Newman Motor Finally Explained?

[alexelectric]

I know that the Joseph Newman engine was analyzed and well commented by several users of this forum, and thanks to them we have details of the Newman engine

But I wonder what happened to these researchers who studied and analyzed know about it.
I'll put them if someone can tell if they changed their name

vidbid

Duncan

clarence

Faraday88

I hope you are well and regards

[alexelectric]

image_24323.gif
Does anyone know how many amps this Newman motor consumes at 2000 volts that it can be seen applying to it, and how many hp it generates.

if anyone knows the data please comment

[alexelectric]

picking up the comments
Has anyone continued with the construction of a Newman engine and can mention their results.
Newman's work is interesting
And there are elements that allow better performance to be obtained in Joseph Newman's proposal,
how is he;
the magnetic field
The magnets
the amount of copper
the current

now I ask can I make an engine like some of Joseph Newman's engine proposals
where I used 1 ampere in the coil and get a given power, and then get twice the power at the output and continue using the same amperage 1 amp

[Energy Hack]

Hey Alex,

You're right.. His later models used capacitors and no shorting of the circuit.. If you watch the 2017 Geoff Miller presentation on Newman motors (ETSC) he explains the same. The coil reverses polarity each 1/2 turn and the capacitor catches the back EMF spike on circuit opening. Also, check the drawing I posted on 7/23/21 - it depicts this commutator design.

I see it as four phases of rotation; first 1/4 turn connect coil forward, 2nd quarter turn coil is OFF, 3rd quarter turn coil is connected reverse, 4th quarter coil is off. Capacitor must be an AC capacitor.

I wrapped a 26k turn coil the other day of AWG 30 (1262 Ohms and 22 Henrys) to see how it performed on a pulse motor. I had to give it about 90 volts DC to get good rotation. It seems to act sluggish and could only get about 2.5 watts into it.. but a similar coil with 1000 turns of AWG 18 or 20, 12v will spin the rotor similar speed but at 5Watts input. So I could see the more copper the more efficient the motor becomes.

This made sense to me when I thought about Equations for Magnetic Field Strength, Ohms law, and Power. (forgive me if this is an elementary EE understanding...I'm not an EE)

B~ (I x N).... If I double the Coil turns the current will go down by 1/2; it's a onene relationship
P~ (I^2 x R)... As I increase the turns the reduction in Current is a squared relationship to Resistance and Power.. so there should be an exponential power efficiency improvement with reduced current...

Example.. I have a hypothetical Coil with 2 Amps Current, 10 Ohms Resistance... P = 40 watts ((2 Amps^2)*10 Ohms)

Now I double the Coil turns, the current gets cut in half, and the Resistance Doubles.. should be same magnetic Field Strength since B ~ I x N (assuming coil radius average doesn't change significantly)

P = 1 x 20 ((1Amp^2)x(20 Ohms)) = 20 Watts... So double the coil size takes 1/2 the power for same Magnetic field strength... or even if my assumptions are off, say it's 25 or 30 watts.. it will be more efficient than first example...

Newman took this to the extreme and had coils in the hundred pounds range and then pumped 1000-2000 volts into them.. The shaft torque produced was able to mechanically power a generator for over unity or a gen coil was wrapped around the drive coils for same purpose..

I believe why his technology did not take off is because so much copper is expensive; 200# x $120/lb = $2.4k for maybe 50 watts production..(I have no idea but it wasn't 10kW or we'd have them on the market today)...

Nonetheless, if there is anyone out there who has built a LARGE Newman motor - I'd love to hear the performance data on it.

Thx

[alexelectric]

If so, to have something Newman tells us, you need a lot of copper, and little current.

But it is good to make replicas, it is understood what Joseph Newman wanted to tell us or try.
There are very good projects from many users.

In a part of this forum it is said that he shorted the back fem, but if you watch the videos, he has large capacitors where it seems that he was capturing the recoil.
Let's keep commenting and studying

[Energy Hack]

I would like to know if anyone else out there has successfully replicated Newman's 200# coil motor. Mr. Geoffrey Miller of Energy Bat labs has constructed several large Newman motors but he does not openly share any of the performance data. This design was released in one of the last editions of Newman's book. It costs about $10,000 to replicate in today's prices. All the Newman motors that I see online are small versions with less than 20lbs of wire. Newman vehemently states that a lot of copper is necessary to achieve the OU effect.

[alexelectric]

https://www.youtube.com/watch?v=wGi2kvZH46Y

The work of this researcher was on the right track, but he gave data on his results, a pity that he could not continue, there was much speculation in the comments because he concluded his research.

But there we have his videos and his data, and that allows us to study his progress or challenges to face, all the replicas of the projects guide us and help us advance in replicating and improving them.

I would like to know if BroMikey, did you make a replica of the newton engine and your results, I ask you why you are a very enthusiastic experimenter and researcher

[alexelectric]

Newman Motor Powering A Generator

https://www.youtube.com/watch?v=5EL_bLOK8_A

https://www.youtube.com/watch?v=5EL_bLOK8_A

Interesting..

If it is very interesting, to see the big big, coupled to a generator, and thus have energy, the great torque of the newman machine powered by only the small batteries, and very low consumption, then where do you get that great torque of the machine , if it only consumes a few milliamps.

For those who have studied Newman's device for many years, there is an explanation of the large magnetic field that was obtained from the amount of wire in the coil and its thickness, more mass, more electrons, and it only occupied a small current To generate a large magnetic field and together with the rotor magnets, when the shaft was rotated, this large torque was obtained, as clear and simple as that.

And if very interesting that as you comment vidbid

That for many continue to investigate and build their replicas in a simpler way, it is difficult to build Newman's big, but it serves as an example of what can be achieved.

[vidbid]

The NEWMAN Commutator



The above is the NEWMAN motor commutator.

This is an important design issue, which isn't widely known about.

[vidbid]

Joe Gets Violent

[VIDEO]https://www.youtube.com/watch?v=KJw_Eus1WzY[/VIDEO]

https://www.youtube.com/watch?v=KJw_Eus1WzY

Joseph Newman Boxer Video

Joe's the man. He's not about to take any sh*t off a hippy, dirtbag-looking physicist.

LMAO

[Gambeir]

Hmm...well let me try adding this on. See, materials matter because it is the geometry of the crystalline shapes that decide what energies do and how any energies we add to those crystalline shapes interact with the so-called quantum field/Aether/Counter-Space.

What is implied in the qualities of graphite is that there are energies passing through it, and the evidence for that is that when layers of graphite are connected you have a different outcome; in this case a magnetic field. This seems to point to a concept first forwarded to me by Bugfly in PM's on the ARV, and that is the magnetic field is possibly akin to a hologram, that is it is everywhere and yet no where because it has the evident potential to be anywhere. It only manifest's itself when it can be translated to a 3D form is what seems to be taking place. The engine that translates this energy in to a 3D form is the arrangement of crystalline formations. That's what the actual natural physical evidence is telling me.

In graphite it seems that the magnetic field is like a hologram because it seems to be two dimensional until there are links made between the graphite layers. I don't how how else to explain the behavior of the material other than by this means. For inside the layers lies magnetism, yet it is a diamagnetic material which is repelled by magnetism. That's what the science article previously posted says if I understand it correctly. Maybe I'm missing something and showing my vast ignorance but this is what I'm gathering. Now I don't know if any of this helps, probably not, so I will probably just try to shut the ----up but probably won't be able to do that. Like for example ask yourselves this; light+form=what? Which begs the obvious question of can you make a magnetic field out of light I suppose.

[Gambeir]

How to make this post without once more seeming to be off in wilds tripping on schroom's? As for the supposed transmutation video it would really take a lot more serious study to show one way or the other. These simplified tests he's doing aren't conclusive. They are supportive but not conclusive evidence of any transmutation.

Now oddly I happened upon this old thread on Energetic Forums just yesterday and may be somewhat useful or refreshing. I think post #8 by Dr. Poppy and a couple others might be useful as there's the same issues of transmuation and magnetization.
http://www.energeticforum.com/water-...netic-gas.html

Now specifically I was looking for information on creating a magnetically reactive gas, and that's what lead me the Newman Motor Finally Explained Thread in the first place because of the post linking the ability of helium to become magnetic. Now I'm looking to enhance this or to simplify with other materials.

So in regards to the video, we have to consider specifically graphite, because graphite is normally repelled by the magnetic field, so it's diamagnetic. At least that's the conventional party line presentation.

