Eric Dollard

[Aaron]

Aaron,
In the older format you had activated an Email notification that was sent to Forum members when a new Post was received.
Is that possible to be implemented here?
All I am doing is to get some of those people back who were involved with the original Crystal Set Initiative.
They are missing out on basic and valuable information.
Thanks

Smokey

To answer your other question - posts here by Eric are possible when he is with someone who is able to login and make the posts for him with him sitting right next to him.

I'll see what I can do.

Sounds like you're describing the option for people to subscribe to a thread? That still exists. At the top right corner of any thread on any page, there is a button +Subscribe, I think that is all they have to do after they're logged on.

Let me know.

[David G Dawson]

Aaron,
In the older format you had activated an Email notification that was sent to Forum members when a new Post was received.
Is that possible to be implemented here?
All I am doing is to get some of those people back who were involved with the original Crystal Set Initiative.
They are missing out on basic and valuable information.
Thanks

Smokey

[David G Dawson]

Tesla Colorado Springs:

Always something here that bothers me and I go back to the CS Notes to try to fathom out.
I had made an error in an earlier calculation and in review find the result was appropriate as it again, confirmed both mine and Bruce Cathie's theory.

Page 349 and we are dealing with frequency n = 93,110 and p = 585,000 which is final full wave frequency but how do you get to that level?
Simple:
93,110 * Pi/2 = 146,257 * 4 = 585,000

Page 80 top of page:
p = 2Pi * n
OR
p = Pi/2 * n * 4

Same thing, however, I do it the P1/2 way to show each step in the process.

There you have it, you simply have to search for your answer.
In all of this we are transmitting at the Earth Resonance Frequency (ERF) of about 148 Khz via the Extra Coil.

I have designed a 10' x 6" pvc tube ground aerial after Rogers that is in four sections that are able to be fully rotated from outside the tube at ground level or the four sections can be aligned in a Polar manner or straight line.
An attempt to verify some of the features of ground aerials or as energy collectors.
Quartz rock is used as the filling around the pvc tube and this is analogous to a massive crystal radio crystal with its inherent radiation properties.
Tesla and his Coherer is still vivid in my mind as I can see earthly currents being able to agitate this quartz mass as are generated by distant thunderstorms as in Tesla's 500 miles 805 kms.
That, by the way is from Sydney to Brisbane or San Francisco to San Diego.

My problem is that we are still here on our property but may still go ahead with this idea as it may just beat a strung wire and nobody appears to want to experiment with these old and hidden radical ideas that work.
Eric's Electrical Experimenter.

Smokey

[David G Dawson]

For the Record:
Crystal Radio Set Initiative - CSI:

https://kupdf.net/queue/crystal-radio-initiative_5af89140e2b6f5131fd54e23_pdf

Confirmation of a particular condition with this device where I had a 'run-in' with Eric Dollard.
He called me a 'zealot' as he was suggesting that my interpretation of conditions was wrong and that he was right.
I had already proven by build that his Extra Coil was wrong (too fine a wire and way too many turns) and the one that I had made was working and was able to hear a re-radiated signal from the Extra Coil some 20" distant from it where his was dead.

In the back of my mind during this entire experimentation build that I did not know at what frequency Tesla was actually using and this always bothered me and I guessed at about 94.7 Khz with a possible Pi/2 connection to 148.75 Khz (my 'multiply').
This is my extract from that conversation and is available on Page 220 of 302 of the CSI PDF above:

Do the quick math here and you get 60.267 * Pi/2 = 94.6672kHz * Pi/2 = 148.703Khz
Both wire lenghts for the secondary and the Extra Coilare for the same frequency of 94.6675kHz.
In this I see a 'one-wire' connection to the Extra Coil in free space that would allow it to resonate at something other than the Transverse Electro Magnetic TEM frequency achieved by a simple transformer association.

Tesla never mentions this in his Notes and I suspect he has done so to retain ownership of the theory which he simply does not approach from any direction whatsoever.

I had come in late with this CSI build and had already done considerable home work before I attempted the build and had fully read the 'Colorado Springs Notes' several times and had made up my own calculated coil sizes which didn't necessarily match those of Eric and this was also prominent in the number of turns in the secondary where we also disagreed.

I made up a small chart to show where he was working and where I was and called it a 'divide' or 'multiply' situation - see attached.
This shows where Eric was working in the 'divide' part of the waveform and where I was working in the 'multiply' part and all this meant and showed was that Tesla was working also in the 'multiply' area and NOT the divide.

I have reread postings here and am somewhat ashamed by my attitude as it was not real nice and I came over a little strong and my unreserved apologies apply.
However, I remain convinced that I was right and have had confirmation of that theory from Bruce L Cathie and his Book 'The Energy Grid - Harmonic 695'.
How sad that all of the initial builders slowly disappeared and can only put this down to an experimental research type environment where all of the facts are not presented clearly or are simply not known and it just takes time to nut all of these particular problems out.

Well, lo and behold, here I am reading Bruce L Cathie's Book 'Harmonic 695' and what do I see:

Quote:
"He discovered that a rate of 150,000 oscillations per second which produced electrical pulsations with a wavelength of 2,000 meters was necessary to produce the effects he required in the transmission of usable power through the earth."
AND
"The exact number of cycles to obtain 1.08 minute wavelength would be 149,892.18 per second. This would tune the transmitter in harmony with the world grid system".
AND
The experimental value was therefore very close to 1.08 minutes of arc, or one twenty thousandth of the circumference of the earth. 21600 minutes divided by 1.08".

2,000 meters to a minute of arc = 1.0792237 Page 107.

Tesla had to ensure that he was radiating a signal in free air that also contained energy and this had to be something other than the TEM component which is a metal mass component.
So the addition of the 'Extra Coil' after the secondary allowed something 'out of the box' to be generated and in such was the LMD component at C*Pi/2 speed and using no conductors.

Tesla was in tune with all of this but did not make it a part of his notes and was probably his secret in a bid to retain ownership.
So, just how close was I and correct in the mind games and now wanting to get back to that experiment.
I feel that Bruce Cathie had also deduced as I had, that Tesla had designed to use the LMD component of the 'Extra Coil' on the multiply side to achieve an earth resonace at the 149Khz.

Do I dare present this to the Dollard Forum?

The implications of this simple review is kind of mind boggling as it is the difference between a working and a non-working Tesla Magnifying Transmitter (TMT) or one that is damn difficult to tune and one that isn't.

Doing my best to get back into the Lab for brief periods to complete all of my Projects as the CSI is but one of about 5 and all having OU prospects.

Aaron - Is it possible to get Eric back at the Forum where we have many questions to be addressed as it IS his Forum - Thanks.
Good to see the Linear Amp coming along and looking forward to further progress reports.
A Live Call with Eric is simply out of the question here.

Smokey

[Aaron]

Note to Eric for feedback:

[Aaron]

ERIC DOLLARD LIVE - starts in 10 minutes

Call in for the latest updates and ask Eric Dollard questions live - Saturday, February 8th, NOON Pacific Time Zone. Call +1 857-232-0155 and enter the code 582590 to access the call.

Come ask Eric Dollard questions live or just listen in!

In the meantime, consider donating to EPD Laboratories, Inc to support the work of Eric Dollard. Information on donating by mail or by PayPal are on http://ericpdollard.com

[Aaron]

ERIC DOLLARD LIVE CALL TOMORROW NOON PACIFIC TIME

Call in for the latest updates and ask Eric Dollard questions live - Saturday, February 8th, NOON Pacific Time Zone. Call +1 857-232-0155 and enter the code 582590 to access the call.

Come ask Eric Dollard questions live or just listen in!

In the meantime, consider donating to EPD Laboratories, Inc to support the work of Eric Dollard. Information on donating by mail or by PayPal are on http://ericpdollard.com

[Aaron]

ERIC DOLLARD LIVE CALL COMING SATURDAY

Call in for the latest updates and ask Eric Dollard questions live - Saturday, February 8th, NOON Pacific Time Zone. Call +1 857-232-0155 and enter the code 582590 to access the call. In the meantime, consider donating to EPD Laboratories, Inc to support the work of Eric Dollard. Information on donating by mail or by PayPal are on http://ericpdollard.com

[Aaron]

Aaron,

Please let me know if you and/or Mr. Dollard
are willing to take a look at a mathematical 'identity'
which simultaneously equals both 1 and Φ³

That would be a question for Eric as I don't understand the math well enough. I'd recommend writing to him at his Lone Pine address, which is listed on http://ericpdollard.com. That is the best way to get a personal response from him.

[nothing]

David, we're going to do another live call sometime in the near future if you want to get on and talk to Eric directly about this.

Aaron,

Please let me know if you and/or Mr. Dollard
are willing to take a look at a mathematical 'identity'
which simultaneously equals both 1 and Φ³
An example of plotting this one expression
into a random math website:

h1.jpg

I believe this identity is extremely important
as it relates to electromagnetism
and/or sacred/universal geometry.

I believe it solves a number of the outstanding Millennium Problems - certainly the Reimann Hypothesis,
thus I want an actual electrical engineer / experimentalist who knows the math to see it.

Please pm me so I can get it to you.

Thanks Aaron,

[Aaron]

Farnsworth's Multipactor Tube:

https://borderlandsciences.org/journ...ctor_Tube.html

Hello Eric,
As you spent many hours working with Philo, is there anything that you may like to add with respect this device.
No filaments, no grids and a cold cathode device.
You made a comment in the 'Functional Thinking' interview with Thomas Brown that you believed it was - "probably the only real free energy device that anyone ever demonstarted which can be reproduced"

David, we're going to do another live call sometime in the near future if you want to get on and talk to Eric directly about this.

[Aaron]

Hi,

I have added a new post to my website:

I got those two vacuum variable capacitors from Ukraine finally - will get on the mounting stuff soon. I might as well either post that here or start a new thread on the project I'm building.

[David G Dawson]

Radio World - Multipactor:

https://www.americanradiohistory.com...multipactor%22

More on the Multipactor and found only one entry in the above magazine and from there guessed where it all went - into suppression.
Soon as you here 'negative resistance' and 'secondary emission' and '20db down' from a cold cathode tube you must expect something in return that it will never be heard of again and such is the case.
Reason why I have a stash of 24As here and also Eric's 6AS7 and similar.
Note that the mention is of certain groups holding all the Patents for Oscillators and they didn't like this one because it was too close to something being free.
It pays to read these old magazines to find out what you are really missing out on when it comes to 'Energy Synthesis' as they do hold a great deal of odd material on discoveries that are soon to be no longer heard of.

Going through all of my Tubes here to see which ones come closest to a Multipactor.

https://www.americanradiohistory.com/index.htm

Welcome to the Matrix!

Smokey

[David G Dawson]

Farnsworth's Multipactor Tube:

https://borderlandsciences.org/journ...ctor_Tube.html

Hello Eric,
As you spent many hours working with Philo, is there anything that you may like to add with respect this device.
No filaments, no grids and a cold cathode device.
You made a comment in the 'Functional Thinking' interview with Thomas Brown that you believed it was - "probably the only real free energy device that anyone ever demonstarted which can be reproduced"

https://pdfslide.net/documents/funct...-brownocr.html

Also you made comment - "Free energy will never come out of magnetism unless the magnetism is tricked with hysteresis".
Hysteresis meaning magnetic retardation or inertia.
Would you please expand on this statement.

Thank You.
Trusting all is well with you.

Smokey

[aminnovations]

Hi,

I have added a new post to my website:

http://www.am-innovations.com/vector...nalyser-dg8saq

This post on the Vector Network Analyser (VNA), the DG8SAQ by SDR-Kits, is the first in a sequence looking at how to use advanced test equipment to measure the properties, characteristics, and electrical parameters associated with Tesla coils and TMT transmission systems. The post includes two videos covering setup, calibration, measurement, and software, which forms a step-by-step introduction to get up and running in measuring the impedance properties of Tesla coils using this very functional and yet cost-effective VNA.

The videos are intended to demonstrate the following:

1. An introduction to Tesla coil measurements using a usb connected vector network analyser.

2. Connecting the VNA directly to the secondary of a Tesla coil for series-fed measurements.

3. Connecting the VNA to the primary of a Tesla coil to measure Z₁₁, the small signal input impedance from the perspective of the generator.

4. Connection considerations and methods when using coaxial, and twisted-pair cables.

5. Consideration of calibration reference plane, and techniques to extend the reference plane directly to the primary coil inputs.

6. Calibration of the VNA for Z₁₁ measurements using a short, open, and 50Ω termination.

7. The VNWA software to calibrate, measure, display, and store the data.

Best wishes,
Adrian