Energetic Forum

Energetic Forum (http://www.energeticforum.com/)
-   Renewable Energy (http://www.energeticforum.com/renewable-energy/)
-   -   Open Source Project for Tesla/Jackson Wireless Transmission (http://www.energeticforum.com/renewable-energy/7909-open-source-project-tesla-jackson-wireless-transmission.html)

MonsieurM 04-26-2011 06:09 PM

Open Source Project for Tesla/Jackson Wireless Transmission
 
thought to create this thread dedicated to the Open Source Project for Tesla/Jackson Wireless Transmission since i could not find any mention of it in the forum.


OS:Tesla, Meyl, and Jackson's Wireless Aetheric Power Transmission - PESWiki :thumbsup:


http://i1206.photobucket.com/albums/...mitter_300.jpg

when i see the "ball antenna" it reminds me of this picture spherical helix[:

http://i1206.photobucket.com/albums/...eurM/LW428.jpg

Quote:

spherical helix, also called a luxodrome. It is a spiral curve on the surface of a sphere, which crosses all meridians of longitude at the same angle.
Rhumb line - Wikipedia, the free encyclopedia

could be an improvement to the set up...that is my litlle contribution...:rolleyes:

MonsieurM 04-29-2011 01:43 PM

Tesla Coils for Dummies

:wall:

Tehnoman 04-30-2011 10:21 AM

Hmm, Interesting links.

As I see, some has finally made some notable (in sense of documentation) progress in Meyl experiment replication. And It is fairly new. Will have to follow progress in that realm.

Maybe I finally manage to contribute to this experiment also, my MSc thesis is coming and it could be a good time to do a throughout scientific evaluation of this experiment. :)

MonsieurM 05-01-2011 10:24 AM

i have a suggestion to make on the set up, my logic goes as follows, the Tesla/jackson wireless transmission works on the principle of collecting aether, and the Rodin Coil may also be a concentrator of aether (The Rodin Coil Antenna won a U.S. military design contest as the most powerful antenna with the greatest pickup over the longest distance) , why not couple these two to multiply the effect of power transmission
;)

i know i have been using the walter russell photo on several threads (http://www.energeticforum.com/new-me...dic-table.html) because it has so many different applications.

the set up would be:

http://i1206.photobucket.com/albums/...smitter_20.jpg


plus a (vacuum optional) cube (non conductive probably...) enclosing the ball and the rodin coils in each corner of the cube like following picture:

http://i1206.photobucket.com/albums/...vortex_out.gif

this is from my last post on this thread to know about rodin coil and a new theory of E8 geometry:

http://www.energeticforum.com/140438-post40.html

http://i1206.photobucket.com/albums/...sell_style.gif

different set up not the best of perspective but you get the idea :D


http://i1206.photobucket.com/albums/...edronsvg-1.jpg

Or you could use a cone-shaped antenna instead of rodin coil just like Otto MOHR Detonator Ray

Quote:

The cone-shaped antenna on top gathers the sun’s magnetic force which has transformed inside the instrument to motivated vibratory currents. Otto MOHR Detonator Ray
I know i posted this in another thread (a better way to present the periodic table), but i think it is just as relevant to have it posted here too:

FYI:

Music and Geometry:
Standing Waves form Platonic Solids


Quote:

"In 3D standing waves, a structure, with all characteristics of a platonic solid, is formed for each standing wave mode. Within an atom, which is the building block of matter, the platonic solid is not formed by salt or known particles, but by electromagnetic waves in vacuum.

Both the students of Buckminster Fuller and his protege Dr. Hans Jenny devised clever experiments that showed how the Platonic Solids would form within a vibrating / pulsating 3D sphere.
http://i1206.photobucket.com/albums/...andingwave.jpg

link:

Vibrations, Harmonics, Resonance, Waves and Reality :cheers:

:D

MonsieurM 05-08-2011 10:40 PM

Quote:

Originally Posted by MonsieurM (Post 138540)
thought to create this thread dedicated to the Open Source Project for Tesla/Jackson Wireless Transmission since i could not find any mention of it in the forum.


OS:Tesla, Meyl, and Jackson's Wireless Aetheric Power Transmission - PESWiki :thumbsup:


http://i1206.photobucket.com/albums/...mitter_300.jpg

when i see the "ball antenna" it reminds me of this picture spherical helix[:

http://i1206.photobucket.com/albums/...eurM/LW428.jpg



Rhumb line - Wikipedia, the free encyclopedia

could be an improvement to the set up...that is my litlle contribution...:rolleyes:


found this research which actually proves that the shape i proposed does have special properties yeahhh :cheers:

Quote:

A helical antenna, consisting of a winding over a spherical surface, is proposed and investigated, both theoretically and experimentally. The winding is such that a constant spacing between turns is maintained. It is fed coaxially, with the inner conductor forming the helical winding and the outer conductor becoming the ground plane. Radiation characteristics of the proposed spherical helix are calculated, using the method of moments, and compared with the measured results. The results of this investigation indicate that radiation properties of the spherical helix are markedly different from those of the conventional cylindrical helix. Of particular interest is that, over a certain bandwidth, the proposed helix is capable of providing circular polarisation over a broad beamwidth. This property and its compact size make the spherical helix attractive to mobile radio communication systems with low channel capacity.
IEEE Xplore - Sign In


link to the pdf doc:
http://scholar.lib.vt.edu/theses/ava...cted/etdig.pdf

:thumbsup:

MonsieurM 05-11-2011 09:35 PM

found another research paper on spherical helix antenna :thumbsup:

The Input Impedance and the Antenna Gain of the
Spherical Helical Antenna

http://www.ece.nus.edu.sg/stfpage/el...ions/ap_01.pdf

http://i1206.photobucket.com/albums/...ricalhelix.jpg

also a 3d plugin to make a spherical helix (for those that have access to 3d printer: http://www.energeticforum.com/renewa...reference.html ;))

Regular Polygon: Plugin: Spherical Helix 1.0

MonsieurM 05-13-2011 01:02 PM

Why vacuum, you ask?:confused:

http://upload.wikimedia.org/wikipedi...mir_plates.svg

Casimir effect - Wikipedia, the free encyclopedia

:thumbsup:

also found new research on Optimization of Helical antennas (in vacuum)

http://www.alzacomm.com/downloads/He...Submission.pdf

MonsieurM 05-19-2011 03:06 PM

new info:

Quote:

The radiation properties of several electrically small, folded spherical helix antennas are presented. The primary variables considered in the design of these antennas are the number of helical turns and the number of helical arms. The principle design objectives are to achieve self resonance, a low quality factor (Q), and a practical radiation resistance for small values of ka. Designs are presented for ka less than 0.5, where the antennas are self resonant, exhibiting an efficiency in excess of 95%, a Q within 1.5 times the fundamental limit, and a radiation resistance near 50 Ω. The relationship between the number of helical turns, the number of helical arms, and achieving self resonance at low frequencies is discussed.


IEEE Xplore - Sign In

http://i1206.photobucket.com/albums/...calantenna.jpg

http://ohd2007.esisar.inpg.fr/ppt/INV3.pdf

has the same overall shape as the dome of tesla coil

http://www.reformation.org/tesla-coils.jpg

:thumbsup:

MonsieurM 05-25-2011 01:59 PM

side note: i posted this on different thread but it still holds true in this thread too:

Quote:

Originally Posted by MonsieurM (Post 141831)
I think that Tesla was the first to realize the Constructal properties of Nature and was able to use that in order to make a fractal antenna out of whatever he wished and to tap into the scalar waves as well. :thumbsup:

and also:

A better way to qualify nature as Fractal is the Constructal theory:

Quote:

The constructal law puts forth the idea that the generation of design (configuration, pattern, geometry) in nature is a physics phenomenon that unites all animate and inanimate systems, and that this phenomenon is covered by the Constructal Law stated by Adrian Bejan in 1996: "For a finite-size (flow) system to persist in time (to live), its configuration must evolve such that it provides easier access to the imposed currents that flow through it."
link:

Constructal theory - Wikipedia, the free encyclopedia

:suprise:


If you are interested in the subject of Fractal/Constructal properties of nature i would advise you to refer to my other post:

Quote:

http://www.energeticforum.com/renewa...collector.html

to give a little taste of it (from my latest posting):

From the article:

Quote:

This apparatus was connected up to one of Mr Rogers’ latest buried antennas --- a single rubber-covered, stranded copper cable, extending westward for a distance of 4,000 feet, so as to be in a plane with the high-power European radio stations. This cable is encased in iron pipe (gas pipe), each 20-foot section of which is insulated from the abutting sections by means of a rubber hose (garden hose) slipped over the pipe ends for a few inches. This is buried in a dirt trench about 3 feet deep, filled in with soil. The cable is insulated at the free end and is connected up as in Fig. 2. The rubber covered wire alone has been used in all sub-aqueous tests, and gives fine results when simply buried in the ground, the decay not being so rapid as probably would be imagined. This latest aerial in the iron pipes is a new development and experiments are still going on with it. It works wonderfully well. The 4,000 foot aerial here described is best suited to receiving radio lengths of 6,000 to 16,000 meters. For shorter wavelengths aerials of smaller dimensions are employed.

Doesn't it resemble the root of a tree:

Quote:

Tree roots possess an apical meristem (meristematic tissue found at the tip) that is protected by a root cap. The root cap sloughs off its oldest tissues to provide lubrication as the root is pushed through the soil. As the apical meristem grows, it cuts off new cells through cell division, and a zone of elongation is formed directly behind it. In this area, the new cells are enlarging and differentiating into specialized root tissue.

The rate of root growth is quite variable throughout a growing season. Roots usually begin to grow before the tree top does, although root growth is cyclic and responds to environmental changes such as soil depth, water supply, aeration, mineral supply, and temperature.
http://www.extension.iastate.edu/Pag...mages/root.gif

:cheers:

one more info:

Quote:

a single rubber-covered, stranded copper cable, extending westward for a distance of 4,000 feet,
the answer to that is as follows:

Fractal Antennas: A Novel Miniaturization
Technique for Wireless Communications


Quote:

Wireless applications, particularly with multiple
resonances, put new demands on antennas pertaining to size, gain,
efficiency, bandwidth, and more. One promising approach in this
regard is to use fractal geometries to find the best distribution of
currents within a volume to meet a particular design goal. In the
miniaturization of wire antennas it has been found that the
electromagnetic coupling between wire angles limits the reduction
of the resonant frequency with increasing wire length.
Recent
efforts by several researchers around the world to combine fractal
geometry with electromagnetic theory have led to an emergence of
new and innovative antenna designs. Unique properties of fractals
have been exploited to develop a new class of antenna-element
designs that are multi-band and compact in size and have been
shown to possess several highly desirable properties, including
multi-band performance, low sidelobe levels, and its ability to
develop rapid beamforming algorithms based on the recursive
nature of fractals. The purpose of this paper is to introduce the
concept of the fractals and to provide a study and implementation
of rapidly growing field of fractal antenna engineering including
recent developments. The simulated results for Koch fractal
antenna using AWAS and NEC are also provided.
your underground fractal/constructal antenna:

http://www.extension.iastate.edu/Pag...mages/root.gif

links:

http://www.academypublisher.com/ijrt...0205172176.pdf
ISUE - Tree Roots


:hug:

:cool:

MonsieurM 05-29-2011 10:52 AM

If that is ok, I would like to quote Tehnoman :notworthy: , he has posted an interesting set of information which could help finetune the experiment . :cool:

Quote:

Originally Posted by Tehnoman (Post 141753)
Hello all.

Has been a long time since I have started a new thread. But now I feel it is time again. The reason is because quite recently I restarted more intense search into K.Meyl experiment and possible explanations. During the search I stumbled across one site, which I was not aware before:
Andre Waser publications

The most interesting could be these:
Nikola Tesla Wireless systems
Nikola Tesla Radiation and Cosmic rays

In the first one there is also this reference to document [47] (which I have not been able to find anywhere, Andre himself hasn't responded to my e-mail message) about analysis of Meyl experiment. The conclusion seemed to be that it can be explained by present (conventional, call it as You wish) high frequency analysis.

His papers seem reasonable, I haven't found any reason to doubt them. Then maybe there is this thing that science has given the chance for Tesla technology, but it simple doesn't destroy our present knowledge about nature?

There is this thing to think about.

P.S. I do anticipate that his thread will die out due to lack of knowledge for most people about vectors and mathematics behind the descriptions.

link to thread:

http://www.energeticforum.com/renewa...esla-work.html

MonsieurM 05-29-2011 05:43 PM

For those that have already replicated the Tesla/Jackson Wireless Transmission, try grounding both antenna's in water(separately of course), or/and fill the balls with water along with the stem ...I'm almost sure that you will notice an improvement. :thumbsup:

Quote:

Experience is made before the law is formulated, both are related like cause an effect. Nicholas Tesla
:cool:


I found this document, which i think is authored by Nicolas Tesla, I have uploaded it, so as you can have access to it

Quote:

Quite different conditions exist in my system in which the electromagnetic waves or radiations are designedly minimized. the connection of one of, the terminals of the transmitting circuit to the ground having, itself, the effect of reducing the energy of these radiations to about one-half, Under observance of 'proper rules and artifices the distance is of little or no consequence, and by skillful application of the principle of "individualization," repeatedly referred to the messages may be rendered both non-interfering and non-interferable. This invention, which I have described in technical publications, attempts to imitate, in a very crude way, the nervous system in the human body.' Nicolas Tesla
a while back i wrote this in a post on fractal antenna:

Quote:

I think that Tesla was the first to realize the Constructal /fractal properties of Nature and was able to use that in order to make a fractal antenna out of whatever he wished and to tap into the scalar waves as well.
Frontiers | Fractals in the nervous system: conceptual implications for theoretical neuroscience | Frontiers in Fractal Physiology

Quote:

This essay is presented with two principal objectives in mind: first, to document the prevalence of fractals at all levels of the nervous system, giving credence to the notion of their functional relevance; and second, to draw attention to the as yet still unresolved issues of the detailed relationships among power-law scaling, self-similarity, and self-organized criticality. As regards criticality, I will document that it has become a pivotal reference point in Neurodynamics. Furthermore, I will emphasize the not yet fully appreciated significance of allometric control processes. For dynamic fractals, I will assemble reasons for attributing to them the capacity to adapt task execution to contextual changes across a range of scales. The final Section consists of general reflections on the implications of the reviewed data, and identifies what appear to be issues of fundamental importance for future research in the rapidly evolving topic of this review.
I'm glad this document confirms my theory :D
One thing he omitted to mention when he wrote, "This invention, which I have described in technical publications, attempts to imitate, in a very crude way, the nervous system in the human body" is the presence of water, which you should not forget is present in The human body at about 60% water in adult males and 55% in adult females. that 's one big coil don't you think?


WATER IN THE UNIVERSE

Quote:

Water appears to be one of the most abundant molecules in the Universe. It dominates the environment of the Earth and is a main constituent of numerous planets, moons and comets. On a far greater scale it possibly contributes to the so-called "missing mass" of the Universe and may initiate the birth of stars inside the giant molecular clouds. This paper gives a brief description of water and ice environments with an emphasis on their possible origin and subsequent development in the Solar System. Expanding the scope of hydrology to cover phenomena encountered on other celestial bodies is postulated and discussed.
Note: it may take some time before both water bodies start resonating in sync

The Paper:D

links


http://www.energeticforum.com/141831-post9.html

http://www.energeticforum.com/142326-post57.html

ps: I have emailed Mr Jackson :notworthy: , to try my proposed experiment (water grounding) :wall:

:thumbsup:

MonsieurM 05-30-2011 10:39 PM

I found this thread on Overunity Forum about Water coil, quite interesting for the tree antenna experiment

Water coil in magnetic generator

Quote:

Hi all,

Just found the link http://www.geocities.com/mj_17870/magneticinduc.htm
The site itself contains many ideas about water splitting, properties, etc., but mostly theoretical
Site root http://www.geocities.com/mj_17870/index.html

Now brief desctription of idea from first link.

1) The one suggests to make some kind of water solenoid "coil" - by replacing the regular wire coil with coil of thin plastic pipe filled with h2so4 (or other) electrolitic solution.

2) Place the permanent magnet on one axle with dc motor inside the coil and spin to generate emf in surrounding coil.

Here are the questions:

1) What about back-emf in such system ? Will it make any resistance for dc motor if we take some electricity from "generator" water coil (the coil contains regular metal electrodes on its endings of course). I think that there should be back-emf effect but I confused with water conductors

2) If the emf generated in this water coil - AC electrolysis should take place. How this electrolysis agrees with energy conservation law ? We have the H2 and O2 on exit along with AC electricity - but place some DC to spinning motor (which possible counterforced by back-emf.
Magnetic Induction of Water

Quote:

Supposedly any conductive material can be made into a generator in one of these ways. Now as I pointed out liquid conductors do have different properties than metal conductors, primarily in how they transmit a charge as I pointed out in the Experiment #1 paper. I can't find any information that would suggest that you COULDN'T use water as a generator if you followed the basic rules of building and operating such a generator. There are many possibilities along those lines which I plan
to deal with separately. In this posting I just wanted to look at generators in general....
... In thinking about this in relation to water I decided that it would be interesting to think about weather or not water, used as the coils in a generator, would work. We already know that the Hydrogen Bond in water is weakened by the proximity to an electromagnetic field and we know that water (with an electrolyte) acts as a conductor. The fact that it is a conductor satisfies the main requirement for induction of electric current and the weakening in the presence of an EMF would suggest that, as above, a charge could be inducted by proximity. With these two factors in favor of the idea of water as the coil in a generator would seem to indicate that it would be possible to construct a mechanism which would exploit this and cause an electric current to be generated.
template


let me share with u some info on water:

Quote:

Kirlian Photography of
water samples on photographic film©:
1 drop - tap water,
2 mountain water drop,
Teteven, Bulgaria,
3 drop - seawater,
Hammamet, Tunisia,
4 drop - karst and mineral water,
Zlatna Panega, Bulgaria,;
Dr. Ignatov©, Dipl.Eng. Yatsevich©, 2010
http://www.medicalbiophysics.dir.bg/...rlian_film.jpg

Quote:

"In the Kirlian effect, which is a high-frequency electric discharge in gas, the color of light depends only on gas. It does not depend on the electrodes. It is apparent that the color Kirlian aura carries biological information from the object itself. The observed phenomenon cannot be described and explained from the point of view of the modern physical notions for the color of the light of gas discharge. The fact that different colors are being observed, apparently confirms the opportunity for selective influence on the researched object. The methodic and the results of Dr. Ignat Ignatov are a novelty, because local energy states of the researched object are displayed depending on the colors in his electric aura. This, as a fact, presents new possibilities for the research and characterization of the qualities and properties in a biological and physical aspect of the object. New opportunities are found for the characterization of the biological properties of objects after a certain influence. Dr. Ignatov’s methodic for Color Kirlian spectral analysis can be defined. New notions for color vision are possible to be discovered. It is not clear whether the green color that we see is an averaged effect between the yellow and the blue color, or in some cases it corresponds to a wave length corresponding to the green color of the spectrum (Marinov, Ignatov, 2008)"
The Capacity for Unique Bioinfluence Is Where the Colors of the Kirlian Aura Are (Ignat Ignatov) - Scientific Research Center of Medical Biophysics (SRCMB)

the following website has a collection of links relating to vibrational water, going from the esoteric to the scientific (u pick whichever interests you).

Quote:

Vibrational water is a term we are using to encompass a broad range of concepts and technologies related to energetic water themes. Vibrational energy is an emerging field in medicine, physics, and agriculture. Thus, related terms include vibrational medicine, vibrational physics, and vibrational agriculture.

Perhaps you will notice that some of these practices deal with subtle energy (e.g., Reiki, sai sanjeevini), while others are grounded in mechanical-biological (e.g., flow forms, Effective Microorganisms). We take a liberal approach and include all of these practices and concepts under this large umbrella known as vibrational water.
Vibrational Water

Quote:

Vibrational Water:// Standard Chemistry and Physics; A Reference Point

Causes of Color: //Why is water blue? //Vibrations and visible spectrum
Home | Causes of Color

Causes of Color: //Home
Home | Causes of Color

Double-Resonance Spectroscopy of Autoionizing States of Water
Double-resonance spectroscopy of autoionizing states of water

Dense Water
Peter Augustin
http://www.dichtes-wasser.de/eng/sta...e_englisch.htm

A fascinating series of articles on properties of water from Peter Augustin. The material probably lies somewhere between metaphysics and standard physics; very interesting!
Selected titles:

The Anomalies of Water – The Foundation of Life
http://www.dichtes-wasser.de/eng/The...s_of_Water.htm

The Muscles in Water
http://www.dichtes-wasser.de/eng/mem...t_englisch.htm

The Biological Vacuum
http://www.dichtes-wasser.de/eng/the...cal_vacuum.htm

Biological life is above all invisible, contractile, vibrating, reflecting muscle
membrane in water.

At the Beginning was the Sound. The Earthworm or The inner Infinity
Peter Augustin
http://www.dichtes-wasser.de/eng/at_..._the_sound.htm
water is present everywhere

Note:The human body is about 60% water in adult males and 55% in adult females.

Quote:

Water appears to be one of the most abundant molecules in the Universe. It dominates the environment of the Earth and is a main constituent of numerous planets, moons and comets. On a far greater scale it possibly contributes to the so-called "missing mass" of the Universe and may initiate the birth of stars inside the giant molecular clouds. This paper gives a brief description of water and ice environments with an emphasis on their possible origin and subsequent development in the Solar System. Expanding the scope of hydrology to cover phenomena encountered on other celestial bodies is postulated and discussed.
WATER IN THE UNIVERSE

The Paper

Water on the Sun?

Quote:

An international team of scientists, including a University of Waterloo chemistry professor, has conclusively demonstrated that water (actually steam) does exist on the sun, confirming a breakthrough finding made two years ago.

The team used an innovative method to calculate the water spectrum at sunspot temperatures. The method will be useful in modelling systems with an abundance of extremely hot water molecules, such as forest fires.
Water Found on Sun

note: meet your coil/fractal antenna to harvest sun energy

Cheers

MonsieurM 06-01-2011 10:48 AM

I was just reading through this thread:

http://www.energeticforum.com/renewa...variation.html

and i also read the info on pesn:

Dr. Steven E. Jones' circuit gives evidence for 8x overunity

Quote:

Retired Physics Professor, Steven E. Jones is working on a simple overunity circuit that he has seen go as high as 20 times overunity; documented on a state-of-the-art Tektronix 3032 oscilloscope at Brigham Young University producing eight times as much energy as was required to run the solid state circuit. One of his friends, Les Kraut, has replicated the circuit and also achieved eight times overunity...
..."I don't know where the energy is coming from, but it's coming from somewhere," he said.
I would like you to check out the following link, it a "google map" of Brigham Young University (marker B)...

http://i1206.photobucket.com/albums/...ieurM/utah.jpg


...Indeed the Great Salt Lake is close by (here is your large coil)

ps: I posted this on another thread because this knowledge discovery leads to so many different roads just like a tree ( good thing since there is also a fractal logic to it :cool: )

I got an answer why we should be using a water coil, before remember this fact (i ll explain why later):

water is present everywhere

Quote:

Water appears to be one of the most abundant molecules in the Universe. It dominates the environment of the Earth and is a main constituent of numerous planets, moons and comets. On a far greater scale it possibly contributes to the so-called "missing mass" of the Universe and may initiate the birth of stars inside the giant molecular clouds. This paper gives a brief description of water and ice environments with an emphasis on their possible origin and subsequent development in the Solar System. Expanding the scope of hydrology to cover phenomena encountered on other celestial bodies is postulated and discussed.
WATER IN THE UNIVERSE

The Paper

Now I present with:

WiTricity - Wikipedia, the free encyclopedia

Quote:

WiTricity is based on strong coupling between electromagnetic resonant objects (ie two water coil) to transfer energy wirelessly between them. This differs from other methods like simple induction, microwaves, or air ionization. The system consists of transmitters and receivers ( a tree for instance) that contain magnetic loop antennas critically tuned to the same frequency. Due to operating in the electromagnetic near field, the receiving devices must be no more than about a quarter wavelength from the transmitter (which is a few meters at the frequency used by the example system). In their first paper, the group also simulated GHz dielectric resonators...
...In the experiment both coils were made to resonate at 10Mhz, allowing them to couple and for "tails" of energy to flow between them.

doesn't this remind you of Witricity:

http://www.rexresearch.com/montagnier/abstr5.jpg


http://www.kempelektroniks.com/Site_...6628f81d78.jpg

then i guess a better version of what i proposed in post#4,(http://www.energeticforum.com/139017-post4.html ),

is filling the spherical helix with water, grounding both antenna's in water(separately of course), or/and fill with water the stem


http://i1206.photobucket.com/albums/...ricalhelix.jpg

http://www.loohan.com/2aik.jpg

more on this:

coil info

:thumbsup:

lamare 06-01-2011 02:12 PM

One of the best sources on Wireless Transmission is Eric Dollard's theory of wireless power:
http://www.tuks.nl/pdf/Eric_Dollard_...%20Dollard.pdf

I am currently working on dititizing this doc:
Tuks Energetic Wiki : Theory Of Wireless Power

More by Dollard:
Directory contents of /pdf/Eric_Dollard_Document_Collection/
Tuks Energetic Wiki : Energetic Form Posts

Also see this thread: http://www.energeticforum.com/renewa...-theories.html

MonsieurM 06-01-2011 02:26 PM

Thanks always good to see someone add one more branch to this project :thumbsup:

Check out my last post on this thread:

http://www.energeticforum.com/142622-post65.html


The Mystery Of Water ( 60 min doc)

YouTube - ‪1 The Mystery Of Water.‬‏

Farmhand 06-06-2011 10:24 AM

Hi Guy's, I was distracted when thinking of tree's, and started playing with coils and ended up looking at transmitting power.

So after reveiwing Tesla's Transmission patent here.
NIKOLA TESLA - Google Patents

And his Ignition coil patent here.
NIKOLA TESL-A - Google Patents

I came up with this circuit to do the pulsing, a mosfet switch with good gate driver and good PWM should be able to get to 200 Khz or more. The two self induction coils are four (two was easier to draw) on one form and it has a removeable core I can get from 40mH to 170mH.
http://wv0v9q.bay.livefilestore.com/...ver.JPG?psid=1

Seems to me this might work. Tesla's system is basically a ground connected logitudinal wave "exciter" for want of a better word. :D

I drew the spiral going all the way to the center but I intend to leave a hole so I can place another single layer cylindrical coil through the center, Maybe.

Cheers

MonsieurM 06-06-2011 11:39 AM

Awesome News Farmhand, could you try it connected to salt water or river water for a first test...I leave you with the technical details :embarrassed:

:notworthy:

Farmhand 06-06-2011 11:43 AM

I plan to leave a space in the center of the transmission coil so things can be inserted into it. :D

Like this. Don't know why yet though.
http://wv0v9q.bay.livefilestore.com/...001.JPG?psid=1

Cheers

MonsieurM 06-06-2011 11:51 AM

from the thread on water coil: maybe this should be in the center:

by Justin CHRISTOFLEAU


http://www.rexresearch.com/christofleau/fr812689a.jpg

Quote:

. I, a general view of this apparatus. . 2, a view of the apparatus in the shape of nonclosed, ready circle to receive at the center, the living organisms which one wishes to increase vitality.

In these figures the same letters of references indicate the same portions always.

This apparatus is composed of a tube A, formed by a steel wire rolled up in spiral.

Inside the formed tube by these turns, is past a copper B wire, insulated over all its length, only stripped with the two ends in order to be in contact with each of the two ends of steel tube A where it is attached, thus forming a closed circuit. In this steel tube A is also locked up a wire of soft iron C, also insulated over all its length, except at the two ends.

The operation of the apparatus is the following one:

The electricity of the atmosphere is attracted by the whole of the apparatus which forms magnetic mass and its power is increased by its passage in the steel A wire rolled up in spiral, which becomes for this cause a sensor and an amplifier of the electromagnetic forces, atmospheric electricity....
....The forms, dimensions, details and metals employed in the composition of the apparatus, can vary without changing into anything the object of the invention.

if you notice the spirally shape (which simulates the shape of a tree)
Justin CHRISTOFLEAU -- Electroculture book & patents

Farmhand 06-06-2011 11:53 AM

Quote:

Originally Posted by MonsieurM (Post 143216)
Awesome News Farmhand, could you try it connected to salt water or river water for a first test...I leave you with the technical details :embarrassed:

:notworthy:

You mean the ground connection ? Like in a drum or something, metal or plastic ? A stailess or aluminium vessel with salt water sounds good it would still be connected to ground also.

Yeah ok not sure how long it will take me to wind all the coils though. And I will need to build a circuit controller when my Mosfet driver's and stuff arrive's. For smaller coils higher frequency might be needed. Too high of a frequency make's the energy hard to recover to a usable form or store.

I think connecting the primary to the secondary is only needed in high power setups for safety. It does waste some power, a small amount at that but a bit.

I have an idea for a voltage step up on the primary using a regular inverter type circuit. But they are only idea's.

Thank's for the inspiration. :thumbsup:

Cheers

MonsieurM 06-06-2011 11:56 AM

As a great scientist said:

Quote:

You MUST keep an open mind and use these methods as those successful have already used them to achieve success. Who are you willing to believe, those who have not succeeded or those who have?
Dr. Alexander Graham Bell
:D

MonsieurM 06-06-2011 12:04 PM

You may want to read on:

James H. ROGERS

James H. Rogers: Underground & Underwater Radio Antenna



Quote:

Top photo [Photos not shown here: poor quality photocopy] shows antenna wires being placed in river by Mr Rogers’ assistants. The inventor has found that his system works just as well under water as through the earth. All of the high power stations in the world, from Nauen and Lyons to Honolulu, are heard in Mr Rogers’ laboratory at Hyattsville, MD, shown in the center and lower views herewith. The author of this article also heard the transatlantic stations coming in loud and clear. Mr Rogers invention is the greatest in the war and is so recognized by the government.
Quote:

Now comes along Mr Jones with his new invention, showing us how to use a concentrated underground aerial that all of s can use in every city without any trouble whatsoever.
...One sleepless night visions began to parade before my half-conscious vision and amongst the crowd was a coil of wire rolling merrily along --- Ah! The problem was solved…

In the morning I went forth with vim and vigor to plant some coils in old Mother Earth. Finding labor scarce decided to throw them into the lake for a trial. Ouch! Then the fun began. Now to get back to business we will begin with the first experiment carried out at this lake, in order to prove my sanity.
Quote:

Experiments were carried out with large square framed coils ( 200 feet to the turn, or 50 to each side of the square ) laid on the ground. This was tried for long wave undamped reception and exceptional results were had when the ground was wet, immediately after a good rain, for then the wires were practically buried. However, when the ground dried out, the signals vanished and were not received with a readable audibility. It was only necessary to have these coils buried in moist earth and excellent results have been obtained. Receiving on underground from short wavelengths with long outstretched wires demands a critical length of the wire. However on a loop or concentrated open ended coil such as mine, the length does not materially affect such reception until the length exceeds 500 feet to the coil.
And

This is a beauty, once again rexresearch never lets me down :thumbsup:

Gordon WADLE (help you with voltage info)

Tree Electricity


Quote:

[0005] A method for drawing electricity from a non-animal organism, the method including coupling a first electrical conductor to the non-animal organism, coupling a second electrical conductor to a ground rod, embedding the ground rod into soil at a predetermined depth as a function of a desired current level, whereby the current available from the non-animal organism is increased by increasing the depth that the ground rod is embedded into the soil, coupling an electrical load between the first electrical conductor and the second electrical conductor, the electrical load being configured to draw electricity from the non-animal organism via the first electrical conductor, and operating the electrical load using electricity drawn from the non-animal organism.

[0006] In general, in another aspect, the invention provides a system including a non-animal organism, a first electrical conductor electrically coupled to the non-animal organism, a plurality of ground rods embedded into soil wherein a quantity of the plurality of ground rods is a function of a desired current level from the non-animal organism, whereby the current available from the non-animal organism is increased by increasing the quantity of the plurality of ground rods, a second electrical conductor coupled to the plurality of ground rods, and an electrical load coupled between the first electrical conductor and the second electrical conductor to draw electricity from the non-animal organism, the electrical load using electricity drawn from the non-animal organism.....
....[0067] Referring to Appendix A, exemplary results of voltage yield tests from different trees using different tap configurations, different ground rod quantities, and different numbers of taps are shown. The tests were performed using the configuration shown in FIG. 1, and described in the corresponding written description, where the load was a voltmeter.....
.... POWER SOURCE
DATA COLLECTION Height
Test Time Voltage Nail Penetration Nail from No. of
No. Intervals DC Tree Type Nail Type Depth Diameter Ground Nails Soil Type Altitude

1 7:00 PM 0.9 VDC PINE STAINLESS [3/4]'' [1/8]'' 3 FT 2 LOAM
2 7:25 0.9 VDC PINE STAINLESS [3/4]'' [1/8]'' 4 FT 2 LOAM
3 7:40 0.9 VDC PINE STAINLESS [3/4]'' [1/8]'' 5 FT 2 LOAM
1 1:00 PM 1.0 VDC PINE STAINLESS [3/4]'' [1/8]'' 5 FT 2 CLAY-SAND
Gordon WADLE : Tree Electricity, Voltree Bioharvester


notice the common link...:cool:

What if your aerial antenna was the tree, and the ground antenna the water in the dam?...

hope this helps :thumbsup:

cody 06-06-2011 12:50 PM

Farmhand,

If you are replicating the little setup that was posted in this thread then you will need higher than 200KHz, those little coils are running in the MHz. Im not sure why these guys are using the pancake coils as tesla himself switched over to a helical coils in his later designs. Also what i didnt find in the documents here on this jackson setup is the primary should be tuned to the secondary. If you use a series resonant circuit on the primary that will step the voltage up for you on the primary and also be more efficient. I have found with my setup that the more inductance the primary has and the less capacitance i use in the tank, the higher the voltage will rise on the primary. Adding the ball on top the secondary will significantly lower the resonant frequency of the secondary. This is good because the skin effect on your wire will loose a lot of power at high frequency.

MonsieurM 06-06-2011 01:12 PM

something like this:

http://www.rmcybernetics.com/images/main/tc.JPG

I would like to also point out that we all live under the same resonance, Schumann resonances

see following post:

http://www.energeticforum.com/136257-post20.html

Farmhand 06-06-2011 02:05 PM

Quote:

Originally Posted by cody (Post 143226)
Farmhand,

If you are replicating the little setup that was posted in this thread then you will need higher than 200KHz, those little coils are running in the MHz. Im not sure why these guys are using the pancake coils as tesla himself switched over to a helical coils in his later designs. Also what i didnt find in the documents here on this jackson setup is the primary should be tuned to the secondary. If you use a series resonant circuit on the primary that will step the voltage up for you on the primary and also be more efficient. I have found with my setup that the more inductance the primary has and the less capacitance i use in the tank, the higher the voltage will rise on the primary. Adding the ball on top the secondary will significantly lower the resonant frequency of the secondary. This is good because the skin effect on your wire will loose a lot of power at high frequency.

No I'm not replicating it. I'll just do what I think will work for me. I intend to try both helical and spiral transmission/receiver coil's. And some other thing's.
Including series inductor's/choke's like you say.

Driving the primary open ended into a capacitor or similar is a prospect too. I seem to have attained some kind of resonance with a dodgy test setup i'm playing with now. The capacitance at the open end of the primary seems to reflect the energy and if the frequency is tuned a sweetspot for the system can be found at very low frequency well under 10 Khz. But I admit it is not as easy as all that and I agree with your evaluation of the required tank circuit for maximum effect, but I'm not sure a helical coil will be better, I was thinking Conical Coils would be best. Maybe you are correct there too. I won't discount that at all. Thank's for the tips. :thumbsup:

Cheers

P.S. I have a video uploading.

Farmhand 06-06-2011 04:50 PM

I also just realised that with wireless transmission of power we may only be able to expect to receive with any one reiceiver station the same wattage as is input into the transmitter minus transmission losses.

For example if I put 1 ampere at 12 volts "12 watts" into the generator then each receiver station could only have access to 12 watts of power. And that may well be restricted to one receiver station. If two receiver stations were used I imagine to get 12 watts from each one then 24 watts would need to be put into the generator plus losses of course.

After all it is transmission of power not "broadcasting". If in fact multiple receivers can all draw 12 watts each from a 12 watt input at the transmitter then I would be suitably impressed. :eek:

I think the trick is getting free power to transmitt in the first place.

If multiple receivers could be used then we should be able to transmitt the power back to ourselve's to power the generator. :rofl: Oh my. :suprise:
Through a delay loop of course involving another transmitter and local receiver tuned to a different wave.

Back to square one. Hahaha I will proceed. First video upload failed when i lost my network connection for a while.

Cheers

Farmhand 06-06-2011 05:10 PM

Transmission Loops.
 
If infact multiple receivers could draw power at a multiple gain then a system like this could be used.

http://wv0v9q.bay.livefilestore.com/...001.JPG?psid=1

A transmission loop with two differntly tuned transmission/receiving circuits at each location and one generator for each location. After an initial priming and power transmission the loop could be established and only a small maintaining input would be required, this could be collected from a dedicated radiant energy collector like a solar array or something if necessary depending on if there is any actual base power gain, if so it would need to wasted out of the system somehow.

Cheers

MonsieurM 06-06-2011 07:57 PM

You have just Fractalized it or should I say constructilized it...:D


the constructal law says (applies for trees and water as well)

Quote:

The constructal law puts forth the idea that the generation of design (configuration, pattern, geometry) in nature is a physics phenomenon that unites all animate and inanimate systems, and that this phenomenon is covered by the Constructal Law stated by Adrian Bejan in 1996: "For a finite-size (flow) system to persist in time (to live), its configuration must evolve such that it provides easier access to the imposed currents that flow through it."
just repeat the G,T,R tryptic, only weaker and smaller :thumbsup:

http://www.nuts-about-needlepoint.co...rp-300x300.png

:notworthy:

MonsieurM 06-07-2011 12:21 AM

Just wanted to add one more think about using a helical antenna, stumbled on it while reading through LCR circuit:

Helical resonator


Quote:

A helical resonator is a passive electrical component that can be used as a filter. Physically, a helical resonator is a wire helix surrounded by a square or cylindrical conductive shield. Like cavity resonators, helical resonators can achieve Q factors in the 1000s. This is because at high frequencies, the skin effect results in most of the current flowing on the surface of the helix and shield. Plating the shield walls and helix with high conductivity materials increases the Q beyond that of bare copper.

The length of wire is one quarter of the wavelength of interest. The helix is space wound, the gap between turns is equal to diameter of the wire. Helical resonators are well suited to UHF frequencies ranging from 600 MHz to 1500 MHz.
RF Cafe - Helical Resonator Design for Filters Equations Formulas Charts Graphs

http://www.rfcafe.com/references/ele...Dimensions.gif

I refer you to post#4 :thumbsup:

excuse my ignorance but is it possible to have a small rlc circuit sitting on top of a large rlc?

what made me think of that is the pic i posted earlier:

http://www.nuts-about-needlepoint.co...rp-300x300.png

cody 06-07-2011 01:51 AM

Quote:

something like this:
Yea that will work too, but i wouldnt make the primary like that if your just driving it from a function gen. I like to use that type of secondary because its an easy and cheap way to get the coil down to a low enough frequency to still get away with using thin wire and you can get a lot of turns on it to ramp up the voltage nicely. But its still not ideal and not exactly what tesla was doing, he did however like to use those tall close wound secondarys for recieving coils during his testing. Here is his design:






http://upload.wikimedia.org/wikipedi...Tesla_Coil.png


This as Im sure most of you know was his last patented design for the transmitter. Some parts are not drawn properly to scale but this you get the idea. If you read through the colorado springs notes you will see the dimensions of the coils he was using.

http://homepages.ihug.com.au/~panopu.../teslaaii4.jpg



Here is the actual pic from colorado in which you are looking at the coils to scale from the diagram above. He is sitting by the secondary, and that thing in the background that looks like a fence is the bottom part of the secondary and the primary. Quite different from the usual tesla coils most build.


All times are GMT. The time now is 07:12 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved