Announcement

Collapse
No announcement yet.

Roto Verter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bodkins
    replied
    Originally posted by Duncan View Post
    Ah yeah -- thats the start of the game . and if your lucky that pully will come off without to much of a fight. I'll have a little wish for you



    yea! needs to find mi Alan keys!

    Come Alan Where Are YA

    got a great geny will put up a vid on the morrow...dreams are sweet indeed!

    Leave a comment:


  • Duncan
    replied
    Ah yeah -- thats the start of the game . and if your lucky that pully will come off without to much of a fight. I'll have a little wish for you

    Leave a comment:


  • Bodkins
    replied
    Fun With RV

    Well I have started!

    pulling stuff to bits is great fun! and response Photo to share the carnage!

    Once again thank you Duncan for the message and photos of parts of your setup! all looks like a very beautiful attic of treasures, and a well insulated one too!

    you gave me a lot to think about and I am sure my path will roll over infrount of me in perfect timing as usual....

    be injoy
    Bod
    Attached Files

    Leave a comment:


  • Bodkins
    replied
    thank you Duncan,

    and bless you!

    downloaded that i could, I am only at the beginning of the Rv process so your understand is wonderful to read. I will make this short as I am a little busy tonight and cant really have a good look at the information....

    I am feeling that the time of hiding from the men in black is over! I had a attempt of my life about seven years ago, but I am WAY too well protected.

    back soon my Go Man Duncan

    Leave a comment:


  • Duncan
    replied
    Like you Bodkins I have much to deal with through most of the year and tend to bring things out of reverse hibernation as the nights draw in . The roto verter group and their great efforts really did impress me They came under tremendous pressure threats and violence individually and as a group. The quip at the end of Brian's ordeal should serve as a warning
    True technology gets violently suppressed ....not alike the "fakes" that get promoted to God status .
    I'm afraid some very important video and written work w.r.t has been ripped off the net, lost - possibly forever. I had copied some of the video series but they seem to have disappeared from my hard drive too! (how do they do that?)
    https://merlib.org/taxonomy/term/4480
    - no longer available ! a big shame. anyway I'm sure like me you'll learn a great deal and have lots of fun with the RV . There were at its height hundreds of folks experimenting with the RV. The COP + aspects were never promoted. (much) for obvious reasons, some of which are shown in the email in a previous post.
    anyway as you've been kind enough to reopen the thread with a pic. I'll make my way up into a dark corner of my attic which certainly isn't good for photo's but its where some of these things reside and take a few snaps for you with a few short explanations.
    However don't expect me to admit to reproducing the 'inverter hack' and looping COP>1 ,claiming (or videoing it) as the email says violently suppressed and IMHO thats a big understatement ! . - for me Its a hobby not an invitation to special forces to threaten my family. The first shot is easy Bodkins its a simple capacitor bank which has had various jobs to do over the years apart from the RV.
    http://dnp.s3.amazonaws.com/b/b3/RV1.JPG
    that includes confirming the outrageous predictions made for instant battery rejuvenation in this piece of work
    Capacitive Battery Charger - John Saves Energy
    Its wordplay of course but one mans zero PF is another's resonance and thats the aim one way or another in the RV or this battery charging trick.
    Incidentally George Wiseman who some might remember as being the first one to get one of John Bedini's energizer kits up and running a few years ago at one of the conferences uses this remarkable effect to spin the house meter backwards so the utility company pay him each quarter. (nice apples if you can get um!)
    Reverse Your Electric Meter, Legally! | www.eagle-research.com
    still the capacitor bank is constructed from motor run capacitors and 15 amp light switches variable from 0.1 - 80 mfd - of course inside its simple and effective - but not pretty !
    At first glance this may not look much like a typical RV - Its a hybrid Bodkins a hybrid suggested by the writer of that classic tome P J Kelly. The capacitor bank the variac and the 3ph Tesla motor are all classic components you would expect to see in any number of RVs and it is the final drive system , allow me to explain with another picture of the front of this motor drive.
    http://dnp.s3.amazonaws.com/b/b3/RV4.JPG
    That VDU slowly brings the 3ph motor up to speed which in turn allows the utilization of one of Hatem's magnetic cascades. In common with the RV Its absolutely essential that Hatem's primary drive uses minuscule input (real power) and is magnetically balanced but once started follows the Fibonacci series as extrapolation backwards of the information contained here will show
    (these are really pay to view PDFs and so save them if you wish regardless I will remove the links very soon out of fairness to the authors
    Gone - sorry if your reading this after 16/10/2017 but there's copyright issues too
    Bodkins I couldn't dig out the actual rotors I ran this with but found one of these 'also ran' ones
    http://dnp.s3.amazonaws.com/b/b3/RV6.JPG
    so perhaps you see what was happening here now Bodkins even though its in bits - In order to start Hatem's cascade a VDU and 3 ph motor are being used in standard configuration just like this-
    https://www.youtube.com/watch?v=c4FEba4kQb0
    once the rotors are locked in sync and up to speed, using the configuration of switches on the front and whilst the motor is spinning the system is totally isolated from the VDU and Hatem's systems switched over to be driven by RV techniques. (trying Hatem's cascade with a DC drive is interesting it simply runs away out of control and ends up machine gunning you with your own magnets - DC series motor with no load sort of - don't do that )
    Its all good fun Bodkins go which way you want . Brian and some other's used an inverter hack in order to tweak and loop their systems, That inverters no longer available so I won't waste time on it.regardless I
    hope theres a few bits here to help and of interest to you - best wishes Duncan
    Last edited by Duncan; 10-16-2017, 10:14 AM.

    Leave a comment:


  • Bodkins
    replied
    I just gone my first motor this week,
    looking forward to a winter of building loads of toys....to play with at Christmas...

    Great to see all these posts here i need to read thru!

    here's a photo of my three phase motor. (I almost got a 8kw but my thinks start small bod!....well smallish!) 2.2kw....
    Attached Files

    Leave a comment:


  • Duncan
    replied
    Hector et al...

    Yeah that team did some great work, a real benefit to everyone ... the **** really hit the fan when they did what we all aim to do and "looped the system ", Hector,Dan and the rest of that very skilled International group mapped out the procedure . Then of course they did it (privately).... One guy however did it a bit too publicly with a ride on lawn mower, That attracted the attention of some very unpleasant people and the predictable murder's threats and intimidation started in earnest. The basic outline of that is obvious from this historical exchange.

    Rotoverter Technology was OU before ORBO one.

    Build a better mousetrap, and the world will beat a path to your door
    Ralph Waldo Emerson (miss quoted)

    As a simple energy saving operation well and good and very effective .. If you want to take it to the next level however be careful, make this “a better mouse trap” and you really wont like what beats a path to your door.
    Still Its really nice to see you have woken up this sleeping dog the threads been dormant far to long IMHO this dog really does have teeth.
    There is lots of “in depth” theory and demonstrations still available with all the experimental data still on the Web with the required learning material. If you care to look for it.
    The very efficient system was carried out as you probably know in conjunction with Panacea university however the COP+1 stuff was to a large extent carried on under the radar for obvious reasons. (Which alas came into play anyway in due course.) It is a steep learning curve to understand how and why this system works .. however its well documented and the information is all there.
    Here is the technical Introduction PDF

    http://dnp.s3.amazonaws.com/b/b5/RE-OU-v6.1.pdf

    although as with all all systems that actually work you will have to do some detective work to relocate the original files and experimental work.
    There are a whole series of them and the teaching video's that go with the concept.
    This is the start of the video course, The squirrel Cage motor being little more than a rotary Transformer a transformer with alternate flux paths (like Joe Flynn conception) this then is where they start to prove and demonstrate the concept .. I am certainly not going to list all the locations of this information .. (The baddies must do their own spade work) … I do suggest however that you copy and archive as you search,this particular video is copied over and over so here's a start to the magnetic theory and ferro magnetic resonance,

    TV-part I - YouTube

    Some time ago I came to the conclusion that for free energy to escape the prison it has to be made simple stupid, I consider here folks that can just about change a light bulb, The rotoverter was oh so close with off the shelf stuff …. not quite a cigar though ! Brian's lawnmower blew it … a few thousand lawnmowers and IMHO the bird would have flown. Still a very clever and dedicated group of skilled engineers determined to teach, demonstrate and produce “free energy” for the benefit of all. I'm delighted to see you working on it … and posting. It works (you obviously know that now) I'm trying to get a much simpler and much cheaper method running … but as you know your on a winning horse and some great guys have put huge amounts of money, time, and R&D into what you are doing, good luck! & my very best wishes with your research
    Last edited by Duncan; 09-02-2013, 03:38 PM.

    Leave a comment:


  • sciencisto
    replied
    another toy saving 99% of power

    How to save 99% of power to run idle a 5.5 kW motor.

    Silnik 5,5 kW chodzi na 4 W. / 5.5 kW motor goes on 4 W. - YouTube

    An example of big power saving when (idle) running three phase motor of nominal power 5.5 kW (7 hp). This motor needs only 4 W of active power and 5.2 VA of virtual power. It is run from one phase, at 18 V, 0.29 A, capacitor used 55 µF.
    The same motor when connected to 400 V three phase grid consumes 400 W. Power saving is 99%.
    The motor cannot be loaded more. Almost all the power is used for overcoming the friction.
    Based on rotoverter published by Hector Torrez.

    Leave a comment:


  • sciencisto
    replied
    rotoverter loaded on 6,5 VA

    Just to inform you that running rotoverter on even lower voltages, even if it is
    shaft coupled with another motor, can require very little power.

    Here, one of experiments I was doing yesterday:
    rotoverter 6 - YouTube

    Industrial motor 5,5 kW (at 50 Hz) is powered from one phase, runs (1452 rpm)
    faster than standard rotation (1430 rpm) and consumes only 0,45 A at 14,5 V
    which is 6,5 VA (probably less than 6 W).
    The prime mover runs another motor of same type which is not loaded. The
    friction of both machines is the only load.

    It was running for half an hour and then stopped, probably the voltage went too
    low, maybe 14 V only, that was too low.
    Imagine how low power it would require if the bearings were ceramic.

    Leave a comment:


  • totoalas
    replied
    DC Magverter

    Hi to All and Peter / Kone
    Thanks for the great thread

    cheers

    totoalas

    ‪DC MAGVERTER 240611.avi‬‏ - YouTube

    Leave a comment:


  • ashtweth
    replied
    TransVerter / Part 1
    ‪TransVerter / Part 1‬‏ - YouTube


    Reproduction of TransVerter anomalous energy amplification as previously done by Dan Combine, Raivo, Jinis and of course Hector D. Perez Torres.

    The power metering of power IN uses specific hardware of the Philips PE1540 power supply. The internal PE1540 shunt resistance is 166mohms = 1/6 ohms so at 30VDC, non-ferroresonance requires 1.5mV hence 1.5*6 = 8.4mA so average Pin = 8.4mA * 30VDC = 0.25W. Once ferroresonance manifest anomalous VAR amplification (VAR = reactive power), PSU provides 2.3mV instead 1.4mV so 2.3/1.4 = 65% increase of power IN to get the ultra-nonlinear parametric effect but generates more than 4 times VAR power still at same 30VDC powersupply (average doubling of reactive current and average doubling of reactive voltage circulating through LC tank as shown on tek2445 oscilloscope).

    Each MWO Panasonic inverter flyback have around 130mH inductance, 4.5ohms internal resistance. The resonant capacitor is 220nF so we have 890Hz subharmonic heterody

    Leave a comment:


  • sciencisto
    replied
    rotoverter on 3.25 W

    I tested shorting capacitors using the Hector's diode plug.
    After that I switched off the thyristors and wanted to for curiosity, how little my 5,5 kW / 400 V, 50 Hz motor can draw and still turn the shaft at its nominal speed.
    And the bearings were still with it's factory grease, not cleaned yet.

    Watch the film, that I just uploaded:
    YouTube - ‪Rotoverter on 3,25 W‬‏

    Leave a comment:


  • gyula
    replied
    Hi Michael,

    I think the best place to ask you questions on rotoverter is a dedicated Yahoo group where Hector and Doug and others surely can address them.

    EVGRAY : zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

    Gyula

    Leave a comment:


  • nilrehob
    replied
    Originally posted by Tomata View Post
    Did you add any setup like an alternator for energy saving/gain ?
    No, time ran out, but I'm hoping to pick it up again next year.
    a)why to insert the rotor to the opposite ?(can be found on page 12. pdf attached )
    I never did that. I find it rather odd.
    b)What is best to use , Prime Mover 3000rpm and Alt 3000rpm or
    PM 3000rpm and Alt 1800rmp ?
    C)Also is a PM 7hp and ALT 7hp better than a PM 7hp and ALT 5hp?
    No idea, i just took what I could get my hands on.

    /Hob

    Leave a comment:


  • Tomata
    replied
    Thank you Hob,i already saw your videos.It was very informative/educational for me to see and read other people videos on RV setup.You did a great job.Did you add any setup like an alternator for energy saving/gain ?

    My questions is asking for a specific information,that is not very clear as to why on documents and replications.

    a)why to insert the rotor to the opposite ?(can be found on page 12. pdf attached )

    b)What is best to use , Prime Mover 3000rpm and Alt 3000rpm or
    PM 3000rpm and Alt 1800rmp ?

    C)Also is a PM 7hp and ALT 7hp better than a PM 7hp and ALT 5hp?


    Michael

    Leave a comment:

Working...
X