Hi,
I will try it and see if i can get any extra from the ground rods!
Thanks BroMikey
Best Regards
luc2010
Announcement
Collapse
No announcement yet.
Barbosa and Leal Devices - Info and Replication Details
Collapse
X
-
Input and output
Originally posted by clarence View PostHello mobigozer,
the direction is irrelevant.
however the connection method is relevant as was indicated by B&L.
attached is a picture of how they proposed to do so and which I did.
respects
Clarence
Are B & L correct in that drawing? The input and output are connected to the looped series of rods? Your drawing showed the input rods in the center, separate from the output rods. Is not the idea to input energy into the earth with separate rods, then collect return energy from the earth with multiple output rods?
Maybe my eyes are bad.
@Mobigozer,
I have experimented with north-south or east-west placement of rods to get more out of planet earth. I drove an 8 foot 1/2" copper pipe into the ground north. Then 15 to 20 feet west used a landscaping galvanized nail in the ground. Connected meter leads to both rods, moved the west nail a little north or south to find the sweet spot in the geomagnetic flow. Where I live I get .8 volts dc reading between the two if aligned true east-west.
Just I know the earth ground has potential power.
Just knowledge to encourage,
wantomake
Leave a comment:
-
Originally posted by mobigozer View PostHi Clarence,
Respects Sir for your continuous effort to educate people on smart inventions :
Q: on the orientation of the ground rods. Is it relevant if they are placed specificly in a north-south direction, or 90 degrees turned so west-east (east-west if you like that more)? Because of the magnetic field of the earth? Or is that not relevant?
Thank you,
Hans
the direction is irrelevant.
however the connection method is relevant as was indicated by B&L.
attached is a picture of how they proposed to do so and which I did.
respects
ClarenceLast edited by clarence; 03-26-2016, 04:12 PM.
Leave a comment:
-
Orientation of ground rods
Originally posted by clarence View PostHello wantomake,
Clarence here - GLAD to hear of your success with the rewind Sir!
I definitely can understand your time availability to get all the things done that are the important priorities. I have been so busy with all of life's everyday NECESSARY- have to do events- I meet myself coming and going! eventually it somehow all gets done though. LOL on all of your family events for certain!
Contrary to most members thoughts that the thread is at an end it is actually drawing closer to a high point of achievement that all other threads would give a left one for!
the alternate energy which will be processed THROUGH the captor system is a TESLA invention which has a COP of 3.88 . it's basically nothing new as I have seen MANY playing around with it. however as far as I can tell NONE of them has made an attempt or come up with a method to actually make use of his invention. WELL THAT PARTY IS OVER !
I do know how to connect all the dots and have damn well been busy doing just that! I am well along with efforts - it has taken more time than I first anticipated but that is NOT a bother to me!
so for all you fear monger members take a deep breath and pull up your drawers and hang on for awhile.
Better yet- as wantomake indicated - GET BUSY DOING SOMETHING YOURSELF!
Respects,
Clarence
Respects Sir for your continuous effort to educate people on smart inventions :
Q: on the orientation of the ground rods. Is it relevant if they are placed specificly in a north-south direction, or 90 degrees turned so west-east (east-west if you like that more)? Because of the magnetic field of the earth? Or is that not relevant?
Thank you,
Hans
Leave a comment:
-
Back to school, no stool pigeons please.
Why am I always the one to have to educate people who
are willingly blind,deaf and dumb? Why is that?
Oh well it works out in the end to benefit the true researcher.
https://en.wikipedia.org/wiki/Rock_magnetism
[VIDEO]https://www.youtube.com/watch?v=gY18yt0ZzM8[/VIDEO]
Here we can see that a tiny section a granite or rock material
holds electrons.Custodial engineering HEY??? Don't quit yer day job
[VIDEO]https://www.youtube.com/watch?v=vUO5660U3lY[/VIDEO]
Even a midget like me can ruin the programmed dogma in a couple vid's.Last edited by BroMikey; 08-08-2015, 09:41 PM.
Leave a comment:
-
You only have to post 1,000 times to be a gold member. But of course as you can see none of the posts have to make any sense.
Leave a comment:
-
Originally posted by tvka View Post"Earth is a huge magnetic rock" So ignorant- no comment
"Understand what Tarial Kapman"- Kapanadze- for dumb americans- Kapanadze is bull****
Just wonder how many comments one has to apply to become a "gold member"
Just keep pumping out zeros and ones.
If you boys want to discredit the experiment then show that
you have driven the rods in proper or go find a site for gaming.
You have not made any sense. Try making some or do your gang
stalking else where.
Leave a comment:
-
Originally posted by BroMikey View Post
My perception of injecting 120vac or 240vac into the ground goes like this.
A beginners look that probably needs help adding other processes in.
(1) The Captor transformers set the tone or frequency (60HZ) being
connected directly through the voltage headed south to the ground.
(2) The voltage is now regulated to 60hz which will be collected
for use and is an important requirement. Who wants power they
can't use?
(3) The battery sends a tiny amount of DC to the inverter that in
turn sends a trickle of (in my case)120vac to the grounding rods.
These rods are now activated with a tiny portion of energy that will
be needed to power the loads. The rods are energized and waiting.
The earth is a huge magnetic rock
(4) The earth is a huge magnetic rock so when I inject 120vac that
is made to jump from one rod to the next and so on using 60 rods 10
feet long, the rods will pick up EXTRA.
So the captor collects energy that is usable because that is what it
is told to do.
Sure Tesla collected energy by earth grounding plates and rods
as well as connected antennas to produce a potential difference
but this form of energy, however great could not be used to power
devices designed at 60hz, 120vac.
This device is a step up innovation from the 1890's.
Understand what Tarial Kapman is doing when he goes way out
into a remote region where no power lines exist for 40 miles
and gets the same results.
"Understand what Tarial Kapman"- Kapanadze- for dumb americans- Kapanadze is bull****
Just wonder how many comments one has to apply to become a "gold member"
Leave a comment:
-
Originally posted by luc2010 View PostHi BroMikey,
Please,
the hot wire is connected directly to earth ground rods?
Can you explain this a bit??
Thanks
Best Regards
luc2010
My perception of injecting 120vac or 240vac into the ground goes like this.
A beginners look that probably needs help adding other processes in.
(1) The Captor transformers set the tone or frequency (60HZ) being
connected directly through the voltage headed south to the ground.
(2) The voltage is now regulated to 60hz which will be collected
for use and is an important requirement. Who wants power they
can't use?
(3) The battery sends a tiny amount of DC to the inverter that in
turn sends a trickle of (in my case)120vac to the grounding rods.
These rods are now activated with a tiny portion of energy that will
be needed to power the loads. The rods are energized and waiting.
(4) The earth is a huge magnetic rock so when I inject 120vac that
is made to jump from one rod to the next and so on using 60 rods 10
feet long, the rods will pick up EXTRA.
So the captor collects energy that is usable because that is what it
is told to do.
Sure Tesla collected energy by earth grounding plates and rods
as well as connected antennas to produce a potential difference
but this form of energy, however great could not be used to power
devices designed at 60hz, 120vac.
This device is a step up innovation from the 1890's.
Understand what Tarial Kapman is doing when he goes way out
into a remote region where no power lines exist for 40 miles
and gets the same results.
Last edited by BroMikey; 08-08-2015, 06:15 PM.
Leave a comment:
-
Originally posted by totoalas View PostYuri L from OU has a 2nd single primary shorted loop connected to the phase or LIVE 500 t primary 0.6 dia and sec 450 t 1 mm dia
Can somebody invite him here
he has a yt video of his set up without earth ground
Nicely summing up- 49W on primary. No overunity.
No wonder.
Leave a comment:
-
barbosa and leal
hello Clarence...i have being following your posts and it is nice you sharing your experience with the forum, please i want to ask you this , what is the amount of excess energy have you gotten from the device so far,? and what determines the sizing of the device? is it the bigger the toroid the bigger the power output or the bigger the grounding the bigger the output? thanks
Leave a comment:
-
Originally posted by totoalas View Post
sometime when he can. Oh and that I liked his video
but didn't understand the words.
Leave a comment:
-
Originally posted by BroMikey View PostMe no speaky Russian
Yeah I wish he could talk to us in English.
e-mail: graviton_kiev@meta.uaLast edited by totoalas; 08-06-2015, 11:33 PM.
Leave a comment:
-
Originally posted by totoalas View Post
Yeah I wish he could talk to us in English.
Leave a comment:
Leave a comment: