Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube 2019 ENERGY CONFERENCE - ONLY 150 118 99 71 63 46 SEATS AVAILABLE!

2019 Energy Science & Technology Conference
ONLY 150 118 99 71 63 46 SEATS AVAILABLE - LIMITED SEATING
Get your tickets now: http://energyscienceconference.com


Go Back   Energetic Forum > > >
   

Eric Dollard Official Forum This forum is dedicated to the work of Eric P. Dollard. His Official homepage is http://ericpdollard.com

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX

Closed Thread
 
Thread Tools
  #721  
Old 12-22-2011, 04:57 AM
dR-Green's Avatar
dR-Green dR-Green is offline
Gold Member
 
Join Date: Apr 2008
Location: Wales, UK
Posts: 1,557
Quote:
Originally Posted by Aether View Post
but nobody is going to build a TMT immediately, it's just not going to happen.
I don't claim to understand the maths or even what's really going on, but I really don't see what the huge difficulty is in just building something that will work Eric's video from 1988 or whatever clearly shows how to build a basic working model to begin experimenting with. A lot is revealed just by doing that. Then just recently, in fact in the TMT thread that Eric doesn't like and elsewhere on this forum, information has been shared regarding the construction based on Eric's information and Tesla's own words, so frankly there is enough information already available to at least build a small scale model that is almost guaranteed to work to a certain degree. A 51 metre diameter TMT or full scale Wardenclyffe tower would not happen immediately I agree. But the point is that Tesla had less information when he started than we have here, and he could figure things out and tweak things through the whole process of developing it, starting small and having things reveal themselves I would imagine. So just by using the available information anyone can get started, and one can't really NOT learn something from it, and develop one's own understanding "naturally". And there's so little wire in reconstructing something like Eric's small flat spiral coils it's not even expensive to find out these things and get started. Much cheaper than a lot of the other projects that are going on here. I don't see why it's necessary to fully understand all the maths just to be able to build something that works.
__________________
http://www.teslascientific.com/

"Knowledge is cosmic. It does not evolve or unfold in man. Man unfolds to an awareness of it. He gradually discovers it." - Walter Russell

"Once men died for Truth, but now Truth dies at the hands of men." - Manly P. Hall

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #722  
Old 12-22-2011, 06:27 AM
Aether's Avatar
Aether Aether is offline
Member
 
Join Date: Aug 2010
Posts: 36
Yea, sorry I was just speaking for myself. I am confident that people here will replicate Tesla's work accurately and observe effects as noted by Tesla and Eric Dollard. Eric's information has been really really helpful his videos that I saw a few years ago really focused me on what I should be researching in terms of my own interests, and I plan on replicating the TMT myself once I have the funds to do so. Understanding the math, I think, is essential to properly understand what it is you are doing and to have an accurate explanation quantifying the forces being manipulated, and I think this is Eric's point? I am a student in school right now learning Electrical Engineering so I have also had a difficult time purging my mind of the status quo concepts of Electricity. Eric's writings and pretty much this whole thread has really helped me, I now have a vast collection of books that I can read thanks to this thread(currently reading Goethes Theory of Colours). I can't wait to see what Eric's new transmissions about the TMT and I hope he has a change of mind and continues to spread his knowledge, either way I am thankful.
__________________
 
  #723  
Old 12-22-2011, 06:31 AM
Farmhand Farmhand is offline
Platinum Member
 
Join Date: Jun 2010
Location: Australia
Posts: 3,389
Hi Kokomoj0

Quote:
at 5/9 and change
I don't know what that means.

Quote:
Originally Posted by Kokomoj0 View Post
well I would have to listen to the video again but Eric in his Sbarc lecture I believe used roughly 100 watts to transmit from LA to I think San Francisco at 5/9 and change. I would think that would transfer power equally well if there was a LMD receiver there even though its maybe 300-400 miles between them. You wont transmit on that low power that distance with any other method that I know of. Pay particular attention to what he said about winding the coil, and the ground required!
Anyway I am watching the video now, I've watched that one before and I
must say that it is making a lot more sense to me now than it did when I first
watched it (before I started experimenting) it's my opinion there is a lot to be
gained by actually doing stuff. And dR is right it doesn't cost much and it's fun.
I'm interested in technology that can make available a few hundred watts of
power at least, at places where there is no grid or infrastructure, not
necessarily extra long distances, I don't care what it's called TMT or not
as long as it works and I don't need to string wire's from here to there and it's
reasonably efficient. I would be happy to input 200 watts to get 100 watts
from the receiver.

Eric Dollard Tesla Longitudinal wave Energy SBARC Ham Radio with Chris Carson - YouTube

Quote:
When I can convince myself that I know enough to design one successfully I am very interested in knowing without any doubt that it drags in excess electrostatic energy to prove to myself and any interested corporate robot naysayers that Tesla was in fact correct! nah nah neener neener! LOL That and it touches on getting into Teslas head as he had a very pragmatic grounded understanding of the "way things work" that I can seriously appreciate.
I agree, but I'm prepared to build many coils and research and experiment
every day. 3 years ago I didn't even really know what a transistor did.
Now I can do all sorts of stuff, so it would be difficult to harsh my buzz.

Cheers
__________________
 
  #724  
Old 12-22-2011, 06:58 AM
Kokomoj0's Avatar
Kokomoj0 Kokomoj0 is offline
Senior Member
 
Join Date: Jul 2011
Posts: 426
Quote:
Originally Posted by Farmhand View Post
Hi Kokomoj0

I don't know what that means.



Anyway I am watching the video now, I've watched that one before and I
must say that it is making a lot more sense to me now than it did when I first
watched it (before I started experimenting) it's my opinion there is a lot to be
gained by actually doing stuff. And dR is right it doesn't cost much and it's fun.
I'm interested in technology that can make available a few hundred watts of
power at least, at places where there is no grid or infrastructure, not
necessarily extra long distances, I don't care what it's called TMT or not
as long as it works and I don't need to string wire's from here to there and it's
reasonably efficient. I would be happy to input 200 watts to get 100 watts
from the receiver.

Eric Dollard Tesla Longitudinal wave Energy SBARC Ham Radio with Chris Carson - YouTube



I agree, but I'm prepared to build many coils and research and experiment
every day. 3 years ago I didn't even really know what a transistor did.
Now I can do all sorts of stuff, so it would be difficult to harsh my buzz.

Cheers

when you use a ham receiver or cb etc they have a signal strength meter on them. It basically means the meter was pegged to the right hand side LOL

I have played a lot in radio when I was younger and have experienced how well things work with a really good ground.

Notice what Eric said about the required ground the effects and the plate current and how to obtain those high currents.

Its a lot more than just math, the actual construction is also an art, then combining everything together into a final device can get quite complex.

I have been looking for my copy of orcad as you can throw some very difficult designs in the circuit simulator and it is surprizingly accurate.

I am very curious as to what it would do with these types of circuits if anything at all.

Now I do not know what you all have for transmission rules in your hood, but they require us to have a license except in certain freqs and low power levels and other few exceptions. Not that I could imagine how they would be able to track it easily if you get up into the 90% transmission effeciency range? Hertzian all you need is a couple loops and triangulate, but no matter where you go with this I would think that you would get so close to the same readings that it would be extremely difficult to trace? The thought just popped into my head LOL Not advocating anything here. Maybe Eric can elaborate on that?
__________________
 
  #725  
Old 12-22-2011, 07:09 AM
Web000x's Avatar
Web000x Web000x is offline
Silver Member
 
Join Date: Apr 2009
Posts: 547
Quote:
Originally Posted by OrionLightShip View Post
You sure about that? I don't hear anyone shouting eureka.



Retribution, we don't need no stinking retribution.

Dave, now this is just my opinion. I think everyone here would be a lot better off if you would refrain from being his messenger of doom and stop actively trying to solicit funds for him. Just my opinion. Stay or go, that is his right and decision to make, but this is just childish nonsense. I'm sorry he got screwed, but he should have dealt with it properly then when he could have possibly accomplished something. I'm also pretty sure that what ever happened to him, had the force of law on their side and there is no fighting that...not after all this time. Not without his drivers license number inscribed on the device. He needs to let this go and participate here like everyone else does. Life is tough on this planet, everyone knows that. You just have to get back up again, and again, and again. I wish I had the magic words for him to hear and regain that spirit which is in all of us, but sadly; I do not.

Orion
From what I can tell, I am the only one building out in the open on this thread. I am not done therefore, no "eureka" yet. You have to build to see.

A lifetime of experience > picture > 999 words. Eric has a lifetime of experience. I don't. I'll help the man however I can. Food costs money. I eat daily. Eric should also eat daily. Since I have no money, I can only try to pursued people to give Eric money. You obviously don't live on a meager amount of money since you are trying to part with it in the "Dollard Reward" thread. Please understand that we are all trying here. Complete poverty sucks. Everybody should be entitled to a "little bit extra". I am not sure that you have seen the brilliance in the T-Rex transmissions. Having gone to school for electrical engineering (not Chemistry as is your background), I see the truth to what is coming from Eric's mind, abstract thought. All of his math resonates with my observations.

Do understand that my cause is from the heart for a better world.

Dave
__________________
 
  #726  
Old 12-22-2011, 07:11 AM
dR-Green's Avatar
dR-Green dR-Green is offline
Gold Member
 
Join Date: Apr 2008
Location: Wales, UK
Posts: 1,557
Quote:
Originally Posted by Kokomoj0 View Post
Not that I could imagine how they would be able to track it easily if you get up into the 90% transmission effeciency range? Hertzian all you need is a couple loops and triangulate, but no matter where you go with this I would think that you would get so close to the same readings that it would be extremely difficult to trace? The thought just popped into my head LOL Not advocating anything here.
Sounds good to me

Quote:
Its a lot more than just math, the actual construction is also an art, then combining everything together into a final device can get quite complex.
No doubt, that's why I said basic working model It doesn't need to be that complex to get the effect. Are you only planning on ever building one full scale model, and what are you going to do with it?? All I'm saying is that not fully understanding the maths shouldn't prevent one from experimenting with such things because the experimenting would not be wasted time.
__________________
http://www.teslascientific.com/

"Knowledge is cosmic. It does not evolve or unfold in man. Man unfolds to an awareness of it. He gradually discovers it." - Walter Russell

"Once men died for Truth, but now Truth dies at the hands of men." - Manly P. Hall

Last edited by dR-Green; 12-22-2011 at 07:15 AM.
  #727  
Old 12-22-2011, 07:23 AM
dR-Green's Avatar
dR-Green dR-Green is offline
Gold Member
 
Join Date: Apr 2008
Location: Wales, UK
Posts: 1,557
Quote:
Originally Posted by Aether View Post
Yea, sorry I was just speaking for myself.
I know, it just looks like no one is wanting to just get in there and build something that's all [edit] My comments are because I've built flat spiral coils according to Eric's information in the video except mine are 30cm diameter, it's not a "proper TMT", but frankly if my coils are working then you'd have to do something really stupid not to have yours work. I think there's a reason why Eric made that video and included the construction details. I can't stress how little "planning" went into making mine. Not to be claiming miraculous results or anything because there are also other variables involved, the point is the simple pile of wood and copper thrown together in a basic arrangement works.
__________________
http://www.teslascientific.com/

"Knowledge is cosmic. It does not evolve or unfold in man. Man unfolds to an awareness of it. He gradually discovers it." - Walter Russell

"Once men died for Truth, but now Truth dies at the hands of men." - Manly P. Hall

Last edited by dR-Green; 12-22-2011 at 07:43 AM.
  #728  
Old 12-22-2011, 01:59 PM
t-rex's Avatar
t-rex t-rex is offline
Senior Member
 
Join Date: Aug 2011
Location: In the bushes
Posts: 421
Quote:
Originally Posted by the...dude? View Post
Mr. Dollard, I can "clean up" and make more legible some of the pictures you are uploading to the forum.

If this post is deemed useless I will delete it ASAP, let me know. I just want to throw in any help I can with getting your information across to everyone.
Yes, this is exactly what is needed. Please proceed with cleaning up the pictures. Thankyou.

@All
Ultimately what I put on here is for the silent majority, not useless or petty bickering. Remember, you must have a government license to transmit radio frequency energy(as in a Wireless Tesla Transmitter). Also, misshandling the device may end up burning out your neighbor's digital equipment. Or your own. These are not toys, and one part of the silent majority gleans these forums for information to make weapons against us(Corums).

73 DE N6KPH
__________________
SUPPORT ERIC DOLLARD'S WORK AT EPD LABORATORIES, INC.

Purchase Eric Dollard's Books & Videos - 70% of the sale goes to Eric and EPD Laboratories: Eric Dollard Books & Videos
Donate by Paypal: Donate to EPD Laboratories

Last edited by t-rex; 12-22-2011 at 02:19 PM.
  #729  
Old 12-22-2011, 09:09 PM
the...dude? the...dude? is offline
Junior Member
 
Join Date: Dec 2011
Posts: 4
The Oscillating Current Transformer (Repost)

Thank your for your reply Mr. Dollard. I will repost only those images that are in need of visual enhancement. I will let someone else judge whether these should be put in their own forum, left as I post, or downloaded and reposted via your T-Rex account, or otherwise distributed.

Pg23 Post #667

The Oscillating Current Transformer
Eric P. Dollard, “Wireless Engineer” © 1986

Originally published: May-June 1986 JBR, Pgs 15-23

The oscillating current transformer functions quite differently than a conventional transformer in that the law of dielectric induction is utilized as well as the familiar law of magnetic induction. The propagation of waves along the coil axis does not resemble the propagation of waves along a conventional transmission line, but is complicated by inter-turn capacitance & mutual magnetic inductance. In this respect the O.C. transformer does not behave like a resonant transmission line, nor a R.C.L. circuit, but more like a special type of wave guide. Perhaps the most important feature of the O.C. transformer is that in the course of propagation along the coil axis the electric energy is dematerialized, that is, rendered mass free energy resembling Dr. Wilhelm Reich's Orgone Energy in its behavior. It is this feature that renders the O.C. transformer useful for wireless power transmission and reception, and gives the O.C. transformer singular importance in the study of Dr. Tesla's research.

Fundamentals of Coil Induction

Consider the elemental slice of a coil shown in fig. 1. Between the turns 1, 2 & 3 of the coiled conductor exists a complex electric wave consisting of two basic components. In one component (fig. 2), the lines of magnetic and dielectric flux cross at right angles, producing a photon flux perpendicular to these crossings, hereby propagating energy along the gap, parallel to the conductors and around the coil. This is the transverse electro-magnetic wave. In the other component, shown in fig. 3, the lines of magnetic flux do not cross but unite along the same axis, perpendicular to the coil conductors, hereby energy is conveyed along the coil axis. This is the Longitudinal Magneto-Dielectric Wave.

Figure 1


Figure 2




Hence, two distinct forms of energy flow are present in the coiled conductor, propagating at right angles with respect to each other, as shown in fig. 4. Hereby a resultant wave is produced which propagates around the coil in a helical fashion, leading the transverse wave between the conductors. Thus the oscillating coil posses a complex wavelength which is shorter than the wavelength of the coiled conductor.

Coil Calculation

If the assumptions are made that an alternating current is applied to one end of the coil, the other end of the coil is open circuited, any additional external inductance and capacitance must be taken into account, then simple formulae may be derived for a single layer solenoid.

The well known formula for the total inductance of a single layer solenoid is

(1)

Where
  1. r is coil Radius
  2. l is coil length
  3. N is number of turns

Figure 3




The capacitance of a single layer solenoid is given by the formula

(2)

where the factor p is a function of the length to diameter ratio, tabulated in table 1. The dimensions of the coil are shown in fig. 1. The capacitance is minimum when length to diameter ratio is equal to one.

Because the coil is assumed to be in oscillation with a standing wave, the current distribution along the coil is not uniform, but varies sinusoidally with respect to distance along the coil. This alters the results obtained by equation (1), thus for resonance

(3)

likewise, for capacitance

(4)

Hereby the velocity of propagation is given by

eq5

Where

eq6

That is, the velocity of light, and

eq7

Where n equals the ratio of coil length to coil diameter. The values of propagation factor η are tabulated in table 2.

Thus, the frequency of oscillation or resonance of the coil is given by the relation

eq8

Where L(sub)0 equals total length of the coiled conductor in inches.




The characteristic impedance of the resonant coil is given by

eq9

Hence,

eq10

Where

eq11

and N equals number of turns. The values of sheet impedance, Z(sub)s, are tabulated in table (3).

The time constant of the coil, that is, the rate of energy dissipation due to coil resistance is given by the approximate formula

eq12

Where
  1. r = coil radius
  2. l = coil length

In general, the dissipation of the coil's oscillating energy by conductor resistance:
  1. Decreases with increase of coil diameter, d;
  2. Decreases with increase of coil length, l, rapidly when the ratio, n, of length to diameter is small with little decrease beyond n=1
  3. Is minimum when the ratio of wire diameter to coil pitch is 60%.

By examination of the attached tables, 1, 2 & 3, it is seen that the long coils of popular designs do not result in optimum performance. In general, coils should be short and wide, and not longer than n=1. The frequency is usually given as F(sub)0=V(sub)c/λ(sub)0 which by equation (7) is incorrect. Winding on solid or continuous formers rather than spaced slender rods, as shown in fig. 1, greatly retards wave propagation as indicated in equation (6), thereby seriously distorting the wave. The dielectric constant of the coil, ε, should be as close to unity as is physically possible to insure high efficiency of transformation.

The equations for the volt-ampere relations of the oscillating coil are

eq13

eq14

eq15

Where

list1

For negligible losses and absolute values

eq16

eq17

Where

list2

By the law of conservation of energy

eq18

If the terminal capacitance is small, then the approximate input/output relations of the Tesla coil are given by

eq19

eq20

eq21

eq22



NOTE: Mr. Dollard has stated that there are errors in the above tables 1-3 so bear this in mind.

Notes to the reader this was a much larger project than anticipated so I will update this periodically for the equations, lists and tables left out. Also being such a large volume there are bound to be error so please let me know and I will correct them ASAP. (On a side note, its quite an annoyance posting this in web friendly formatting)
the dude
__________________
 
  #730  
Old 12-22-2011, 10:01 PM
ren's Avatar
ren ren is offline
Gold Member
 
Join Date: Oct 2007
Posts: 1,108
Quote:
Originally Posted by Web000x View Post
Eric,
Because of the nature of the thread that you posted this in, I am assuming that the statement is in regards to parameter variation. I am curious about the context of really in the bolded portion of this quote. Even though I will be operating in the lower frequency range, are you saying that I will probably not get results from using a conventional transformer configuration that we spoke about on the phone and is posted in the following picture?
Or was that quote just to convey to the experimenter that they will need to find non-conventional materials to use if trying to get into parameter variation at high frequencies for the production of more Plancks?

Thanks,

Dave
Hi Dave and all,

I was also interested in the ferrite core comment in regards to inductive parameter variation. Some of Armagdns advice finally sunk into my pea sized brain and I wound a small toroidal transformer from scratch, placing 10 turns around the circumference before winding the secondary in the usual fashion. I commend you on your own build, I'm looking forward to what you come up with. I know it ain't easy getting stuff done on a shoestring budget. I've taken to roaming the streets collecting all the electrical junk people throw out for council pickup and taking it home to salvage parts for use and for scrap. @ 80 cents a kilo for transformers and motors it takes a fair weight before you get any significant funds from the recyclers but it's better than nothing.

In my travels I recently came across some audio equipment which netted a transformer I haven't come across before. I believe it may be similar to what Eric described in his post. It is a round core shaped in a rectangle with rounded edges. What I found interesting was the method of construction of the core itself. It seems to be made of fine (steel?) laminations, the first layer very thin in width and each layer progressively thicker till it reaches the center of the core then the reverse, giving the rounded effect to the core. Was a real dog to get out, covered in resin and plastic. I'm still trying to get the windings off to see if it is split in half or if it is one solid piece. It's probably old hat to the veterans here, but it was new to me and seemed to fit the description Eric wrote about. I will post a picture if anyone is interested.

I really hope this thread doesn't turn into a ****fight, it is one of the few places left on the Internet I look forward to visiting, and revisiting. I'd like to make a small donation to Eric when I get home. It won't be much but every dollar counts. I really do appreciate all he has shared here. It takes guts to do what he has done despite all the **** that has come his way because of it.

Im happy to see people alot more knowledgeable are digesting this information and are attempting to put it into practice. I don't expect anything amazing from my own efforts, lacking the complete understanding of what is really going on here, but it's fun to try. Every now and then something sinks in and progress is made.

Regards
__________________
"Once you've come to the conclusion that what what you know already is all you need to know, then you have a degree in disinterest." - John Dobson
  #731  
Old 12-23-2011, 12:05 AM
OrionLightShip's Avatar
OrionLightShip OrionLightShip is offline
Senior Member
 
Join Date: Nov 2011
Posts: 414
My apology

There won't be a fight because I hereby apologize for my anger and my lack of control in the way I dealt with that anger. I got mad at something Eric did with probably the best of intentions and I do apologize for that Eric. and @ALL

I hope you continue to share openly, your knowledge. I won't be inhabiting this thread or the Capacitance thread until such time the focus has passed from the narrow range now being studied. Only because I have no interest in the math and theory, but in the practical application of that math and theory. It is not that I am too stupid to follow, but I really don't have the time or inclination to follow it. I leave that to others so inclined.

Having said that, I would like to make one suggestion as a possibility. I'm not sure how many people are interested in the TMT or if even if the TMT is the main subject of interest but it would seem to me that instead of 20 people building the same coil, perhaps if the current benefactor has a video camera; Eric could himself build a coil with full video documentation. This coil could be sent to someone trusted here for testing, replication, distribution, etc... What better than a video of the master himself assembling the coil. That is something I would be willing to make a donation to see. Daily videos could be put up on YouTube for all to see. Just another crazy idea I had. The first $100 is on me if there are others so inclined and if Eric and his benefactor accepts this idea. Video lectures and video responses and questions....just a better media than no face and all paper.

Orion
__________________
 
  #732  
Old 12-23-2011, 01:18 AM
Sputins's Avatar
Sputins Sputins is offline
Silver Member
 
Join Date: Aug 2009
Posts: 530
Balanced TMT

Quote:
Originally Posted by T-rex View Post
@All
Ultimately what I put on here is for the silent majority, not useless or petty bickering. Remember, you must have a government license to transmit radio frequency energy(as in a Wireless Tesla Transmitter). Also, misshandling the device may end up burning out your neighbor's digital equipment. Or your own. These are not toys, and one part of the silent majority gleans these forums for information to make weapons against us (Corums).

73 DE N6KPH
While we all hope to see you here, perhaps from time to time Eric, the material you have presented here on the Energetic Forum is absolutely priceless.

With further time (and experimentation) it will all be show to be true. The many, many pages on the fundamentals of Electricity, Dimensionality, Space, Time, Dielectricity and Magnetism and of course the NFG fun will be studied and referenced for years to come, by people around the globe.

As I said in an earlier post, "history is happening right here"! That statement was indeed true.

Thank you Eric Dollard!

By the way,

I have always loved the picture attached, It shows Eric Dollard in "full flight" and with fire in your eyes! (Perhaps hair a little darker too) hehe.

It looks like to me that it's a "Balanced" TMT coil type device. Single loop primary, heavy secondary coils and the extra coils on each end. Perhaps it's the same one as on the inside cover of "Introduction to Tesla Transformers"?

What can you tell us about that TMT coil, the photo and presentation itself?
What about the power supply circuit?

Thank you

Regards
Michael.

Attached Images
File Type: jpg zpe_dollard_tesla1.jpg (14.2 KB, 59 views)
__________________
 
  #733  
Old 12-23-2011, 02:13 AM
Kokomoj0's Avatar
Kokomoj0 Kokomoj0 is offline
Senior Member
 
Join Date: Jul 2011
Posts: 426
Quote:
Originally Posted by OrionLightShip View Post
There won't be a fight
Orion
Takes a real man to do that!

congrats!
__________________
 
  #734  
Old 12-23-2011, 02:34 AM
Web000x's Avatar
Web000x Web000x is offline
Silver Member
 
Join Date: Apr 2009
Posts: 547
There is no reason to fight. We are all in this together and are looking for solutions together. We will win this game.

@ren, please do post the photo. I think it would probably help stir up some more useful hints from T-Rex.

