5,009
To All other Members attending this Thread

To All other Members attending this Thread,

I have exposed here a serious amount of information over a period of more than Two Years ago. It could be observed in all my main Public Channels.

YouTube Channel

UFOPOLITICS.COM

Graphic Albums

Plus all the text written on this entire Forum, mainly in my main Four Threads here.

It could be understood even by an 'average' mind that all this work has consumed a great deal of time and I have uploaded with completely good will and free access to anyone that would like to review, copy or reproduce without even to login.

It has come the time now that you tell me what we all do...and I consider it is only two ways to go here.


1-Ask the Administrators to close this Thread, and I will delete all related material, and close all related channels above, which would take me minutes to execute. Some of them, for my own development and research, I will just convert them to completely private sites, without access to public viewing or any free discussion.

Then All of You could migrate to this guy's thread and keep working there with him.


or

2-Help me to get rid of this annoying guy by writing to the Administrators of this Forum and requesting to completely Ban him from this entire Forum.


At this point I can not stand this guy anymore, his disgusting attitude towards my work, as his repetitive and harassing actions, trying to set me against everyone here, to diminish all my work, over and over, has gotten to top the glass of my patience.


I am sorry, but time to me is ESSENTIAL, in order to be working in a peaceful environment I do not like to be disturbed, having to enter every time about the same, over and over arguments with this person...I really do not need this, and I am NOT willing to continue with the same BS arguments and reading every morning the same BS from this harassing guy.


If I just get "silence" from all of you, I will interpret this silence as to go for the First (1) Option, then I will proceed to execute.


Many thanks for taking the time to read all this above and help me to reach a final decision, and I am sorry for such sad circumstances.





Respectfully



Ufopolitics
__________________
 

Last edited by Ufopolitics; 05-12-2015 at 12:19 PM.
Reply With Quote
  #7593  
Old 05-12-2015, 12:21 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Raul

I call you bluff!

Let have a peaceful debate.

None of your motor designs that we have talked about have 0 magnetic drag when collecting energy from the collapsing Field.

That's a fact!

Post any of your diagrams of your motors with acceleration and we can talk!

Midaz

I vote #1
__________________
 

Last edited by Midaztouch; 05-12-2015 at 12:29 PM.
Reply With Quote
  #7594  
Old 05-12-2015, 12:28 PM
grounded grounded is offline
Junior Member
 
Join Date: Apr 2015
Posts: 29
swords at dawn
__________________
 
Reply With Quote
  #7595  
Old 05-12-2015, 12:28 PM
Ufopolitics's Avatar
Ufopolitics Ufopolitics is offline
Platinum Member
 
Join Date: Feb 2012
Location: US, Florida
Posts: 5,009
Quote:
Originally Posted by Midaztouch View Post
Raul

I call you bluff!

Let have a peaceful debate.

None of your motor designs that we have talked about have 0 magnetic drag when collecting energy from the collapsing Field.

That's a fact!

Midaz

Richard Bates,

READ ME WELL!

I do NOT WANT to have absolutely ANY debates with You.

This is called HARASSEMENT!

This is called BULLYING!!

This is MY THREAD!

YOU HAVE YOUR OWN THREAD, POST THERE!!...NOT HERE!!

Wasn't that the purpose of opening it?

Obviously it was not, Your main "agenda" is to UPSET MYSELF

And let me say this, you are doing very well so far, because I am VERY UPSET.


I am GONNA START TAKING ALL THIS INTO A VERY PERSONAL LEVEL


I AM FED UP WITH YOU!


Understand that?



RAUL LORENZO
__________________
 
Reply With Quote
  #7596  
Old 05-12-2015, 12:35 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Raul

You don't want to debate because YOU....HAVE....NOTHING.

Instead of taking about collapsing fields, you just want to see a million view.

