Eric Dollard

[aminnovations]

811A Vacuum Tube Generator

... Will you soon be posting circuits of your vacuum tube generator? ...

Hi,

As good fortune would have it, I had previously written quite a lot for part 1 of the 811A vacuum tube generator. I have gone ahead and finished this post now, and it can be found here:

Vacuum Tube Generator (811A) - Part1 | AMInnovations

I also plan to follow this post up soon with part 1 for the spark gap generator, and another post looking at the workings and characteristics of an original 1920s H.G. Fischer Diathermy machine, both of which are also useful and interesting generators for exploring TMTs.

Best wishes,
Adrian

[Danny B]

Seismic detection gid

Well, this is the Eric Dollard thread so, I guess that it is the best place to send a message.
Eric, we met a couple of time in Lone Pine. I found something that should interest you.
China has constructed a massive radio antenna facility covering more than 1,000 square miles
The WEM project will also be used for detecting seismic events
https://sputniknews.com/military/201...enna-facility/

[phi1.62]

What is the current status of Eric's Seismic Detection System? The reason why I ask is that I've seen recent reports in the media about Oarfish being found washing up on beaches in Japan, which some people believe are a sign that a large earthquake or tsunami will occur soon.

On the topic of Eric's Seismic Detection System, has anyone attempted to replicate this?

[Aaron]

contacting Eric

Well, this is the Eric Dollard thread so, I guess that it is the best place to send a message.
Eric, we met a couple of time in Lone Pine. I found something that should interest you.
China has constructed a massive radio antenna facility covering more than 1,000 square miles
The WEM project will also be used for detecting seismic events
https://sputniknews.com/military/201...enna-facility/

I just saw this Danny - Eric rarely has access to a computer so I would recommend sending him anything you want to his Lone Pine, General Delivery address. He almost always writes back, but may take a while.

[Aaron]

Eric Dollard live call coming

Eric Dollard will be giving not one, but two presentations at the 2019 Energy Science & Technology Conference! The 2019 ESTC is July 11-14 in Hayden, Idaho at the Eagles Lodge. It is a little under 1 hour from the Spokane International Airport in Spokane, Washington.

We are now accepting payments so get your ticket now so you can come meet Eric in person and see him at his best. With the Colorado Springs presentation and demo, it will definitely be a once-in-a-lifetime opportunity. If you can help pitch in to fund the building of this project, you can send donations by PayPal or by check/money order through the mail - details are in the right column of Eric P. Dollard - Official Homepage - The only man who has replicated Tesla's wireless transmission technology.

For general conference information, visit 2019 Energy Science & Technology Conference ? Exclusive conference with the Pioneers of the modern day Tesla & free energy movement!

To go directly to the registration page, go here: Registration Form

If you're already registered and want to purchase your ticket ASAP (limited to 150 people and every seat sells out months before the conference), go here: Registration Form

ERIC DOLLARD PRESENTATION UPDATE & LIVE CALL COMING SUNDAY: I just talked to Eric Dollard and he will be giving a second presentation - it is not body/mind related, but will be presented on Thursday because its the only day where we have time to schedule a second presentation for him - it will be a 90 minute presentation and details will be released soon. This coming Sunday, there will be a live call with Eric Dollard to answer questions about his past presentations and he will describe a bit about what his upcoming presentations will be about. The free live call is on Sunday the 10th of February, 2019 at 1pm Pacific Time Zone. Here's how to get on the call: Conference Dial-in: 1-857-232-0155, Conference Code: 582590

[aminnovations]

Lahkovsky Multiwave Oscillator Impedance Measurements

Hi,

For anyone interested I have made a set of impedance measurements on the Lahkovsky multiwave oscillator (MWO), covering so far:

1. Z11 for the drive coil both with and without the MWO rings, in the range 0.1Mc/s - 20Mc/s.

2. Z11 for the MWO rings only, in the ranges 0.1Mc/s - 500Mc/s and 500Mc/s - 1.3Gc/s.

I have written-up and presented the measurement technique and apparatus, the measured results, and some analysis of the results, in two pages on my website.

Links to the pages are as follows:

Multiwave Oscillator Impedance – Part 1
Multiwave Oscillator Impedance - Part 1 | AMInnovations

Multiwave Oscillator Impedance – Part 2
Multiwave Oscillator Impedance - Part 2 | AMInnovations

Best wishes,
Adrian

[Vinyasi]

Eric's Theory of Electricity Suggests a Revised, Atomic Model

It could be inferred that Eric Dollard has given us a revised atomic model when he says that electricity can be synthesized from three ingredients. And he's not kidding when he implies that time is not a fourth dimension just as he says that time doesn't have multiple dimensions greater than one. This atomic model is composed of time, the electro-motive force and the magneto-motive force – EMF and MMF. These two latter ingredients are commonly referred to as the electric and magnetic fields of a live wire and held in a combined state within the scope of electrical phenomenon as we know it.

But they can also be non-reactive to give the appearance that they can also become separated from each other which is impossible since each is the complete reversed image of each other while also being the denial of their opposite condition.

The aether is composed of two proto-atomic elements lighter than hydrogen as proposed by Mendeleev...

https://archive.org/details/cu31924012371096/page/n33

These two sub-atomic elements are the two forces, EMF and MMF, combined with time. They exhibit action without reaction.

When they exhibit reaction, then all three factors combine to become an atom and electricity materially manifested for us to measure.

But without reaction, they cannot interact of their own motivation. So, they sit quiescent and incapable of becoming anything without preexisting matter to contribute the ability for them to interact with themselves and matter. This is why this atomic model presupposes the existence of matter along with proto-matter and both created at the same time when the Creator materialized Creation. For each needs the other. Matter needs the aether for matter to exhibit energy (which is also known as change) and proto-matter needs matter to become something more than itself. Only matter can manipulate the aether. The aether is incapable – it is incapacitated – to manipulate itself. So, the aether did not bring matter into being. It simply helps matter bring more matter and energy into being while also making their dematerialization possible back into their quiescent state of aetheric existence.

Naturally, the aether's incapacity for action with its subsequent reaction makes it impossible for the aether to be anything other than a non-compressible gas in its uniform distribution of its two sub-atomic elements mentioned by Mendeleev.

Of course, action without reaction implies the impossibility of “spending” these two forces. They cannot be consumed. They can only be reused.

Thus, a live circuit – of any magnitude – has all it needs for infinite synthesis of electricity given enough time to accumulate it.

When Eric says that electricity can travel forwards in time, he's implying the situation – standard in our conventional thinking – that current and voltage possess zero degrees of separation between them. This encourages its dissipation (radiation) and is a centrifugal atomic motion of materialistic energy (atomic energy).

And when he says that electricity can travel backwards in time, he's implying the situation in which current and voltage are 180 degrees out of phase. This is centripetal atomic motion of materialistic energy which tends to accumulate since current will flow away from areas of low voltage and proceed toward areas of high voltage indicating negative resistance...

Negative impedance converter

The third condition is when current and voltage are 90 degrees out of phase. We already know this to be useless energy whose power factor is zero.

The fourth condition is when instantaneous annihilation occurs whenever centripetal meets up with centrifugal and anything atomically involved with this short engagement recedes back into the aether.

These four conditions are the only “four forces” which an honest physics should be admitting to. Not: gravity, electromagnetism, strong and weak nuclear forces, for all these four are definable by proto-matter. Use your imagination. Brighter minds than I will flesh out this perspective into a wholesome view of reality. Eric has given us the clues to proceed forwards with a greater sanity.

Without building anything, simulators suggest all the observational data necessary to take Eric's theories and run with them provided the observer has the consciousness to proceed along these lines of reasoning. If it's not there in consciousness, then no amount of bickering can convince such a delinquent point of view to expand into a broader perspective.

Simulators don't lie. They are embodiments of our theories. But they do require our interpretation. This is where formal education lacks the vision to proceed into a world of abundant sharing for everyone.

To recapitulate...
EMF is the cause for MMF to manifest as a reaction to EMF whenever the materialization of energy is invoked.
And...
MMF is the cause for EMF to manifest as a reaction to MMF whenever the materialization of energy is invoked.
Thus...as Eric says...
Each is the denial of the other. This is why the aether has no reaction to action. For as solitary individual forces, these two forces each deny the karmic consequence to the actions of themselves. Instead, they dump the reaction to the actions of each onto its opposite force whenever electricity is manifest in atomic matter heavier than themselves (beginning with hydrogen on the periodic chart and proceeding upwards).

Oddly enough, each of these two solitary forces (always bound to time, but lacking the capacity for reaction to take place within themselves) is the mirrored opposite of the other force. So, although they each deny the existence of the other force, they are one and the same force as seen from two opposing perspectives. Each of these two perspectives render their unique identities. Without these two perspectives, they would not appear to be any different from each other. This is the true dipole in Creation: ever present, eternal, indestructible and non-creatable.

If anything is consumable, it is time. For time consumes itself. We can't consume it. Time's union with these two forces, plus the mirrored opposition between them, is what makes the consumption of electricity possible as an illusion since nothing is lost when either force can flip into its opposite force and time will already be gradually lost to us regardless of whether or not we bother to consume anything.



Thanks, Eric, for giving me an opportunity to grow.

[Marcus Neuhof]

Hi,

For anyone interested I have made a set of impedance measurements on the Lahkovsky multiwave oscillator (MWO), covering so far:

1. Z11 for the drive coil both with and without the MWO rings, in the range 0.1Mc/s - 20Mc/s.

2. Z11 for the MWO rings only, in the ranges 0.1Mc/s - 500Mc/s and 500Mc/s - 1.3Gc/s.

I have written-up and presented the measurement technique and apparatus, the measured results, and some analysis of the results, in two pages on my website.

Links to the pages are as follows:

Multiwave Oscillator Impedance – Part 1
Multiwave Oscillator Impedance - Part 1 | AMInnovations

Multiwave Oscillator Impedance – Part 2
Multiwave Oscillator Impedance - Part 2 | AMInnovations

Best wishes,
Adrian

Hi Adrian,
Thank you for your as usual high quality experiments and write-ups.

A few questions that arose in the reading:

• You cite a presentation by Eric Dollard on the design of the MWO, ostensibly given at the 2018 ESTC. However Eric Dollard's 2018 talk was on the power grid. Where can we find this presentation on the MWO?
• Your discussion of the SFA adapter board cites the use of equal copper volumes in order to avoid impedance issues. To date I have only seen the 'equal volumes of copper' principle applied in coil design, a very different context. The RF printed circuit / stripline design principles I am familiar with are very different, focusing on e.g track width, board material dielectric constant, distance to adjacent ground planes, board thickness, etc. What evidence is there that the 'equal volumes of copper' approach is useful in the printed circuit board domain?
• Are the resonant points of the MWO top load consistent with the LC tank circuit model, where the inductance of the ring interacts with the capacitance between the two spheres? Evidence that this is NOT the case might be seen in the coil measurements, where the phase shifts are aligned closely with the impedance peaks. This alignment is not seen so much in the top load measurements. The question of the MWO top load acting as an LC resonator is significant inasmuch as this hypothesised behaviour was the inspiration for Eric Dollard's PCB "golden ratio" antenna for the MWO.
• Do you have any plans to perform similar measurements on the above-mentioned PCB "golden ratio" MWO antenna?

[Aaron]

Eric Dollard Live Call coming Sunday

Eric Dollard Live Call Scheduled - March 17, 2019 at 1pm pacific daylight savings time.



Conference Dial-in: 1-857-232-0155
Conference Code: 582590


I always post the phone number and pin code and people keep asking how to get on the call. This is just a simple, old-school telephone number that you dial and then enter the conference code when asked and it will let you into the call. It will most likely be recorded and put on YouTube afterward.

[Aaron]

Colorado Springs Update

UPDATE ON COLORADO SPRINGS SCALE MODEL REPLICATION FOR ERIC DOLLARD'S UPCOMING PRESENTATION

http://ericpdollard.com/2019/04/08/c...model-update-1

[Aaron]

The Revival of the Science of Electricity in the Digital Age

Revival of the Science of Electricity in the Digital Age

In this paper, Eric Dollard covers the historical perspective and theoretical basis for electrical engineering. This is necessary since the modern-day idea of Electrical Engineering has degraded in to what he considers delusive denouncements enforced by a cabal of academic theoreticians. Eric covers the foundations, which originated from Faraday’s experiments and Maxwell’s mathematics.


This foundation laid out by Faraday and Maxwell and it was essential for the Aether to be involved. Later, the “Electron” and the Einstein-Minkowski Relativity replaced this model although the Aetheric model was functional, sensible and engineerable.


Learn what the real pioneers of the electrical sciences thought of this cover-up, which pushed out the Aether, worshipped “Maxwell’s Equations”, which are not Maxwell’s equations, and put the Electron on a pedestal even though it’s “discoverer” J.J. Thompson admitted it is useless.


This paper includes many of their quotes in the proper context as well as all the references so you can verify it yourself. A list of Eric’s work is included on the last page.


This information is an important part of his presentation coming up at the 2019 Energy Science & Technology Conference where he straightens out what Tesla’s Colorado Springs transformer is about as well as a scale model demonstration.


Get the free paper here: Revival of the Science of Electricity in the Digital Age - Eric P. Dollard - Official Homepage

[Aaron]

03-17-2019 Eric Dollard Live Call Recording

03-17-2019 Eric Dollard Live Call Recording

03-17-2019 Eric Dollard Live Call Recording - Eric P. Dollard - Official Homepage

[t-rex]

New presentations

I am back in a cage. Two new presentations under construction

1 - electrodynamic seismic forecasting

2-theory, calculation, and operation of the colorado springs tesla transformer

also,the 20 to one scale model is under construction

as expected,the fatuity of employing maxwell's equations and scalar waves will be made evident so as to irritate the ieee boys and girls.this presentation is directed towards engineering solutions and definitions relating to the design and operation of such apparatus.

I am disappointed in the lack of response to my last presentation. Let it burn?

73 de n6 kph

[Sputins]

I am back in a cage. Two new presentations under construction

1 - electrodynamic seismic forecasting

2-theory, calculation, and operation of the colorado springs tesla transformer

also,the 20 to one scale model is under construction

as expected,the fatuity of employing maxwell's equations and scalar waves will be made evident so as to irritate the ieee boys and girls.this presentation is directed towards engineering solutions and definitions relating to the design and operation of such apparatus.

I am disappointed in the lack of response to my last presentation. Let it burn?

73 de n6 kph

Your last presentation showed there’s almost a deliberate “Trojan Horse” being built in to the U.S. electrical networks. – Perhaps one day when an EMP event happens, people will begin to realise the importance of that particular presentation. – Except their Computers won’t work anymore…

The two new presentations sound like they will hold more interest in general. - Electrodynamic seismic forecasting via listening to the electrodynamic signature of the Earth’s interior makes a lot of sense. - Particularly for the Electric Universe (EU) folks, who should have a high interest in it.

As for the theory, calculation, and operation of the Colorado Springs Tesla Transformer – I think this is the presentation that everyone has been waiting for… Something they can engineer (models), build, experiment with and begin to understand such apparatus – all done in true Dollard style and in opposition to the IEEE’s version of explanation.

73’s.

Sputins and his Chickens.

[Vinyasi]

Ernst Alexanderson's Variable Induction Alternator

I noticed the image is broken in this post of Eric's...

https://www.energeticforum.com/204306-post72.html

So, I've added it's archived version here...