Announcement

Collapse
No announcement yet.

Bedini RPX Sideband Generators

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stephen Brown
    replied
    RPX TESTIMONIAL REQUEST AND CHALLENGE

    I’m thinking this is the right place to post RPX testimonials.
    I know there are a lot of you out there who own and use this device.

    I know John Bedini was very passionate about finishing this technology during his lifetime.
    I also know that one of the things that motivated him was the death by cancer of his mother who he felt could have benefitted greatly if she would have had access to an RPX type device.
    In memory of John Bedini and the legacy of amazing devices he created during his lifetime. And since Aaron can’t post any anecdotes he has heard that tell actual stories of how wonderful the RPX device acts to heal the human body.

    I would like to challenges all owners of this device to tell their stories here for the good of all.


    I’ll start with mine:

    I have had my RPX for more than two years.
    In that time I have used it to reduce and minimize my outbreaks of herpes simplex. Occasionally sunlight and stress cause me to get cold sores.
    The RPX has reduced the duration of these outbreaks substantially.
    They used to take a week to build the lesion and two to three weeks to resolve.
    At the first sign of the outbreak I begin using the machine.
    Zoster is very difficult to get rid of, but I believe that my immune system is dealing with this pathogen better with every passing treatment.


    I recently delivered the RPX to my brother in law who had been suffering from fever, cold sweats and nausea and had no appetite for three weeks on and off.
    His symptoms had come and gone two times and had returned so strongly that his wife was afraid he would soon have to be hospitalized.
    He knew nothing about the workings or history of the machine when I delivered it to him.
    After using the machine once, he slept soundly through the night and woke up feeling much better, his appetite and energy had returned.
    He continued to improve very quickly and has now completely recovered.

    My wife’s first experience with the RPX sold her completely.
    She had a cough and headache which had been plaguing her for two days.
    She sat down with the machine for 15 minutes and arose from the treatment symptom free.
    She told me it felt like magic.

    My stories aren’t offered as anything but anecdotes. I don’t have any oncologist reports of miraculous healings. But my stories are proof enough for me.
    And I will certainly continue to use this wonderful machine.

    I have heard stories from many others that own an RPX of truly remarkable healings.
    I would like to hear your stories. Please share if you would.
    I believe frequency medicine is the future healing.
    Thank you John and Aaron for your work to make the RPX more broadly available to the public.
    Toward love and health.
    Stephen




    Leave a comment:


  • Aaron
    replied
    marathonman banned

    Originally posted by marathonman
    At no time did Rife use a few watts of low power. even in the video of him using his machine did he not use low power. his bulbs he used would not even light with the power you are talking about let alone kick a virus butt.
    I laugh at the gullibility of people as his video's of him using his machine says the RPX won't work. not enough power.
    Marathonman is here for disinformation and will be banned. His attitude, mouth and lies are simply not going to be tolerated. There are no more chances for trolls.

    You obviously haven't the slightest clue as to what the technology is or how it works. You're a parrot chirping away what you think you know based on what you think you comprehended of what you've read.

    You're ignorant of the fact that almost all the power going into a tube setup is lost in the plasma creating heat. Only a fraction of that is transmitted RF.

    After the LOW FREQUENCY carrier is explained AFTER it is shown to him on the scope, he continues the deception that low power is ineffective without understanding how it works.

    Leave a comment:


  • Aaron
    replied
    low frequency pumpwave

    Originally posted by marathonman View Post
    Yes, i do understand it and have collected all i can and i am telling you the output needs to be hooked up to an amp.
    there is no 8 hz wave and no the others are not carried on it.

    the audio wave modulated the 3.1, 3.3 or 3.8 carrier wave that caused upper and lower side bands.

    Rife machine's output 75 watts and was left there.

    audio signals can barely penetrate the skin let alone the cells that is why the high frequency carrier wave is necessary .

    read the part on skin penetration and you will understand.

    if you watch Bedini's video you will see a MOPA RF Amp he designed and used not the RPX because it has to little output to do anything.

    the number 5 Rife was designed by Hoiland to hide the original frequencies put out 75 watts RMS and 150 peak.
    MM
    You are incorrect.

    https://youtu.be/tsuwfGja1m4?t=17m45s

    It is all carried on a 8 cycle per second square wave and is why low power is all that is needed. You are misinformed.

    John shows and explains it in no uncertain terms here: Bedini RPX - Book & DVD Set

    Leave a comment:


  • marathonman
    replied
    Rpx

    Yes, i do understand it and have collected all i can and i am telling you the output needs to be hooked up to an amp.
    there is no 8 hz wave and no the others are not carried on it.

    the audio wave modulated the 3.1, 3.3 or 3.8 carrier wave that caused upper and lower side bands.

    Rife machine's output 75 watts and was left there.

    audio signals can barely penetrate the skin let alone the cells that is why the high frequency carrier wave is necessary .

    read the part on skin penetration and you will understand.

    if you watch Bedini's video you will see a MOPA RF Amp he designed and used not the RPX because it has to little output to do anything.

    the number 5 Rife was designed by Hoiland to hide the original frequencies put out 75 watts RMS and 150 peak.
    MM

    Leave a comment:


  • mightyeye
    replied
    pumpwave

    Originally posted by marathonman View Post
    While i do agree with the RPX system and it does seam to do it's intended job of what Rife did as i have been researching it for quite some time now i have to say without an MOPA RF amplifier this system is totally useless. it is completely impossible at these extremely low voltages to get any results what so ever.
    Rife's original system output just the main MOR freguency that was so intense it could be detected for 8 miles. since the FCC shut him down he had to come up with a better idea.

    advanced to #5 he used a carrier wave and modulated it with an audio signal. why, because the audio frequencies with out an RF carrier will not enter the body past the skin. he sure didn't use .5 watts of energy he used 50 to 100 watts of energy.

    so again i have to say the RPX system without an MOPA RF amp is useless in it's self but matting it with an MOPA RF amp will get you to the point where you want to be.

    MM
    I haven't been here in a very long time!

    I've been researching this behind the scenes for a very long time. You're not understanding what the RPX is. There is a very low frequency square wave around 8 cps that the 3.1mhz and sidebands are carried on and that square wave is what delivers it. That isn't theoretical - that is exactly how it works and is why it can work at such low power. Bedini is a GENIUS. Watch his books and videos on the subject at least and then you'll understand it. That causes the "pump wave."

    Leave a comment:


  • marathonman
    replied
    RPX System

    While i do agree with the RPX system and it does seam to do it's intended job of what Rife did as i have been researching it for quite some time now i have to say without an MOPA RF amplifier this system is totally useless. it is completely impossible at these extremely low voltages to get any results what so ever.
    Rife's original system output just the main MOR freguency that was so intense it could be detected for 8 miles. since the FCC shut him down he had to come up with a better idea.

    advanced to #5 he used a carrier wave and modulated it with an audio signal. why, because the audio frequencies with out an RF carrier will not enter the body past the skin. he sure didn't use .5 watts of energy he used 50 to 100 watts of energy.

    so again i have to say the RPX system without an MOPA RF amp is useless in it's self but matting it with an MOPA RF amp will get you to the point where you want to be.

    MM
    Last edited by marathonman; 07-25-2017, 09:53 PM.

    Leave a comment:


  • BroMikey
    replied
    Now I am catching on.

    The REAL Rife Machine by John Bedini - Bedini RPX

    https://www.youtube.com/watch?v=whfg6om-n_c

    --------------------------------------------------





    Last edited by BroMikey; 06-09-2017, 09:18 PM.

    Leave a comment:


  • BroMikey
    replied
    Wow that is a deal, let me think about it. That is low priced.
    Are you sure you want to go that low? Well anyway people
    will get a great bargain, you always come thru Aaron, Thanks

    Let me study up on this and I'll get back to you. I hope there are
    some left by the time I get back.



    Thx Aaron for answering my questions.


    Bedini RPX - What are the sidebands generated?

    https://www.youtube.com/watch?v=v1sjADHELRI

    -------------------------------------------------------

    Last edited by BroMikey; 06-09-2017, 08:51 PM.

    Leave a comment:


  • Aaron
    replied
    Bedini rpx sideband generator - new signal generator to be included

    BEDINI RPX SIDEBAND GENERATOR - NEW SIGNAL GENERATOR TO BE INCLUDED

    We sold out of our second production run of 150 RPX units and just received our third production run of another 150 units. This is the most sought after Rife machine on the planet hands down!

    The signal generator we were using was the Velleman HPG1 and we actually had to buy out the entire company's remaining inventory and we're just about out of them. Velleman has a replacement HPG1MK2, but the cost is higher and they don't even come with a rechargable battery pack built in. It looks like a great little unit, but we're not that interested in paying more for less and we don't want to charge more for less.

    Therefore, for the time being, we're keeping the RPX COMBO price the SAME while providing a function generator that is way more robust than the HPG1. We have a small number of these units being shipped to us right now and these will be included with the next COMBO units that get shipped out. It may be 1-2 weeks before your COMBO can be shipped, but it will be well worth the wait. If you're just ordering the RPX unit by itself, it can ship ASAP. If we have enough interest in the new signal generator unit for those who already purchased an RPX or RPX COMBO in the past, we will consider making the signal generator available as a stand alone item. Otherwise, we will only offer it in the COMBO.

    Check out the new Signal Generator here - available without a price increase for the COMBO: Bedini RPX Sideband Generator

    The most authoritative expose on what Rife technology was really about, get John Bedini's DVD and Book set here - it will debunk all the misconceptions: Bedini RPX - Book & DVD Set

    Leave a comment:


  • Aaron
    replied
    Bedini RPX Sideband Generator

    You can see what some are saying or asking here: Bedini RPX Sideband Generators more active than this forum on this topic.

    Leave a comment:


  • wjcroft
    replied
    Would like to hear some feedback from RPX owners

    Hi, I completely understand that A & P Electronic Media does not want to make any claims whatsoever for this technology. And that it is intended for experimental use only.

    But (just like with Amazon product reviews) I'd like to see some comments from users about how satisfied they are with their units. And what kind of experiments they have been conducting.

    I realize that no claims should be made by Aaron or the owners of the units. (Such as RPX will do this or fix that.) But at least the owners could say what kind of practical uses they have found for their RPX. With the readers understanding that their mileage will surely vary.

    Best regards, William

    PS I am familiar with Rife technology, but have never owned any devices.
    Last edited by wjcroft; 05-11-2017, 01:37 AM.

    Leave a comment:


  • Aaron
    replied
    Goodbye velleman hpg1!



    The Velleman HPG1 is a small portable signal generator that we use with Bedini's RPX Sideband Generator. The audio signals bounce off of a high frequency fundamental and causes other frequencies to ripple off that hit all the REAL Rife Frequencies. The HPG1 is affordable and works well but Velleman is discontinuing it. Therefore, we purchase the company's entire remaining inventory and there are only 20 something units left!

    That means that the RPX Combos right now will come with this HPG1 and once they're gone, they're gone! We will be forced to go with Velleman's more expensive replacement unit, the HPG1MK2 that could add more than $50 to the Combo price. Get your RPX Combo at the lower price here: Bedini RPX Sideband Generator

    Leave a comment:


  • Aaron
    replied
    Bedini RPX Sideband Generator



    Bedini RPX
    3.1 MHz Sideband Generator


    NEW 1 YEAR GUARANTEE

    Although we have a NO REFUND policy for these units, we are now offering a 1 year guarantee! If your unit stops working within one year from the time you receive it, just send it back to us and if we can't fix it, we will send you a new replacement unit.

    MADE IN U.S.A.

    Our new RPX Sideband Generators are built right here in Spokane, Washington, USA and are assembled by a professional company that specializes in surface mount circuits. The quality and workmanship is guaranteed per the new 1 year guarantee above.

    Yes, we understand that other countries manufacture fine quality products too, but we're choosing to support a local company that is right here in Spokane, Washington, which employees people right here.

    BUYER'S AGREEMENT PAPERWORK PROCESS ELIMINATED

    Instead of having to sign a buyer's agreement and send it to us by mail like before, you can simply read the buyer's agreement on our website. You can simply agree by clicking the buy button at the bottom, which means you automatically agree. Simple!


    WE NOW TAKE PAYPAL!

    We no longer only accept checks, money orders or Western Union payments. Simply make your purchase with PayPal! If you wish to send us payment by other means, you can do that too.

    VELLEMAN HPG1 POCKET FUNCTION GENERATORS AVAILABLE HERE & WE WILL PRE-PROGRAM THEM FOR YOU FOR THE RPX SIDEBAND GENERATORS!

    We are now distributing the Velleman HPG1, which is your most economical option for a function generator that must be used with the RPX Sideband Generator.
    We will even program it for you! All you have to do is hook it up and turn it on - simple! This is only available in the combo package.

    RPX COMBINATION PACKAGES AVAILABLE

    You can now get the RPX Sideband Generator in a package together with the Velleman Function Generator, Talentcell Battery and the required cables all in one purchase!

    The only think you have to do is strip the ends of the cables on the banana plugs and connect them to your own electrodes, pancake coil or whatever method you want to use to transmit the output of the RPX Sideband Generator.

    This will save you a lot of time and effort by getting everything in one single purchase.


    BEDINI RPX SIDEBAND GENERATOR


    Leave a comment:


  • Aaron
    replied
    double sideband

    Originally posted by spacecase0 View Post
    is this single sideband (if so is it USB or LSB ?)
    or double sideband ?
    I believe it may be double sideband since the fundamental frequency is also there at the same time. If the fundamental is considered the carrier, then it is double sideband.

    Look at post #11 where I showed John's video - you can see it on the spectrum analyzer.

    Leave a comment:


  • spacecase0
    replied
    is this single sideband (if so is it USB or LSB ?)
    or double sideband ?

    Leave a comment:

Working...
X