Collapsing fields and asymmetric motors is important


Midaz
__________________
 
Reply With Quote
  #7597  
Old 05-12-2015, 12:42 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Quote:
Originally Posted by Ufopolitics View Post
**** you!

*******

FúCK Yoú Ashole

Raul

Your list.

Quote:
Originally Posted by Midaztouch View Post
Come on Raul/UFO

What!? Are you going to do like you did before!?

Use racial slurs
profanity
Belittling
doctored emails
Post my home address
home telephone number
Private email addresses
All cellphone info
Other Members personal info
Fake medical records
Then lie to the admin and ask them to ban me

What next from you!?

I'm helping people do the singular coil = A1MoGen motors correctly! I don't want to fight with you. I'm just helping. You had a mistake. If you want all the credit, you can have it but DONT mess up my A1MoGen design.

Be cool

Midaz
Raul, I'm sure people respect and trust you... Mark, this is the way Raul truely is! It wasn't me.

Midaz

Raul like I said, talk about collapsing field or please stop wasting these people time. You can close this thread. It's up to you
__________________
 

Last edited by Midaztouch; 05-12-2015 at 12:46 PM.
Reply With Quote
  #7598  
Old 05-12-2015, 12:46 PM
grounded grounded is offline
Junior Member
 
Join Date: Apr 2015
Posts: 29
Quote:
Originally Posted by Midaztouch View Post
None of your motor designs that we have talked about have 0 magnetic drag when collecting energy from the collapsing Field.
ive tried pair winds, as well as singular coils, and they both had drag when collecting energy.

unfortuntatly with just a mini 5 pole, it wasnt a fair test to compare the winds, as it wasnt really possible to wind 3 poles, for the singular coil format. only 2 poles fit neatly, without wrapping round the core shaft, and obviously made it underpowered, and generated less, so ill reserve comment for that, till a later date, when i know more.
__________________
 
Reply With Quote
  #7599  
Old 05-12-2015, 12:50 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Quote:
Originally Posted by grounded View Post
ive tried pair winds, as well as singular coils, and they both had drag when collecting energy.

unfortuntatly with just a mini 5 pole, it wasnt a fair test to compare the winds, as it wasnt really possible to wind 3 poles, for the singular coil format. only 2 poles fit neatly, without wrapping round the core shaft, and obviously made it underpowered, and generated less, so ill reserve comment for that, till a later date, when i know more.
The 5poles don't work. The motor are too small. You need more poles to adjust the gen brushes

Thank you though.

Midaz

You can do it with a motor the size of Mark's
Attached Images
File Type: jpg image.jpg (32.8 KB, 5 views)
__________________
 

Last edited by Midaztouch; 05-12-2015 at 12:54 PM.
Reply With Quote
  #7600  
Old 05-12-2015, 12:54 PM
Rl2003's Avatar
Rl2003 Rl2003 is offline
Senior Member
 
Join Date: Jul 2008
Posts: 174
Sad State of Affairs

UFO,

Hello my friend, I started reading and building from the beginning of your thread and know how much time you have put into this. (Freely)

This guy has been a thorn in your side for some time now. I it a big WEB, he can go preach his side elsewhere, if he has followers let them go, [B]but I vote to keep him out... [/B

If experimenter's want to build your work, they should be free to do this without impedance. Right or wrong. Period...

Mark
__________________
 
Reply With Quote
  #7601  
Old 05-12-2015, 12:56 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Quote:
Originally Posted by Rl2003 View Post
UFO,

Hello my friend, I started reading and building from the beginning of your thread and know how much time you have put into this. (Freely)

This guy has been a thorn in your side for some time now. I it a big WEB, he can go preach his side elsewhere, if he has followers let them go, [B]but I vote to keep him out... [/B

If experimenter's want to build your work, they should be free to do this without impedance. Right or wrong. Period...

Mark

This is not sad! We are talking about Asymetric motors on a open form. I've been posting regularly on this thread since Feb 2013... Around 90% of my 479 post are on this thread.

I'm talking facts! Nothing fake.

Midaz
__________________
 

Last edited by Midaztouch; 05-12-2015 at 01:12 PM.
Reply With Quote
  #7602  
Old 05-12-2015, 12:57 PM
Ufopolitics's Avatar
Ufopolitics Ufopolitics is offline
Platinum Member
 
Join Date: Feb 2012
Location: US, Florida
Posts: 5,009
An American Citizen as a Kindergarten Teacher in Japan

An American Citizen as a Kindergarten Teacher in Japan?...Come on!

Let me ask You this Richard Bates...why an American Citizen should go that far to just teach Kindergarten Levels of Education in such a remote Country like Japan, with such radical different cultures, language, etc compared to US?

According to your many posts here you are not happy there, so much pollution, riding a bike back and forth with two kids on board on such populated Country, very risky!...your life does not seem to be that grateful at all that we may say...

And...that I am aware off...Japan is not so desperately requesting Kindergarten Teachers to the point of extending their agenda overseas...

Is there something that serious preventing you from enjoying the good Life Style of the Country where you were born?
__________________
 

Last edited by Ufopolitics; 05-12-2015 at 01:01 PM.
Reply With Quote
  #7603  
Old 05-12-2015, 01:02 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Quote:
Originally Posted by Ufopolitics View Post
An American Citizen as a Kindergarten Teacher in Japan?

Let me ask You this Richard Bates...why an American Citizen should go that far to just teach Kindergarten Levels of Education in such a remote Country like Japan, with such radical different cultures, language, etc compared to US?

According to your many posts here you are not happy there, so much pollution, riding a bike back and forth with two kids on board on such populated Country, very risky!...your life does not seem to be that grateful at all that we may say...

And...that I am aware off...Japan is not so desperately requesting Kindergarten Teachers to the point of extending their agenda overseas...

Is there something that serious preventing you from enjoying the good Life Style of the Country where you were born?
Even thou Japan is beautiful and the people are friendly... no one cares about your off topic info!

But what we do care about is your acceleration under load video. Can you post the CAD for that motor?

Midaz
__________________
 

Last edited by Midaztouch; 05-12-2015 at 01:13 PM.
Reply With Quote
  #7604  
Old 05-12-2015, 01:07 PM
wantomake's Avatar
wantomake wantomake is offline
Silver Member
 
Join Date: Mar 2010
Posts: 905
agree with Ufo

Quote:
Originally Posted by Ufopolitics View Post
To Aaron Murakami and All Administrators of this Forum,

Please, this guy above keeps annoying here by creating confusion on this Thread between all members trying to work based on My Designs.

This Guy has another thread where he can expose all his 'concepts', even though ALL he has exposed there is a DERIVATIVE from My Original Work, but I don't mind, since this is a public disclosure and Open Source material.

All I expect is to refrain within his own thread, and whoever would like to follow him, is very free to do so.

I hope you could resolve this issue here as soon as possible.

On a 'Parallel Note'...I am really thinking and doubting about disclosing here any more future material, no matter how important it may be, If Members like this guy above are allowed to interfere, harass and create confusion freely without being controlled properly by the Administrators of this Forum.


Respectfully


Ufopolitics
Dear Admin,
I totally agree with Ufopolitics. Midaztouch is not following forum rules established to keep all civil. Obviously midaz is trying to derail and disrupt this thread. I'm surprised it has gone on for this long.

If there is no rule control here, than how can we as a forum continue to grow and learn as this was intended to start with.

All who believe as I do should state these same thoughts and requests.

Thanks my old friend Ufopolitics, you have been a great mentor and blessing to this forum. It would be a great loss to us all.

I support you old friend,
wantomake
__________________
 
Reply With Quote
  #7605  
Old 05-12-2015, 01:17 PM
Ufopolitics's Avatar
Ufopolitics Ufopolitics is offline
Platinum Member
 
Join Date: Feb 2012
Location: US, Florida
Posts: 5,009
Quote:
Originally Posted by Midaztouch View Post
The 5poles don't work. The motor are too small. You need more poles to adjust the gen brushes

Thank you though.

