Allen,
I am interested in the mechanism of the cells.
An introduction at a basic level may help as you had explained
that most of what you are familiar with is at post graduate level.
I find that a history of the development and the milestones
of accomplishment make an interesting reading and an appreciation for
where you are now and how it came about.

It is a good reminder that there are many research projects that are by invitation only and do not publish much on the web.

You had quoted Shakespeare about a pot calling the kettle black.
This to me suggests that scientists cannot see the similarity.
You have had an opportunity to read Bedini earth light and others here but we know very little about what you are referring to. It may take an effort to get up to speed on this.

I hope you are having a good vacation, paradise brings to mind Hawaii,
coconuts, hula dancers, roasting pig, scenic beaches and volcanoes ect.

Wave Particle.

@microvolt,

I thought I might need a new incarnation, but apparently I can continue to post under my current alias. Let me start wirh a broad scope:

We are on the shoulders of three theoretical giants: NicolaTesla, Werner Heisenberg, and Max Plank. all proponents of Unified Field theory, linking Nuclear and Galactic physics. Wave over particle theory of light, Max Planck reduced everything to vibrations, which resulted in our current string theory. Plank assigned electromagnetic wave frequencies to the periodic table of elements. Basicly, some gigahertz crystal molecular vibration is at the same frequency as microwaves. This may help explain why some crystals spontainiously generate electric power. We have to imagine the atom as a wave field not a particle. Unified field theory views everyting as vibration, nothing more. This constitutes the first dimension of the 3-D microwave rectenna.

The Marcus Reid Sodium Silicate power cell exhibits spontainious generation of electric power. I believe it is at least a two dimensional microwave rectenna, possibly three. John Hutchison has demonstrated how high frequency EMF can turn steel into a flimsy vaporous mirage. Both examples support the wave theory of matter.

hutchison effect - YouTube

3-D photonic lattice.

@mikrovolt,

The description of the picture of the 3-D full microwave band photonic receiver below is somewhat misleading. First of all, it has nothing to do with photons, hence my use of COSMOTONIC to be more precise, because it's receiving and rectifying microwave energy not sunlight in 3 dimensions: Molecular, Structural and Body Form. John Bedini wouldn't allow me to tie this together on his "Earthlight" Thread due to some kind of inferiority complex.

A 3-D Cosmotonic cell could be constructed by mixing the correct ratio of Sodium Silica grains to Elmers glue to create a strucual lattice spaceing on the 2nd Microwave band harmonic, and an electrode plate on the 1/4 wave ratio of 6cm X 3cm size, or scaled up in size by a factor of 2 for the third dimension Body Form reciever.

I believe that the first Marcus Reid power cell was a two or three dimensional cosmotonic microwave rectenna, squat in wave ratio shape coupled with a slica lattice compound mixture on the second dimension wave harmonic. Take special note of the 2 X 1 outside form characteristic in the attached picture.

I first garnered these facts from the Rex Research Lab site article on the Marcus Reid Power Cell. The page has subsequently been taken down. The Rex Research article was most likley redacted from journal articles from Marcus still on file in our library system. Books in print and our periodicals in print archives probably contain detailed direct sourse material references from 2006 when he first published his test results. Nevertheless, a third dimension reciever-form should increase the Power Cell's output. The power gained from Third Harmonic Wave Resonance would far exceed that captured by a third level reciever configuration alone. Non acceptance of the microwave theory would render the shape inconsequential. Tests are needed to confirm the Hypothisis.

Could a forum group make a successful cosmotonic cell ?

What materials would be needed ?

Thankyou for your reply!

@microvolt,

I believe it's possible. A tiny bed of lubricated pins of the correct dimensions and spacing for a mold of liquid Sodium Silicate compound, perhaps combined with Epsom Salts, in wave fractal proportion. Coupled with tailored disimilar electrode plates, a 4-D Rectenna Power Cell might be possible. The four dimensions: Molecular, compound fractal mix, Egg crate lattice and wave proportioned exterior electrodes and body form. Not full spectrum, but interdimensionaly sympathetic scaler resonant. Comparable to a HOLOGRAM. All the dimensions can be factored from the wave length figures in the JLN attachment. Proportions based on halving fractions of the 2.45 GHZ microwave band length. I have learned from experience that it helps to have a plan before you start an experiment. I am seeking input.

Allen, having wondered about a lattice of cells within a containing structure for a while, i'm happy to see the furtherment of such ideas within your embodiment.
A rather simple piece of test equipment would appear to link in readily.
If we are to create cells to be tested with microwave frequencies, then a source of the correct frequency would be needed, from which data obtained would ascertain the functionality of the tested cell.
A simple R/C transmitter is my thought !
Being as radio controlled aircraft are a hobby interest, I also have a couple of 2.4GHz transmitters.....is such an idea way off the mark ?

Microwave broadcast signal.

@Slider2732,

That's a fantastic idea! We measured amperage from a piece of magnet wire hanging out of a closed microwave oven door for a few seconds before it fried. There's a videotape of that over on the Ismael Aviso thread. I don't know how long a test cell would hold up in an oven. Your idea is at least a million times better. Aviso is a microwave engineer and is reportedly collecting and rectifying microwave power along with a full spectrum of radio frequency power with some sort of wire coil antenna to run a car. Maybe we'll hear from Ishmael. That simple oven test was to see if magnet wire could pull it in. Thanks for the put together! I'll try and dig up that video just for laughs.

2.45 R.c.

@Slider2732,

First; Can you describe the microwave R.C. reciever crystal in the model aircraft?

Second; would you be willing to point the R.C. broadcast control at a simple two electrode crystal glue power cell with a multimeter attached, to see if increased output appears? This simple experiment would make a watermark video, and expose JB's necromancer alchemy.

Here's a picture of a pair of Ishmael Aviso's full spectrum M.E.G reciever coils. The crystal cores are clearly visable, although they appear recessed and wraped with conductor foil. Aviso calls this a "cascading" reciever, perhaps better understood as "multi dimensional harmonicly resonant". (X)-D full spectrum? Looks like this may be the end of the line. It may be possible to refine his crystal core to increase dimensionality, but it's already powering 100 watt incandescant bulbs.

A souped up Zenmensional Macrospectrum, nano terraced lentil shaped personal spacecraft energy reciever form may help beat the Chinese to Moon noodles!

Microwave test.

Here's the by proxy Warped Factor video "Altrez" uploaded after a few beers from the Ishmael Aviso thread. This proves the "Ground Scouring" theory of negistor charging. The magnet wire is attached to the NEGATIVE POLE of the battery.

9vtest good - YouTube

The point is, Ishmael Aviso is useing currentless high voltage alone from his reciever to pull a positive charge into his lead acid batteries from Earth's background EMF. On further reflection I believe Ishmael Aviso's microwave crystal reciever core is flat, not a 2-D current generating lattice compound like Marcus Reid's crystal power cell.
We can fish for the correct harmonic sand mix with Slider2732's 2.45 ghz remote control. I will calculate and shop for the correct size sand grain.

Grain size.

The grain size should be a halving of 12.2 cm or 4.80314 inches, the wave length of a microwave. An f.M. radio antenna of 22 inches recieves an RF wave city blocks in length. Grains are seperated and collected with sieves. I attached a chart. The range of grain size should offer a group of candidates to experiment with. 190 mm, the 6th division, places sand in the fine range. An easy grit to locate in the market place. The link below offers a 5 pound bag of fine white sand for $3.49. All that remains to do is to fish for the correct sand to silica ratio with the microwave remote by trial and error. A 50/50 mix by weight should be a good target proportion to start. The silica filled space between the sand grains needs to the same dimension as the sand grains, 190 mm. The silica atom's electron orbits a wave fractal too. This combination should generate current from 2-D scaler resonance.

Naturally, this mixture needs to fill an aluminum pipe with a copper tube in the center. The whole Power Cell should then be dipped in hot wax, to seal it and prevent hydration. John Bedini's Sodium Silicate Cell pulled water in from the surrounding atmospheric humidity and turned it to mush. It would help to drill a hole in the side of the aluminum pipe for one electrode screw, and allow the copper tube to extend past the pipe lip for the other.

Discount School Supply - Fine White Sand

Ground scouring witrh crystal voltage.

Ibepointless2 generated zero amperage, 600 steady millivolts with his pure completely dessicated Sodium Silicate Cell. Regardless of where or how this spontainious charge appears, might it be possible to use this voltage alone to gain the kind of ground scouring charge "Altrez" demonstrates in his microwave video? Ibepointless2's test cell is not a capacitor, but continues to generate voltage when shorted back upon itself. No amount of use can deplete it. Might it be possible to pulse a negative battery pole with the kind of Crystal Cell Garden Wire Oscillator Lidmotor uses to power LED'S with? Aviso earned a COP certification of 133% from the Phillipine DOE for his car. His crystal microwave rectenna collects enough power to charge lead acid batteries this way. A superior approach to any of John Bedini's power consuming radient charger systems.

Allen:
I don't know if this has anything to do with what you are bringing up, but my aluminum capacitor cans are filled with washed beach sand and cement, and they have a thick inverted copper spiral inside. They are now over a year old and still producing voltage.
I'm not sure I understand what you are trying to do with making the type cell that you mentioned, but I though that the idea was somewhat close to what I have done with my cells.
I am not into experimenting with galvanic based wet cells, as I know that will not work, for long.
The pyramid project was also depending on a "reactor" made using copper tubes filled with quartz sand and polarized by HV.
There may also be more than just microwaves to tap energy from, as the Aether contains All frequencies.
NickZ

@Nickz,

It's not possible for any current to come through the magnet wire from the microwave oven in the "Altrez" video. He didn't measure the voltage, but it was probably in the gigavolt range. Your cell is a perfect platform to test the theory. You need to multipy the voltage to it's very highest level to generate a "Groud Scouring" charge in a battery.

You need to snap it! Tesla's very first patent was for his Hi-Voltage Spark Gap Generator. Tesla's invention just fires an ambient capacitor charge accross a spark gap, and generates a maximum voltage that sends a wave through outer space with a power factor close to infinity. This was the first radio broadcast signal, and could be detected any where in the Galaxy by recievers. This currentless voltage is what's needed to generate a battery charge through the negative pole. Any amperage at all results in a virtual a short in the battery, and generates unwanted waste heat and battery damage.

Since your starting with a power cell, there's no wasted charge time, so you can connect a "Lidmotor" style oscillator to act as your high voltage power plant. An antenna attached to the positive pole of the battery would improve the charge rate. Try a 9 volt rechargable Ni-Cad.

I've followed your progress on the forum with keen intrest and don't doubt you're collecting energy from a broad spectum. Townsand Brown polarized a mixture of Tungston Carbide powder and melted Carranuba wax with Hi-Voltage while it was cooling to make his Cosmotonic power cell. Something your probably well aware of. John Bedini's latest gift formula is a hybridized cosmo-galvanic power cell. The system I'm proposing, a spinoff from the Crystal Lattice Cell, I have classed as serial cosmo-galvanic. This kind of setup with two power cells, one like yours to run the oscillator, and a pure silica one like Ibepointless2's to supply the currentless scrub voltage. This system should never run down, and should supply enough power to run a Stiffler Exciter perpetually.

Radiant chargers.

I reurned home from holiday to find my 12 volt lead acid battery dead from lack of use sulfation. I traded it in for a new one at the repair shop. I told the mechanic I could restore it with a pulse charger and he replied; "That's a piece of crap. It burns the batteries out"! I tried to argue with him but he assured me they just got through taking a few to the dumps. Why?

The spark gap transforms 100% of the current to high voltage. A transistor leaves residual amperage in the pulse because it can't generate a pure square wave. Running any amount of amperage into the ground creates a virtual short and burns the battery up. Starting with pure voltage from a Crystal Reciever Cell would possibly eliminate the need for a spark gap, and would also eliminate the left over virtual short amperage from a transistor. Pure Crystal Cell ground scouring voltage might not need to be extremely high if it can be steadily applied without killing the battery. An Avmarenko plug would need to connect to the Lidmotor oscillator where the LED'S are, and the single wire to the negative ground of the galvanic charge battery.

A transister connected between the LED leads, would be able to pulse a Hi-Voltage series stack of pure voltage bottle cap size Sodium Silicate cells through an Avmarenko plug to the negative galvanic charge battery ground.