Eric Dollard

[Aaron]

Versor Algebra As Applied to Multiphase Power Systems, Chapter 1, Section 1

Some of this was posted before, here it is again, there are 3 whole sections available right now from Eric's draft. These are copyrighted by Eric so do not repost these anywhere else - they are only for YOUR personal use.

THIS WILL BE A SERIES OF POSTS - STARTING WITH THE FIRST THE SECTIONS - ONE ADDITIONAL SECTION WILL BE POSTED ABOUT ONCE A WEEK - THEY'RE AUTOMATICALLY QUEUED UP IN ERIC'S BLOG TO BE POSTED. WHEN THEY ARE, I'LL COPY AND PASTE IT HERE.

When the final book is available, please purchase a copy to support Eric Dollard's work with EPD Laboratories, Inc.

This book is Part 2 to Four Quadrant Representation of Electricity, which is a book and video presentation from the 2013 Energy Science & Technology Conference.

Versor Algebra as Applied to Multi-Phase Power Systems – Chapter 1, Section 1 | Eric P. Dollard – Official Homepage

Versor Algebra
Versor Algebra as Applied to Multi-Phase Power Systems – Chapter 1, Section 1

August 25, 2014 Eric Dollard


This book is Part 2 to Eric Dollard’s book Four Quadrant Representation of Electricity, which is what his 2013 Energy Science & Technology Conference presentation was based on.


The following are 6 pages, which are in order from left to right starting with the top row.


This draft is copyrighted by Eric Dollard so do not repost these images anywhere else online. You can copy these graphics for your own personal use. We will post the rest of them in sequence as a series so you can get them all.


When the book is available, which will be fully transcribed in book form, please purchase a copy to support Eric Dollard’s work with EPD Laboratories, Inc.


And please help spread the word about Eric Dollard’s Official Discussion Forum here: Eric Dollard

[Aaron]

Versor Algebra As Applied to Multiphase Power Systems, Chapter 1, Section 2

Versor Algebra
Versor Algebra as Applied to Multi-Phase Power Systems – Chapter 1, Section 2

August 25, 2014 Eric Dollard
The text references equations. You must get the equations below the text to see the equations referenced.
















Here are the referenced equations in the text above:

[Aaron]

Versor Algebra As Applied to Multiphase Power Systems, Chapter 1, Section 3

Versor Algebra
Versor Algebra as Applied to Multi-Phase Power Systems – Chapter 1, Section 3

August 25, 2014 Eric Dollard
Text:













Equations:

[Aaron]

Cosmic Induction Generator

John Polakowski's Cosmic Induction Generator presentation will be released tomorrow.

[Aaron]

Eric Dollard update

Eric Dollard has been unavailable for a while but I did have a good long conversation with him today. I'll be posting a YouTube video with a recording of some of the latest updates of what he is up to. There will also be a live Q & A conference call for anyone that purchased his Extraluminal Transmission presentation on the Sep 27th at 11AM pacific time zone.

I'll also be posting the next free section of his Versor Algebra book scans on his site ASAP. More to come...

[Aaron]

Versor Algebra as Applied to Polyphase Power Systems – Chapter 1, Section 4

Versor Algebra as Applied to Polyphase Power Systems – Chapter 1, Section 4 | Eric P. Dollard – Official Homepage

TEXT:

[Aaron]

Versor Algebra as Applied to Polyphase Power Systems – Chapter 1, Section 4 equations

EQUATIONS:

[Aaron]

Versor Algebra as Applied to Polyphase Power Systems – Chapter 1 Section 4 equations2

[Marcus Neuhof]

Thanks, Aaron. Equations p. 20 and p.29-31 are missing from that upload.

[Aaron]

@Marcus

Thanks, Aaron. Equations p. 20 and p.29-31 are missing from that upload.

Hi Marcus,

That's what I though too when I was uploading them. However, all equations are there that are referenced in the text.

Pages 29-31 are actually in the next Section 5 that I'll upload in a week or so and those equations go to the next series of text so it's all good.

According to the text, did you see any referenced equations that were not there in case I missed something?

Thank you.

[Marcus Neuhof]

Looks like you are correct. I have not found any missing equations referenced in the text so far.

[mikrovolt]

I found the people that are responsible for conquest and destruction of the Alexanderson repository of important artifacts.

About them - Commonweal

and also

About - The New School at Commonweal

[Aaron]

Eric Dollard Update 2014-09-16

Latest update with Eric Dollard 2014-09-16 https://www.youtube.com/watch?v=XoHwT5eUIys

[David G Dawson]

Progress & Eric Dollard

Progress Update:
Thanks partly to Mr Dollard and the Cathode Ray Detector (CRD), we now have 11 Twin Coil Dongers here and most still with their brass bells - leaves electronic alarm systems for dead where they lack that pristine quality.
I had already seen some benefits in the twin coil arrangement as Lester Hendershot used these in his Generator for the 'resonator' which we are still working on.

In 'Energy Synthesis' (ES) we are seeing a relationship here between two coils where they are in a parallel arrangement but pulsed in a manner that a 'kick' is induced which is a property of the ambient energy.
A third coil is used as a 'collector' of the energy produced being at right angles to the previous two.
Something about Copper giving and Aluminium accepting but don't like the 'electron' bit, something else is being given and taken here and what do we really mean - is it a transfer of Aetheric matter from one, a 'host, to another, a 'collector'?
It is already known that the Aether 'loves a vacuum' but what else is there to fill that evacuated space - the Aether!

We already also know that the 'Electron Microscope' is a sham and that there is no 'electron' and they still are unable to see this figment of somebody's imagination that got dreamed up as fact and fostered as such by those in control.

How would Eric Dollard define what it is that actually is being transferred inside a Vacuum Tube?

This is the type or kind of information that I seek and not what is currently being presented - Thanks!

This will relate to nearly all of the ES devices that you see being built but nobody as yet has quite grasped an organisation that everybody can build.
I bought the Jim Murray & Paul Babcock package after the Conference as I felt it would help me most but came away disappointed as it was a device that I could not build and all they wanted was money to assist their development.
I don't like this word "SECRET" - it doesn't help.
I have my own development to fund and cannot afford something that is not going to assist me at the BENCH!
I have Eric's 'The Extraluminal Transmission System of Tesla and Alexanderson' on my buy list but it will have to wait.

So far from the Conference all I have is information that is of no benefit to me and pages of Math might be good for those behind a keyboard but
not for the 'electrical experimenter'.

I am going my own way with the CTPU (Contractive TPU) using TV Neck Ferrites with Vacuum Tubes as drivers in opposition to Steven Mark's expansive or ETPU (Expansive TPU).
Currently building a twin 5U4G power supply as used in the RCA CTC-5 colour TV, the one that imploded in Chicago in the 60s.
This is a similar arrangement to the ES description I gave above, two systems in parallel where one goes slightly astray and develops an energy that is equal to a lightning strike.
RCA actually stated in the documentation that they used two Tubes 'in case one failed', little did they know.
It is already known that you get problems if you parallel two not identical transformers as an oscillation can be set up in one that goes ballistic.
Now you might be able to see what it is that we have in the 'Crystal Set Initiative' (CSI), pretty much two coils in a parallel configuration where one is distictly different physically to the other and you get this imbalance that gets set up which interacts between the two and you get this magical amplification BUT you need to get the physical dimensions and oscillations correct before this will happen.

You might be interested in Magnetic Amplifiers and find this most helpful in an understanding as it is directly related to the above:

Homemade Magnetic Amplifiers.

and:

http://www.themeasuringsystemofthego...amplifiers.pdf

I see a need for a Spectrum Analyser to assist in the development of the CTPU as I need to be able to see the frequency where the 'kick' is being generated and being able to work from there.

Difference Between Oscilloscope and Spectrum Analyzer

Another question for Eric with reference to Vacuum Tubes (VT):

What components of a wave or signal in a VT are still available as I am led to believe that the even harmonics are destroyed by solid state and considerable feedback is required to maintain a comprehension in the signal due to semiconductor 'noise' and not the case in a Tube.

Certain Tubes are better than others and why Steven Mark chose the 6BQ7As but also understand why you refer to the transconductance Tubes (6AS7, 6Y6, 6S4, 12B4, 6J6, 6J4, 6336, 6528).
I did some research of the above and intend doing some tests of my own to kind of find this hidden phenomena and put it into words that all could follow as the young are very much behind the '8 Ball' where Vacuum Tubes are concerned.
As an aside that research led me to Tektronix and their Oscilloscopes and what do you see being used - 6BQ7As, 12B4s etc.
Have now a good supply of these 'outside of the box' Tubes and just waiting for experiment time.

Eric Dollard are you still there?

Smokey

[Geometric_Algebra]

Thanks for posting the versor material Aaron. I haven't tuned in for awhile, and it's always nice to see a big stack of the good stuff.