Midaz

You can do it with a motor the size of Mark's


This guy's history on building Asymmetric Motors is very poor, as a matter of fact...he has only built one (1) single motor, in just Two(2) kind of Asymmetric windings methods...The First one and old method posted by me here about the North-South...and now his "invention" about Single Coils, which is nothing more than a DERIVATIVE from My All North Machines displayed here before his small brain got dimly illuminated with this limited and narrow minded idea...

The very first Thread that I started here was about pulsating a Single Coil...and that was a very long time ago, I did that in order to demonstrate - at small scale- the benefits of Coil reversals and Radiant Energy generation.

What he is saying above about a Five Pole not being "suitable" for an Asymmetric Method is a complete farce, a lie, a very false statement...without even "touching" that kind of motor in his entire and very miserable life...

However, it DOES demonstrates His "Incredible" Ability to Lie and set confusion here


That statement this guy cited above is called Wrong Assumptions without any proven fundamental knowledge...

And that is a serious/fatal error for any Scientific Research and Development Community.

But He is just like that...he opens his big mouth without engaging it with his very small brain. Unfortunately for him...this is "business as usual" in his every day life.

Animal rationality...We could "pet them"...train them...feed them, but never allow them to take over our judgement calls...or it will be a complete chaos.


Ufopolitics
__________________
 

Last edited by Ufopolitics; 05-12-2015 at 01:34 PM.
Reply With Quote
  #7606  
Old 05-12-2015, 01:19 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Two people support their "old friend"

This forum has over 1500 members!


I talk about relevant asymmetric motor information and facts!

Midaz
__________________
 

Last edited by Midaztouch; 05-12-2015 at 01:53 PM.
Reply With Quote
  #7607  
Old 05-12-2015, 01:33 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Quote:
Originally Posted by Midaztouch View Post
I invited DADHAV to our group because I got tired of the runaround. I needed a big boy to set thing straight. And he did his thing! (I like the way John does his testing. So professional!)...

Using proper equipment and a RC plane propeller, he proved, with out a shadow oF doubt, that UFO's 5pole motor was far less superior than the OEM.


Keep it Clean and Green
Midaz

The torque on the all north 5 pole pair wind was in doubt. The OEM is good. I reviewed the test results many times and asked many questions.... And took notes!

You new guys are doing the same test we did last year! It's over! The OEM won! fair and square.... Fact!
At that time I was bias for our asymetric motors!

Motors don't lie! They do what they are going to do.
Midaz
__________________
 

Last edited by Midaztouch; 05-12-2015 at 01:51 PM.
Reply With Quote
  #7608  
Old 05-12-2015, 02:01 PM
Ufopolitics's Avatar
Ufopolitics Ufopolitics is offline
Platinum Member
 
Join Date: Feb 2012
Location: US, Florida
Posts: 5,009
Quote:
Originally Posted by Midaztouch View Post
The torque on the all north 5 pole pair wind was in doubt. The OEM is good. I reviewed the test results many times and asked many questions.... And took notes!
"Notes and Questions", no matter for how long of a time is done means absolutely nothing.

ONLY BUILDING IT YOURSELF COULD GIVE YOU ANY ANSWERS.

But, unfortunately:

YOU HAVE ZERO EXPERIENCE BUILDING ANY ASYMMETRICAL SMALL NOR MEDIUM SIZED MOTORS!, EXCEPT ONE (1) AND BADLY PUT TOGETHER!!

Quote:
You new guys are doing the same test we did last year! It's over! The OEM won! fair and square.... Fact!
At that time I was bias for our asymetric motors!

Motors don't lie! They do what they are going to do.
Midaz
"WE DID"?...better said "THEY DID"...You have done absolutely ZERO Building other than a terrible motor that keeps sparking and releasing loose wires at all times...not tight, not well built for all the time involved "taking Notes and asking Questions" for over two years on the "one and only" motor ever touched by your CLUMSY hands!


HOW MANY TIMES DID YOU HAVE TO WIND-REWIND YOUR FIRST EVER AND ONLY BUILT MOTOR, BEFORE YOU FINALLY GET IT TO POORLY RUN?...BECAUSE, HONESTLY I LOST THE COUNT!...

What you do have for sure is a Bi-Filar Snake Tongue and a Big Mouth not well engaged with your very small brain!


What else can we all expect from you, but all you are displaying here so far...?
__________________
 

Last edited by Ufopolitics; 05-12-2015 at 02:21 PM.
Reply With Quote
  #7609  
Old 05-12-2015, 02:16 PM
Dfortune Dfortune is offline
Member
 
Join Date: Aug 2011
Posts: 39
Why the fighting again.... stop it ...childrens!

Here is your homework:

user CP > edit ignore list > type in user name here > clic "okay"

Do not quote bad remarks of anyone...

Be happy ....

Class dismiss
__________________
 
Reply With Quote
  #7610  
Old 05-12-2015, 02:23 PM
Ufopolitics's Avatar
Ufopolitics Ufopolitics is offline
Platinum Member
 
Join Date: Feb 2012
Location: US, Florida
Posts: 5,009
Quote:
Originally Posted by Dfortune View Post
Here is your homework:

user CP > edit ignore list > type in user name here > clic "okay"

Do not quote bad remarks of anyone...

Be happy ....

Class dismiss
Sorry DFortune, but I see that "ignore button" as a very small band aid on a huge Cancer Tumor...it will keep developing...so, the best way is to remove it completely all the way from its roots!
__________________
 
Reply With Quote
  #7611  
Old 05-12-2015, 02:35 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
Raul

Machine made his motor with 20.5 AWG @ 25 turns per coil
And the rest of us/team/we used 18awg @ 15 turns per coil
With these specs, which had more torque?


Machines motor was faster. Why?


Keep it Clean and Green
Midaz

Yes Raul, you know I had cancer... I got your joke.... Your a real piece of work
__________________
 

Last edited by Midaztouch; 05-12-2015 at 02:44 PM.
Reply With Quote
  #7612  
Old 05-12-2015, 02:39 PM
Dfortune Dfortune is offline
Member
 
Join Date: Aug 2011
Posts: 39
Attention to something is feeding it

When you ignore something it starves to death or goes away to feed from someone who gives it attention.

Your choice as always

I choose the smiling path.
__________________
 
Reply With Quote
  #7613  
Old 05-12-2015, 04:34 PM
admin's Avatar
admin admin is offline
Energetic Forum Admin
 
Join Date: Feb 2007
Posts: 218
Exclamation under review

We are currently reviewing this thread due to complaints. Thank you for your patience.
__________________
Energetic Forum Administrator
http://www.energeticforum.com
Reply With Quote
  #7614  
Old 05-12-2015, 07:07 PM
HuntingRoss HuntingRoss is offline
Senior Member
 
Join Date: Sep 2014
Posts: 271
Integrity

It's not for anyone of us here to talk about banning a member from the forum as UFO suggests.

But I do agree that the conduct of Midaz on this thread is disruptive. The last two pages are just hostile remarks between UFO and Midaz. Sam has probably lost the track of his last post where I asked a question relating to his motor.

The more basic point for me is this. The last time there was a huge blow up, Midaz stated in most emphatic terms that he would not come back on this thread. For a short time that lasted and then he returned.

So, Midaz. If you are a man of principles, a man of honour, then withdraw from this thread and pursue your motor on your own thread. There is nothing to be gained from hounding UFO or anyone else for that matter.

UFO. It is your right to do all the things that you said, closing down open access links, but is that what you really want. I suspect not. I would be pissed not to have access but ultimately the decision is yours.

It's been fun

Good Hunting

mark
__________________
 
Reply With Quote
  #7615  
Old 05-12-2015, 07:48 PM
Ufopolitics's Avatar
Ufopolitics Ufopolitics is offline
Platinum Member
 
Join Date: Feb 2012
Location: US, Florida
Posts: 5,009
@ All,

Ever since this person started his 'innovative' and creative idea about single coils, it was an automatic requirement on his end to start criticizing and minimizing all my work.

Ever since he opened his own thread, he has been using my own Diagrams, text, posts, comments to set in ridicule all my work, bad mouthing me personally to extreme situations.

However, I have not posted in that thread not even one single time.

Now he is accusing me that the Original Three Pole Motor was not my own design...and threatening me to "keep my mouth shot"...

I still have the original testing films and original model from that specific motor, since it was the first one that started showing me all the Radiant Energy effects that I have mentioned on my very first thread on this Forum.

What I really find unacceptable is that this guy could harass as he pleases around this forum,....and no administrator restricts his big mouth and small brain.

Whenever Member Garry Childers uploaded his video about testing results from all asymmetrical small motors versus OEM...this guy jumped over Garry Childers like a resort...accusing him of fake results, and this and that...just because his derived creation from my Original Idea was not better than my original related replication...then, no one did absolutely nada about this...And I am not talking about administrators this time, but referring to ALL Members actively participating here.

It is really disappointing and sad to see how this thread has deteriorated just because of an individual behavior. This should never happen in such a Scientific Forum like this.


I have a very useful "resolution" that I take every time I see my self or my work closer to the darkness because of the actions from others...it is simple...and I will write it in my Native Language where it really sounds as it means:

YO, CONVIERTO EL REVÉS EN VICTORIA

I would translate it in the best of my ability...

I, REVERT FAILURES INTO VICTORY

I have always used this "personal law"...and it has served me very well.

I have learn a lot while being part of this Forum for over two years...good and bad experiences...but all experiences after all.


Regards to All


Ufopolitics
__________________
 

Last edited by Ufopolitics; 05-12-2015 at 08:02 PM.
Reply With Quote
  #7616  
Old 05-12-2015, 08:01 PM
GChilders GChilders is offline
Senior Member
 
Join Date: Feb 2013
Posts: 176
eject Midaz

@All
I find Midaz to be extremely disruptive to the point of bullying those who oppose any of his positions. He has an agenda to discredit any and all who would interfere with the future sales of his a1mogen. This is his agenda in staying here. I have grown tired of his disruptive influence and although I believe in freedom of speech he is free to post his opinions on his own thread. He wants maximum exposure and so continues to visit this thread so he can hopefully cash in on the exposure he gets here. He has stated over and over again how knowledgeable he is, and how helpful he has been. I have watched his behavior since he started posting. He has been neither. He attacks any approach that demonstrates his a1mogen is inferior. He bullies even those who question his motives. Recently he has started a campaign to discredit my findings in the "Battle of the Windings" primarily because it demonstrates that although a viable option the an2 winding is still inferior to the an1. When I asked him what excuse he would come up with if the an2 proved to be inferior in the load test, he attacked me directly with comments about my methods. Insinuating that I have created science fiction in my findings. Then when I contracted the stomach flu he brought up the question of my mental stability. Enough is enough. We should be able to post our findings in a peaceful manner. He is a narcissistic ego maniac and has never added one valid test result to prove his points. He demands videos of side by side tests and has not provided a single shred of video evidence of side by side testing to prove his claims that the an2 is superior or inferior to the an1. I believe that all of the attacks come from his own insecure position which he has not proven to himself the superiority of the winding he has proposed. He is what I call a blowhard, someone who believes in his own line of bull**** and thinks that repeating the same line of bull**** over and over again will somehow make it true. But alas it is still as false as the first time he spoke it. Really quite sad to see someone so deluded.

Cheers

Garry
__________________
 
Reply With Quote
  #7617  
Old 05-12-2015, 08:08 PM
Iotayodi's Avatar
Iotayodi Iotayodi is offline
Senior Member
 
Join Date: Mar 2009
Location: Florida
Posts: 322
Your video just lowered your credibility. Your grasp of the English language is atrocious. Spelling is one thing but referring to a winding as if it were the "wind" blowing is mind boggling! As far as I can tell your just here for a pissing contest which lowers your credibility even more. The real test is to put a motor in service for a period of time anyway. There would have to be a significant rise in efficiency to be of any real use on a mass scale.
__________________
 
Reply With Quote
  #7618  
Old 05-12-2015, 08:19 PM
HuntingRoss HuntingRoss is offline
Senior Member
 
Join Date: Sep 2014
Posts: 271
Quote:
Originally Posted by Ufopolitics View Post
...just because his derived creation from my Original Idea was not better than my original related replication...then, no one did absolutely nada about this...And I am not talking about administrators this time, but referring to ALL Members actively participating here.
I too have suffered from a tongue lashing or two and found the exact same response from ALL.

Fact is, I need no one to defend my position. Standing alone is not uncomfortable so long as the ground you stand on is truth.

Garry acquitted himself with restraint and dignity and made Midaz look all the more foolish...in my eyes anyway.

Good Hunting

mark
__________________
 
Reply With Quote
  #7619  
Old 05-12-2015, 09:47 PM
onewsun onewsun is offline
Junior Member
 
Join Date: Apr 2013
Posts: 6
ufo presentation

sir, i have been following this thread for several years and find it quite enlightening--your deep understanding of the magnetic fields has been very helpful in teaching me to understanding the way to harness the ether--with that said i will tell you that when you get close to breaking through the matrix of disinformation the trolls come out! midaz is probably paid to come here and disrupt this thread. if admin will do nothing to defend you from the same forces that closed down tesla and many others then i must wonder why they are here. are we looking to free humanity from enslavement to bad science and big oil or are we just pretending to be for freedom--kinda of like the republican and democratic parties which in reality are just two arms of the same head/body--i vote for freedom not enslavement get rid of midaz on this thread and redirect his posts to his own thread so his "brilliance" will not be lost to history. sorry to go on so long but ufo is very close to breaking us out IMO and i want to continue the journey with him. have a great day--one with the sun- virginia
__________________
 
Reply With Quote
  #7620  
Old 05-12-2015, 10:07 PM
Midaztouch's Avatar
Midaztouch Midaztouch is offline
Silver Member
 
Join Date: Feb 2013
Location: Japan for 2yrs
Posts: 546
#1
Quote:
Quote:
Originally Posted by sampojo View Post



Hey Sam

The width of your brushes is very important for the critical angles! Are your brushes the same size as a commutator segment?



Follow me... If I were you, I would wind your motor with 3poles Singular Coils = A1MoGen!
Remember, I set the guideline for the A1MoGen = "Singular Coils are the same size as the magnet."

Keep it Clean and Green
Midaz
UFO

You have a serious mistake!

Don't push 4pole Singular Coils wind on Sam. Nooooooo!!!

* The image does not show the moment when coils disconnect. The bisector of the coils are past the bisector of the magnets.

FACTS:
1.) That will cause the amps to spike! = heat.
2.) the magnetic fields repel eachother = lower RPMs
3.) lower efficiency


Midaz

Fix the critical angles. Then show the IMPORTANT frames; connect & then disconnected... Halfway is misleading!
__________________
 

Last edited by Midaztouch; 05-12-2015 at 11:49 PM.
Reply With Quote
Reply

Tags
w4t, machines, electrodynamic, asymmetric

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

Choose your voluntary subscription

For one-time donations, please use the below button.


All times are GMT. The time now is 08:18 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers