Barbosa and Leal Devices - Info and Replication Details

[djarno]

Clarence I've managed to replicate you're effect earlier. (like 6 months ago ?).

Anyways potential in [voltage] -> and amps out (verified with clamp meter on an limited inverter). Only occurred randomly for 3 times for approx 20 seconds so no proof.
Although it was enough to convince me that there is more possible.

Can you update diagram's you currently have in 1 overview able post ?

Personally planning to create tesla coil (on glass) -> spark show -> catch spark show with another tesla coil (on glass) and from there on I don't know exactly.

Though it's logical though, 1 MM == 1000 voltage and you can pull amp's out of the ground. Tesla coil also creates tremendous hertz, reduce it to 60Hz 220 volt somehow.

Ah well whatever, can you please give some updated diagrams and what you're setup currently is ?
Please with pictures, as an picture tells an thousand words.

[clarence]

Dipole question

Now that is what I wanted to hear. I figured it must require
a cap to hit res but needed your validation. Okay now I am
sure.

I have not searched for experiments setup like this but I think
not to many people look at things right. Great progress, keep me
on track. The evolution is coming along fast.

Oh yeah one more thing on how my brain works with the dipole circuit
you have just pointed out. Are you ready?

What about connecting this dipole flux generating portion of
the system to a wire to act as an antenna? and the other end
to a grounding rod? Would that load the dipole? Would an earth
ground and aerial destroy the dipole?

Hello BroMikey,

On the question about the dipole with regard to the wire for antenna and then to ground rod - that
I don't know? have never heard any past conversation on it either.

what was your thinking on that kind of arrangement?
I could try that for you when I get that far - no problem.

ALSO BRO: go to your search engine and type in : Donald L Smith Inventors Weekend 2001 - YouTube
, pull it up and you will have the full video he gives on the exact Dipole setup I mentioned and explains
most everything you want to know about it. do it if I was you!

thanks again,

respects,

Clarence

[BroMikey]

TWO pair of wire ends will not be connected to a DAMN THING AT ALL. (there WILL BE a paralleled capacitance between them to make them resonate same as dipole setup).

Now that is what I wanted to hear. I figured it must require
a cap to hit res but needed your validation. Okay now I am
sure.

I have not searched for experiments setup like this but I think
not to many people look at things right. Great progress, keep me
on track. The evolution is coming along fast.

Oh yeah one more thing on how my brain works with the dipole circuit
you have just pointed out. Are you ready?

What about connecting this dipole flux generating portion of
the system to a wire to act as an antenna? and the other end
to a grounding rod? Would that load the dipole? Would an earth
ground and aerial destroy the dipole?

[clarence]

Digress

Hello BroMikey,

when I last mentioned to you about the method of manually gaping the small TBC coil to control the DC voltage for charging the unit battery in the absence of the Charge/Controller, I noticed a very aggravating condition going on between the TBC coil and the voltage and frequency output of the ZVS driver
and the Tesla Pan Cake Coil. since the TBC coil was a direct load on the TPC and driver EACH time I would change the gap the voltage AND frequency of the
driver output would change also. this just kept me from actually achieving the constant charge to the unit battery that I was after.

to keep ALL of this crap from happening THAT was the point that I knew I finally HAD to go to the DIPOLE set up to get away from it.
the ONLY damn thing I needed for the driver and TPC to give me was JUST its magnetic flux and NOTHING ELSE. this was also the MAIN thing I learned from my DS days. build the dipole but don't KILL it which simply means do not attach a load to its output coil at all.
simply USE ITS FLUX to FLUX another totally separate coil and let IT pickup its OWN energy from the AMBIENT, RADIENT, QUANTUM or whatever the hell you want to call it. THAT is what I am going to do.

I am going to have ANOTHER separate TPC that is NOT connected to anything
at all. its TWO pair of wire ends will not be connected to a DAMN THING AT ALL. (there WILL BE a paralleled capacitance between them to make them resonate same as dipole setup).
the FLUX from this separate TPC coil will in turn flux the small TBC and let it draw its energy from the ambient. NONE of this will load the origin driver and its connected TPC in any way. NONE! NADA!
THEN I can get on with the charge/controller or manual method and have the unit battery at a constant charge/voltage. finally.

I really should have done all of this a long time ago. later better than never.

thanks for listening!

Respects,

Clarence

[clarence]

Dipole

What I can't figure out is if the first coil forms a dipole and the second
coil is a dipole, why doesn't the energy split up? I got to go
back to find the connection diagram. Where does the first untouched
coil dipole wire ends terminate?

Sorry CANGAS go ahead.

Hello BRO,

Answer = between the Driver and the TPC .
also in the DS POC model you can see 3 added coils !
THESE are DUPLICATIONS of the central unloaded coil!
Duplication MEANS NO SPLITTING! AT ALL!

respects,

Clarence

[BroMikey]

.......................

................................... I just SITS there with its TPC spreading a good sized back and forth
MAGNETIC FLUX pattern. as long as the flux is NOT USED DIRECTLY to energize a load such as the present small TBC thats ALL IT WILL DO! just flux back and forth. However using that flux pattern DIRECTLY to energize the TBC KILLS the DIPOLE and MAKES it a LOAD also! NOT GOOD !

To make use of the magnetic flux INDIRECTLY only REQUIRES using an
ADDITIONAL EXACT TPC that is merely in the PRESENCE of the already existing flux pattern AND in RESONANCE with that flux pattern. IT then can energize a TBC as a load that will NOT be reflected back on the original DIPOLE. in effect it becomes a new DIPOLE in itself and gets a FREE
RIDE to power loads by itself.

What I can't figure out is if the first coil forms a dipole and the second
coil is a dipole, why doesn't the energy split up? I got to go
back to find the connection diagram. Where does the first untouched
coil dipole wire ends terminate?

Sorry CANGAS go ahead.

[clarence]

Everworking

Hello CANGAS,

Right on.

while waiting for the replacement Charge/Controller I ordered the necessary
# 6 AWG tinned stranded wire to make a duplicate TPC to establish the DIPOLE set up that I have wanted to do for a long time now. I have only made mention of that fact lightly way back in a previous post.

to explain, the present TPC and its ZVS driver (and 24 vdc power supply) are a DIPOLE. I just SITS there with its TPC spreading a good sized back and forth
MAGNETIC FLUX pattern. as long as the flux is NOT USED DIRECTLY to energize a load such as the present small TBC thats ALL IT WILL DO! just flux back and forth. However using that flux pattern DIRECTLY to energize the TBC KILLS the DIPOLE and MAKES it a LOAD also! NOT GOOD !

To make use of the magnetic flux INDIRECTLY only REQUIRES using an
ADDITIONAL EXACT TPC that is merely in the PRESENCE of the already existing flux pattern AND in RESONANCE with that flux pattern. IT then can energize a TBC as a load that will NOT be reflected back on the original DIPOLE. in effect it becomes a new DIPOLE in itself and gets a FREE
RIDE to power loads by itself. the attachment SHOWS this very well - it
is ONE of D Smiths Proof of Concept models and is worth taking note of.

that's how I am staying busy in the interim.

thanks for listening!

respectfully,

Clarence

[CANGAS]

Jesus said it: (paraphrased due to my imperfect memory) "If the world (meaning Satan's slaves) hates you, count it as blessing. Because it means that you are trying to serve righteousness."

All of my life, but especially during the last 25 years or so when I have been seriously deliberately trying to discover and implement free energy, I have been noticing that the god of Bad Luck has been bending over backward to delay me, thwart, kill me, to prevent me or anyone from giving righteous help to every human in the form of Free Energy. You and many others also are the target of such attacks. When you notice that Satan is shooting Bad Luck Bullets at you it probably means that you are on the right track.

Keep your eyes on the prize and keep on truckin. I kind of maybe pretty much have it covered in terms of mechanical physics because Lord God gave me a kind of simple minded soul that can understand things like a club or a hammer, but can get puzzled by serious electronics. He may want to cover the board by getting people like you to discover solid state methods to capture His free energy and provide it to humanity so that not even one shall perish.

Remember that we have the fallen bastards outnumbered 2 to 1. Our general is The King and their general is a convicted criminal already sentenced to a fiery demise in a lake of burning sulphur.


Very Respectfully
CANGAS

PS I live about several hundred miles north of you near Memphis and it's been raining cats and dogs. I hope and pray that you have been staying dry enough.

[CANGAS]

Hello BroMikey,

was all set to connect the new charge/controller when it came in and did connect it to set the M1 mode operation for a 15 vdc supply with a top amp
of 3.0. but all this was NOT to be!

I didn't know it until I connected the proper regulated dcv supply of 70 vdc that
the unit had been damaged in shipment and it began smoking and burning right away! quick effort to shut it off - but too LATE!

Have gone through all the haggle to get it returned and a replacement on the way.......... but that will just be another long waiting game.(coming from China).

so back to working on the farm and pissed off. OH WELL!

Thanks for listening!

Respects,

Clarence

Jesus said it: (paraphrased due to my imperfect memory) "If the world (meaning Satan's slaves) hates you, count it as blessing. Because it means that you are trying to serve righteousness."

All of my life, but especially during the last 25 years or so when I have been seriously deliberately trying to discover and implement free energy, I have been noticing that the god of Bad Luck has been bending over backward to delay me, thwart, kill me, to prevent me or anyone from giving righteous help to every human in the form of Free Energy. You and many others also are the target of such attacks. When you notice that Satan is shooting Bad Luck Bullets at you it probably means that you are on the right track.

Keep your eyes on the prize and keep on truckin. I kind of maybe pretty much have it covered in terms of mechanical physics because Lord God gave me a kind of simple minded soul that can understand things like a club or a hammer, but can get puzzled by serious electronics. He may want to cover the board by getting people like you to discover solid state methods to capture His free energy and provide it to humanity so that not even one shall perish.

Remember that we have the fallen bastards outnumbered 2 to 1. Our general is The King and their general is a convicted criminal already sentenced to a fiery demise in a lake of burning sulphur.


Very Respectfully
CANGAS

[clarence]

Delay- delay-delay

Hello BroMikey,

was all set to connect the new charge/controller when it came in and did connect it to set the M1 mode operation for a 15 vdc supply with a top amp
of 3.0. but all this was NOT to be!

I didn't know it until I connected the proper regulated dcv supply of 70 vdc that
the unit had been damaged in shipment and it began smoking and burning right away! quick effort to shut it off - but too LATE!

Have gone through all the haggle to get it returned and a replacement on the way.......... but that will just be another long waiting game.(coming from China).

so back to working on the farm and pissed off. OH WELL!

Thanks for listening!

Respects,

Clarence

[clarence]

Slow truckin though

Clarence, every time I read new good news about your work it helps me, it cheers me up.

Keep on truckin.



CANGAS

Hello CANGAS,

I aim to keep on keeping on, just that things move at a slower pace at this present time.
but that's just the reality we all live in.
thanks for the comments.

Respectfully,

Clarence

[CANGAS]

Clarence, every time I read new good news about your work it helps me, it cheers me up.

Keep on truckin.



CANGAS

[BroMikey]

Hello BroMikey,

I really like the way you cover all the in's and out's about the information you pass!

It lets the members easily wrap their noodles around what is being put across!
also points outs advantages and disadvantages when trying to do things!!

NEAT BRO! really neat!
thanks again, as Always!

Respects,

Clarence

Thanks Again Clarence

Look at this latest post from Marc B. on resonant coils like what Don
Smith did as it relates to Tesla's tuning work. I don't know how this
may apply to tuning other coils but it hit home for me.

http://www.energeticforum.com/286021-post10617.html

[clarence]

Good info explanation for all to understand

Hello BroMikey,

I really like the way you cover all the in's and out's about the information you pass!

It lets the members easily wrap their noodles around what is being put across!
also points outs advantages and disadvantages when trying to do things!!

NEAT BRO! really neat!
thanks again, as Always!

Respects,

Clarence

[BroMikey]

Hello Bro,

parts will be ordered 2/17 for the Fast diodes and PWM that we discussed - shipping time ?, who knows !
may post results by 2/24? as always - depends!
will see.

thanks Bro,

Respects,

Clarence

Hello Clarence

I see you are getting it all tuned up and fitted with better diodes.
Nice work, I can't wait to see your progress. That PWM is cool
it is a switch mode device for charging batteries.

The new battery charger and charge controllers for solar are
everywhere, glad you could find and off the shelf unit that
saves on power for zapping your batteries.

Those new off the shelf chargers for charging batteries will
step down the voltage a little so you can keep a happy battery.
This is called a "BUCK CONVERTER". All your solar panels
put out only 17vdc and you put two of them in series that would
be 34vdc but on a cloudy day it might not put out enough so
converters save the day.

I know you are not using solar panels or scooter parts but if
people want to find these converter they can do a search
in the solar stuff called "CHARGE CONTROLLER" this will get
you to where you want. Or you could search for scooter
converters and there you will find battery charging converters
that don't work off the AC grid tie.

So while I know you are not connecting any solar panels up
to your rig if people want to replicate what is coming, they
can search in solar battery chargers or controllers.

I knew these modules were there but could not find them
every time I went to look because I didn't use the right
search terms.

"DC to DC" step down converters" let you take DC voltage
like 80vdc and send it down lower without wasting. Another
important detail for buying converter or inverter modules is that
after you find where they are, make sure you buy one big enough
so that you only use 30-40 percent of the chargers MAX
capacity, this will give you the greatest efficiency conversion
factor. Not to mention longevity.

I hope this disspells any confusion about the notion that Clarence
has now hooked up solar panels to his rig. He has not, I just
wanted everyone to know that many of our science projects need
circuits to help with juggling energy and the section on solar
at the EBAY stores carry these converters.

In your case you are not using this converter for the sun, rather
to converter some power off your unit sending it to this
converter to charge batteries.


You say the TBC puts out 41vac then you will rectify to dc
sending that to your "DC to DC" charge controller? That sounds
like a perfect fix.

This is a good advancement and everyone who is building
these can easily replicate.