A secondary is quite the opposite. That in fact graphite is magnetic and is a permanent magnet at room temperature.
https://physicsworld.com/a/physicist...tes-magnetism/

How is this possible because graphite such as pencil lead acts or responds as though it's diamagnetic. Lead/graphite is repelled by another magnetic field. However, if I understand this science article correctly, what they say is that the layered carbon sheets of graphite do have magnetism. However, and pay attention here, they also say this magnetism is formed by defect regions between the layers of graphite. Notice they use carbon and graphite interchangeably which isn't precisely quite right and could lead to some misunderstandings. Always keep graphite apart from carbon in your own mind so as to avoid confusion. Graphite is not carbon any more than a lump of coal is a diamond, it's just made from carbon atoms, but it is arranged differently in layers whereas carbon is generally not. This results is significantly different outcomes. This is another clue that the geometry of shapes in matter has profound outcomes and supports the notion that energies unknown flow through the crystalline geometry of matter.

According to this science article when graphite layers are connected via defects is where magnetism appears. See how that's significant? Otherwise it has no magnetism, not really, so the conclusion that it is magnetic really isn't exactly accurate. Rather it has the potential to be magnetic and sometimes it can be magnetic. However, and somehow, graphite is primarily diamagnetic and will levitate over a magnetic field.

Evidently, the application of a current is creating aligned/coherent magnetic dipoles which then form and are ejected because the native state of matter is incoherent magnetism. That would be my speculation given the evidence.

[vidbid]

Carbon to Iron Fusion

I'm not sure why your post is here, or what is has to do with Joseph Newman's energy machine.

I believe Newman used carbon contacts on his motor.

Hello I don't know if this is resolved yet, but here's my two cents then I'll leave.

The video of the carbon to iron energy source he said he reached 175% on the second level, but on his website he gives a longer version of his testing, and he hit over 1000% on one run with a different configuration.

He says this is A fusion process, but on his site he's working it as a VSG or called synergistic generation process that flips carbon isotopes into boron then they fall back to carbon giving off beta radiation as cold energy.

And in his tests I saw no alignment magnets which are needed to give polarity to the beta energy, so what's up here? I don't know for sure, but for further information go to Rex's site and look up the file on VSG.

He has a lot of go information on it but not all.. There like five other elements that have isotopes that to this and some a lot better than carbon.

Imagine this is an isotope of carbon like 1 in 100,000 atoms in carbon can do this, so when they can purify it, well look out.

And another thing the carbon never wears out. This was seen at CERN in France but withheld from the public.

I don't know why were getting two stories here?

Jim,

Probably the usual suspects in the line up .

Please forgive the edit.

I'm just trying to figure out what you're talking about.

Is this carbon to iron fusion?

I found something on it.

[VIDEO]https://www.youtube.com/watch?v=0KV8hz5Ubfc[/VIDEO]

https://www.youtube.com/watch?v=0KV8hz5Ubfc

Cold Fusion at home - fusing carbon and oxygen to make iron - YouTube

[VIDEO]https://www.youtube.com/watch?v=fg4vcwRaN30[/VIDEO]

https://www.youtube.com/watch?v=fg4vcwRaN30

Carbon to iron fusion take 2 - YouTube

[vidbid]

Us6960975

Except for the part about the use of Helium, I would say your post is off-topic, but I think it's okay if you keep it here.

Hope this isn't too out of place. I can remove it obviously if you think so. However this image I managed to recover some time back when Boris Volfson caused a stir over his antigravity patent. Since that time this image, a readable image, has seemingly been scrubbed. Tin Eye cannot find one and I've searched, which I'm pretty good at most times, and I cannot locate another. I've reposted this image. You may want to consider downloading it for safe keeping.

In the ARV Inquiry Thread E.T. Power posted a video where Newman talks about wrapping coils of wire around a helium balloon and once more using a series of 9 volt batteries which would control the balloon. http://www.energeticforum.com/renewa...vehicle-4.html

Anyways take a look at this image. Helium is undoubtedly important.

The journal Nature said patent 6,960,975 was
granted Nov. 1 to Boris Volfson of Huntington, Ind.,
for a space vehicle propelled by a superconducting
shield that alters the curvature of space-time
outside the craft in a way that counteracts gravity.

*Note the patent does not show this image.

Here's that patent application: https://patentimages.storage.googlea.../US6960975.pdf

I went and looked for an anti-gravity thread and couldn't find one, so I made one, which is now at http://www.energeticforum.com/renewa...i-gravity.html

Please move discussion about anti-gravity to that thread. Newman's technology was primarily about free energy.

[vidbid]

Newman Movie

[VIDEO]https://www.youtube.com/watch?v=CrJIzrmX1mI[/VIDEO]

https://www.youtube.com/watch?v=CrJIzrmX1mI

Joseph Newman - YouTube

Newman Movie