Barbosa and Leal Devices - Info and Replication Details

[BroMikey]

TWO pair of wire ends will not be connected to a DAMN THING AT ALL. (there WILL BE a paralleled capacitance between them to make them resonate same as dipole setup).

Now that is what I wanted to hear. I figured it must require
a cap to hit res but needed your validation. Okay now I am
sure.

I have not searched for experiments setup like this but I think
not to many people look at things right. Great progress, keep me
on track. The evolution is coming along fast.

Oh yeah one more thing on how my brain works with the dipole circuit
you have just pointed out. Are you ready?

What about connecting this dipole flux generating portion of
the system to a wire to act as an antenna? and the other end
to a grounding rod? Would that load the dipole? Would an earth
ground and aerial destroy the dipole?

[clarence]

Dipole question

Now that is what I wanted to hear. I figured it must require
a cap to hit res but needed your validation. Okay now I am
sure.

I have not searched for experiments setup like this but I think
not to many people look at things right. Great progress, keep me
on track. The evolution is coming along fast.

Oh yeah one more thing on how my brain works with the dipole circuit
you have just pointed out. Are you ready?

What about connecting this dipole flux generating portion of
the system to a wire to act as an antenna? and the other end
to a grounding rod? Would that load the dipole? Would an earth
ground and aerial destroy the dipole?

Hello BroMikey,

On the question about the dipole with regard to the wire for antenna and then to ground rod - that
I don't know? have never heard any past conversation on it either.

what was your thinking on that kind of arrangement?
I could try that for you when I get that far - no problem.

ALSO BRO: go to your search engine and type in : Donald L Smith Inventors Weekend 2001 - YouTube
, pull it up and you will have the full video he gives on the exact Dipole setup I mentioned and explains
most everything you want to know about it. do it if I was you!

thanks again,

respects,

Clarence

[djarno]

Clarence I've managed to replicate you're effect earlier. (like 6 months ago ?).

Anyways potential in [voltage] -> and amps out (verified with clamp meter on an limited inverter). Only occurred randomly for 3 times for approx 20 seconds so no proof.
Although it was enough to convince me that there is more possible.

Can you update diagram's you currently have in 1 overview able post ?

Personally planning to create tesla coil (on glass) -> spark show -> catch spark show with another tesla coil (on glass) and from there on I don't know exactly.

Though it's logical though, 1 MM == 1000 voltage and you can pull amp's out of the ground. Tesla coil also creates tremendous hertz, reduce it to 60Hz 220 volt somehow.

Ah well whatever, can you please give some updated diagrams and what you're setup currently is ?
Please with pictures, as an picture tells an thousand words.

[BroMikey]

Hello BroMikey,

On the question about the dipole with regard to the wire for antenna and then to ground rod - that
I don't know? have never heard any past conversation on it either.

what was your thinking on that kind of arrangement?
I could try that for you when I get that far - no problem.

Well I just wanted to know what you thought might happen
since you have injected energy into the ground before.

Also this is a Tesla invention right? Tesla would set up a HV
dipole and tho is wan't powering anything till running that thr
a conversion stage or two

I FIGURED THIS MIGHT BE WHERE EXTRA ENERGY IS DRAWN IN?

Just a thought.


I did that with my SSSG bedini OSCILLATORS and I got more
out.

[Why-me]

Hello Clarence, just a thought, could the battery be replaced with a truck capacitor that has a 16 volt rating? The starting capacitor that the truck lines are using instead of batteries?

[clarence]

BATTERY or CAPACITOR BATTERY

Hello Clarence, just a thought, could the battery be replaced with a truck capacitor that has a 16 volt rating? The starting capacitor that the truck lines are using instead of batteries?

Hello Why-me,

Don't know about the Cap battery. never have looked into it.
the whole problem in not whether it's battery or cap battery,
BOTH would require a good method of constant charge to prevent draw down.
THATS the problem that is being worked out here.
glad to see you jumped in anyway!

Respectfully,

Clarence

[Why-me]

Here is the link to the truck capacitors. Maxwell Technologies Engine Starting Module
Or Maxwell Technologies 16 Volt Large Modules Ultracapacitors General Purpose Modules

[clarence]

Only photos later

Clarence I've managed to replicate you're effect earlier. (like 6 months ago ?).

Anyways potential in [voltage] -> and amps out (verified with clamp meter on an limited inverter). Only occurred randomly for 3 times for approx 20 seconds so no proof.
Although it was enough to convince me that there is more possible.

Can you update diagram's you currently have in 1 overview able post ?

Personally planning to create tesla coil (on glass) -> spark show -> catch spark show with another tesla coil (on glass) and from there on I don't know exactly.

Though it's logical though, 1 MM == 1000 voltage and you can pull amp's out of the ground. Tesla coil also creates tremendous hertz, reduce it to 60Hz 220 volt somehow.

Ah well whatever, can you please give some updated diagrams and what you're setup currently is ?
Please with pictures, as an picture tells an thousand words.

djarno,

Did not see your post until this morning.
I have said many times I do not do diagrams.
I only show photo updates - the next will be AFTER I have made my new
#6AWG Dipole reciever/transmitter coil to energize a Tesla Bifilar Coil
(TBC) from the AMBIENT (air, surrounding environment, RADIENT BACKGROUND - whatever you want to call it - ALL the same thing) source and use that volt/amps to put through a new Full Wave Bridge Rectifier to get DC voltage to put through a Charge/Controller and supply CONSTANT
voltage to my battery system without draw down from the Captor or the inverter.

You are mistaken, amperage does not come from the ground! voltage only.
the amperage comes by means of the CAPTOR LOOP with the neutral return
wire wrapped 2 1/2 turns around the Captor loop and THEN fed on to use
for electrical supply purposes. if you do it any other way you might as well find a DARK closet- go inside - close the door - and stay there forever by yourself so you don't pollute the rest of the community!

also sounds like you have a way to small inverter for what you are trying to do!
Also a tesla coil does not create HERTZ big or small.
whatever the frequency of the device used to DRIVE the tesla coil SETS the
frequency of the TC! once set you have to live with it!!!!! you can try to change the frequency with proper parallel capacitors but THAT changes the frequency of the DRIVER at the SAME TIME! then all hell brakes loose and
the volt/amps that you strived to get goes to hell in a hand basket.

The moral of the story IS: if you don't know what you are doing - DON'T!

Respects,

Clarence

[Why-me]

quote
Personally planning to create tesla coil (on glass) -> spark show -> catch spark show with another tesla coil (on glass) and from there on I don't know exactly. End quote

If you use glass then prepare for breakage. If you leave glass in sunlight, it will completely break down into very small pieces once you crack it. Heat cracks glass.
Try a pvc pipe. Not pretty but insulates and less brittle.
Okay, at little off topic. Sorry Clarence.
I want to learn all the Tesla technology I can before the Internet disappears.

[djarno]

quote
Personally planning to create tesla coil (on glass) -> spark show -> catch spark show with another tesla coil (on glass) and from there on I don't know exactly. End quote

If you use glass then prepare for breakage. If you leave glass in sunlight, it will completely break down into very small pieces once you crack it. Heat cracks glass.
Try a pvc pipe. Not pretty but insulates and less brittle.
Okay, at little off topic. Sorry Clarence.
I want to learn all the Tesla technology I can before the Internet disappears.

Will be heavy epoxy coating so doesn't matter if it breaks.

[BroMikey]

Hi Clarence

Someone asked me a question about making TBC wire.
here it is.


Hello BroMikey, Can you help me , where do you buy your
wire for the coils at good price?
Do you have Know how many feet it is necessary for the TPC both
of them? Looks like clarence have me hooked whit the idea of TPC
not connected to anything and have a dipole and not killing it. wish
you the best, love your post, hope somethings come out soon.

[fer123]

Hello BroMikey. I did It, I thing maybe you know better place to buy some materials, anyway, I try to make different coils for the TPC with the end not connected and not luck, Mr Clarence if he show the picture how to do It will be a gool, is not to easy, I try to use calculator to do It but nothing for the moment the consume from the ZVS It go way to high, I will try to do my best. Thanks and good luck.

[clarence]

New coil progress

Hi Clarence

Someone asked me a question about making TBC wire.
here it is.


Hello BroMikey, Can you help me , where do you buy your
wire for the coils at good price?
Do you have Know how many feet it is necessary for the TPC both
of them? Looks like clarence have me hooked whit the idea of TPC
not connected to anything and have a dipole and not killing it. wish
you the best, love your post, hope somethings come out soon.

Hello BroMikey,

missed that I guess? The new and old TPC coil takes 25 feet of black and 25 feet of red # 6 AWG tinned stranded battey cable. I get mine on line at
Pacer Group - Marine Wire, Battery Cable and Electrical Parts. pull it up on your search and you can navigate around their site until you get used to it and then go to the section on battery cable
and check it out. not really hard to get used to their system. they ship and charge for shipping. most all places do!
Also the Red and Black #10 AWG Parallel wire that you see in the attached photo I use for all the TBC coils comes from E-Bay.Com. I order that from them and also the Hyperbond SuperGlue Medium Flex too!

I don't give out info on numbers of turns and such - up to everybody to use their eyes and count. the photos are quite clear! you will need a lot of super glue as you go. make a few turns and keep it tight and weighted down and NO gaps between turns before you spread super glue between wires. then let dry and get after it again till through.

It IS a real pisser to get it complete for sure! like breathing, just keep doing it! I showed a photo of the type of jig I made for flat coil winding awhile back. I works damn good too!

I put the finishing touches on my added Dipole TPC this afternoon. will take another day or two to finish for install and then run for a good while for results.

all for now.

respects,

Clarence

[CANGAS]

Clarence, again I am your cheerleader.

My specialty is mechanical physical devices and I know just about beans about electronics, but again I cheer you as you work toward your free energy goal.

And I again pray that Lord God blesses you in your good righteous work to help humanity get out of the prison made by poverty due to the lack of cheap, or, free, energy.

Amen


CANGAS

[clarence]

Amen

Clarence, again I am your cheerleader.

My specialty is mechanical physical devices and I know just about beans about electronics, but again I cheer you as you work toward your free energy goal.

And I again pray that Lord God blesses you in your good righteous work to help humanity get out of the prison made by poverty due to the lack of cheap, or, free, energy.

Amen


CANGAS

Hello CANGAS,

AMEN is the correct word for certain.
thanks for support also!

Respectfully,

Clarence