Dave
__________________
 
  #735  
Old 12-24-2011, 12:49 AM
jpolakow jpolakow is offline
Senior Member
 
Join Date: Aug 2011
Posts: 152
Quote:
Originally Posted by ren View Post
Hi Dave and all,

I was also interested in the ferrite core comment in regards to inductive parameter variation. Some of Armagdns advice finally sunk into my pea sized brain and I wound a small toroidal transformer from scratch, placing 10 turns around the circumference before winding the secondary in the usual fashion. I commend you on your own build, I'm looking forward to what you come up with. I know it ain't easy getting stuff done on a shoestring budget. I've taken to roaming the streets collecting all the electrical junk people throw out for council pickup and taking it home to salvage parts for use and for scrap. @ 80 cents a kilo for transformers and motors it takes a fair weight before you get any significant funds from the recyclers but it's better than nothing.

In my travels I recently came across some audio equipment which netted a transformer I haven't come across before. I believe it may be similar to what Eric described in his post. It is a round core shaped in a rectangle with rounded edges. What I found interesting was the method of construction of the core itself. It seems to be made of fine (steel?) laminations, the first layer very thin in width and each layer progressively thicker till it reaches the center of the core then the reverse, giving the rounded effect to the core. Was a real dog to get out, covered in resin and plastic. I'm still trying to get the windings off to see if it is split in half or if it is one solid piece. It's probably old hat to the veterans here, but it was new to me and seemed to fit the description Eric wrote about. I will post a picture if anyone is interested.



Regards
Eric relayed the following to me:

@Ren
You've got something special with those laminations in the transformer, something different than normal. Try to make some diagrams and pictures if you can.

@All
If I were to do it, I would not use ferrite no.
Alexanderson lays it out in his patents. Need a certain amount of oxidation on the core laminations. Bake laminations and cook them to get a certain amount of oxidation. Check out the patents for more details. That's one idea.

Navy uses alloyed permeable metal tape. Some examples: permavar umetel tape. The phone company uses very fine wire instead of ferrite. The iron wire must be at 90 degrees to the copper windings. If it is used as an inductor you want to put a cut or slit in the iron core windings so current doesn't flow. If it is a transformer you want to saturate the core so don't put a slit. With a magamp you want the core to be saturated, ferrite kind of defeats this. Ferrite is a bunch of separate particles in the core that can't conduct electrically with each other so saturation is difficult. Kind of like an air core.

You want electrical conductivity in the same versor axis as magnetic inductivity(flux). But the current in the windings flow 90 degrees to the magnetism flowing in the iron. Right angles to each other. Space Quadrature. While there is actually no current flow in the conductivity of the core, it seems to be a necessity. This may or may not be important with the magamp. However, don't take my word or theory as a final say on it. Experimentation is necessary. It is possible ferrite may work, so far it is unknown. You must find out for yourself.
__________________
Please help support my indiegogo campaign: Cosmic Induction Generator
  #736  
Old 12-24-2011, 02:36 AM
jpolakow jpolakow is offline
Senior Member
 
Join Date: Aug 2011
Posts: 152
Quote:
Originally Posted by Sputins View Post
I have always loved the picture attached, It shows Eric Dollard in "full flight" and with fire in your eyes! (Perhaps hair a little darker too) hehe.

It looks like to me that it's a "Balanced" TMT coil type device. Single loop primary, heavy secondary coils and the extra coils on each end. Perhaps it's the same one as on the inside cover of "Introduction to Tesla Transformers"?

What can you tell us about that TMT coil, the photo and presentation itself?
What about the power supply circuit?
This response was relayed to me from Eric:
That machine was designed to do plasma experiments not to transmit, it was a balanced TMT as you said. If you want to build a transmitter for experiments(without transmitting) you need two coils out of phase.

Our hands were drawing electrostatic energy off of the two terminals to light the bulb. That geometry was specific for plasma generation, not necessarily what you want for transmitting into the earth.

If you want to see how the geometry of the Wireless Tesla Transmitter works you must check the Colorado Springs notes. It has the number of turns, width/height ratio, etc. Taking these you can scale it down to anything you want. My analysis of the Tesla Transmitter (shown in the Colorado Springs Notes) is in Intro to Tesla Transformers. My analysis is not just of the Colorado version, but the Tesla Transmitter in general. Everything is there. Although I must warn you- you need a government license if you want to transmit radio frequency energy. The one in the picture is balanced so it can't transmit. Can get much higher energy densities this way, so you need to make sure you don't burn your neighbors house down. If you fired half of the power in the picture shown you would burn something up. It had 1/2 of a mega-volt-ampere of field activity. Wrongly called a resonant circuit with a high Q. It has distributed constants. Read theory of wireless power.

This transmitter was described in Intro to Tesla Transmitters. But also described is the Colorado Springs version.

As far as the equipment we(myself P.T. Farnsworth the III, and David Franklin) had in the RCA Bolinas Laboratory:
The power supply we used was a 10 Kw radio transmitter. It was a specially designed radar transmitter in a push/pull scenario. It was a pulsed high frequency radio transmitter. The switching tubes were push pull- a set of 6 Eimac 450-TL hf transmittting triodes. Plate voltage of 6300 volts. Discharges leapt from the of end of the coils to a length of 4 1/2 ft. Total field energy of 1/2 million volt-amperes reactive. 3000 kilo-cycles per second. RCA came in and cutoff the 3 phase power and took all of the oil filled transmormers, so what you see is us just lighting a small bulb in our hands. Don't try to copy that device, it was primordial. I didn't have any of the math done yet.

Everything I've written so far is how to do this right. It's already been written in this thread and my books. Some of the pieces and pictures I have posted in this thread may seem like disparate pieces of information, but it is all connected. Each is important to the replication of the Tesla Magnifying Transmitter. I've given you all the tools.

Advice to anyone wanting to get involved building the tesla magnifying transmitter: before you get started go get a ham radio license. Otherwise you shouldn't be getting involved in this sh!t. You have to transmit on Industrial Scientific and Medical frequencies or Ham radio. Ham radio goes back to my original aim. My first question for you before you start building this is: Why do you want to build this thing in the first place? Are you willing to read the books and do the research required to build it? I'm not going to spoon feed all of you or you'll never learn anything.

My only desire was to develop this technology for the Navy so that they could communicate with submarines, without the subs having to drag long antennaes behind them. And then Olin Bales ended up with my lab and all my equipment. And now it's being resold on ebay. I could have predicted the next big California earthquake but now its over and gone. It is extremely unlikely my antenna field will ever be rebuilt. I want to see the first anti relativistic (anti-Einstein) radio transmission. Who is going to do this? WHERE IS LAMARE??

I am going to make a documented case that the Corums ripped off the Army. I could have done way better. I will publish this later. They're next.

</End of Eric's Transmission>

Now from me (let me preface this is not an attack on anyone):
From Eric's point of view he is very frustrated at people's questions/responses. To him everybody has taken a lacksadaisical approach to what he is presenting. It seems nobody has been reading the research material/references he has pointed out. So when someone asks a question and Eric doesn't respond, it is generally because the question has already been answered in one of the references he has provided. The Steinmetz material and his previously published material is the most important. So to get a response, an intelligent question must be asked. In other threads in the forum it is generally not assumed that you must read supporting materials to participate, but by Eric in this thread it is.

Now let's get down to what Eric would like to see happen. From Eric's point of view he agreed to start posting his writings in this thread on one condition: The readers investigate and pursue the people that have screwed him (Olin Bales primarily). Obviously readers can't just silently agree to something by reading this thread, but that was the outcome hoped for. It is probably hard to fathom how much Eric has lost. But by knowing it you will understand his comtempt for the human race- yes that includes you and me. Eric has the best understanding of electricity since Tesla, and almost everyone he has come into contact with has tried to screw him over one way or another, to use him for this information. He has had entire transmitting stations, costing millions of dollars and years of his life to be built, taken from him. Not just once, but multiple times. From his point of view his whole life's work since he was 6 years old has been taken from him. That will start to explain SOME of his negativity.

So now to what he wants: He wants to see people actively pursuing the people that have screwed him. He wants this more than anything else. This was his prime motivation in starting this thread. From his point of view he has spent 6 months of his life (full-time) researching, writing, re-writing, and inventing everything that has been written here. And nobody has pursued Olin. More information on this can be gleaned from the yahoo group N6KPH. Donations to him are helpful too.

This is not some cry for help. This is more like- Eric's interest in this thread has waned, and he has no more motivation for pursuing it. So- if you like this thread and want to see it continue, you have to contribute in some way. This is not a request for donations. This is more like: Somebody please start looking into the Olin Bales situation because Eric is on his way out. Interest has been lost.

Now some comment from me regarding the present situation:
I'm glad nobody will be bickering and fighting. Arguments and insults will only push Everyone further away from our common goal: building working devices. When we fight, we are divided, and we lose energy towards achieving our goal. Although differences occur, I think it's extremely important to show respect for each other's opinion, however biased/insulting/outlandish/incorrect it may be. When we resort to insults, that is when we are in a defensive mode and it is difficult for further cooperative progress to be made. Is this a primer for something to come? Why yes it is, thankyou for asking. Some inflammatory things have been written so far. I'm not pointing fingers.

Important!! --> I assure you there is some more of that coming by the way. I know firsthand. In the very immediate future. So mental preparation must be made. Do not let anything written force you into a defensive response. Any negativity will impede progress, and insure degeneration of this thread. You can't control anyone elses response so you're going to have to be happy controlling your own behavior. Let's just say a negative response is hoped for by some, and that is by design, to make this thread degenerate. Simply put: please do not respond to negativity, not just for yourself but for all readers.
__________________
Please help support my indiegogo campaign: Cosmic Induction Generator

Last edited by jpolakow; 12-24-2011 at 08:08 PM.
  #737  
Old 12-24-2011, 03:02 AM
Redisnoc Redisnoc is offline
Junior Member
 
Join Date: Nov 2009
Posts: 15
jpolakow,
Thanks for the input--
rest assured that "You get the most Flak when you are over the target"
We are ALL directly headed over the target--
and what jpolakow says below HAS to happen, so expect it and
do as he requests, 'pass the negative by.
Many thanks,
Eric and jpolakow, and Dave
another Dave

quote
Important!! --> I assure you there is some more of that coming by the way. I know firsthand. In the very immediate future. So mental preparation must be made. Do not let anything written force you into a defensive response. Any negativity will impede progress, and insure degeneration of this thread. You can't control anyone elses response so you're going to have to be happy controlling your own behavior. Let's just say a negative response is hoped for by some, and that is by design, to make this thread degenerate. Simply put: please do not respond to negativity, not just for yourself but for all readers.

Than
__________________
 
  #738  
Old 12-24-2011, 03:55 AM
ren's Avatar
ren ren is offline
Gold Member
 
Join Date: Oct 2007
Posts: 1,108
[QUOTE=jpolakow;172456]Eric relayed the following to me:

@Ren
You've got something special with those laminations in the transformer, something different than normal. Try to make some diagrams and pictures if you can.

Will do.

I will be home in a couple of days and I'll post some pictures.

Regards
__________________
"Once you've come to the conclusion that what what you know already is all you need to know, then you have a degree in disinterest." - John Dobson
  #739  
Old 12-24-2011, 11:26 PM
t-rex's Avatar
t-rex t-rex is offline
Senior Member
 
Join Date: Aug 2011
Location: In the bushes
Posts: 421
Welcome Aboard the Good Ship Lucifer (NFG-666)

It is tragically evident that "public forums" must labor under the constraint of arrogant bottom feeders. This is the intrinsic nature of 21st century America; A law so to speak, that is;

(1) The lowest common denominator must dominate

America is like a stricken ship, a ship with its mast dragging the bottom and its keel to the sky, sailing to a violent self destruction.

The individual American in the 21st century is best described by Oliver Heaviside, Electro Magnetic Theory Vol I, Art 9, "They become mere eating, drinking, and money grabbing machines." Heaviside continues: "and yet they seem so happy." Well Oliver, today is not the 19th century, it's the 21st, so the "happy" is replaced with "malevolent".

We seek new symbolisms by which to express our modern techno-fascist society.

(2) Replace "In God We Trust", with "I Want A New Drug Now."

(3) Remove the "Stars and Stripes Flag", and raise a flag displaying a burning car.

Yes indeed, 21st century America. Let's relate this to the "Energetic Forum":

(4) Where Is My Free Energy Fuse Box!? I Want My Free Energy Fuse Box, I Want It Now! I Don't Care How It Works Or What It Does, I WANT IT AND I WANT IT NOW!!

(5) "Pump Them Scalar Waves",

(6) "Smash Them Dipoles"

(7) "the Back E.M.F."

We have verily become inundated with this coyote vomit for decades now. Endlessly flailing with "Bedini Battery Bashers" for a quarter century now, but not once is seen,

(8) Kilowatt-Hours IN vs. Kilowatt Hours OUT. Not once!

Remember the Soviet Scalar Conspiracy, The Tesla Howitzer, Tesla E.L.F. and control, Tesla Switch, Tesla this Tesla that. But Where is Tesla? Nikola Tesla curses the Soviet Scalar Xenophobes, the primary source of Tesla Dis-Information.

But out of the morass a golden dragonfly rose into the air, La-mare and his "The First Longitudinal Moon Bounce." At this point I shifted my writings from rudimentary ideas to reproducible engineering with the "military minded" aim to initiate within this "Energetic Forum" the "First Tesla Telluric Transmission in history." A perfect compliment to La-Mare's efforts.
The Objective:

(9) International Ham Radio Contest to disprove Einstien's Theory.

Ultimately my primary objective is to continue my work started at Landers, that is;

(10a) Develop a superior submarine communications system for the United States Navy.

(10b) Adapt system principles to a system for Advance Seismic Warning (A.S.W.). This for the City of Los Angeles Dept. of Water and Power.

These systems were completed at Landers by the way, in a completely engineerable form. The product of 30 years of work. (See pictures of the site on the American Marconi Website)

None of the work at Landers was ever intended to be released to the public, this station was for government use only. But the "Legal System" gave it to Bales. It has come to pass that it is being sold off a chunk at a time on e-bay. Homeland Security. Let's Hope Israel gets some of it and turns it into weapons of mass destruction. Providence plays these jokes now and then.

For a basic description of my work at Landers see; "System for the Transmission and Reception of Telluric Waves", E.P. Dollard. The engineering embodiment at Landers took the work of Tesla and Alexanderson to the next level, and being a Naval development, will not be demonstrated or discussed on my part. However, even the weak minded may have noticed that I am giving complete engineering instructions on Tesla's Telluric Transmission System, as he envisioned it. I am speaking to what I suspect may be a "silent majority." And I know that any competent radio engineer or experimenter can make a go of it. However what part of this silent majority has a malevolent intent (Iran let's say)?

One thing is for certain, if you get close to a working system, or present it, the Good Ship Lucifer will P.E.E.E. on you. This is how Tesla's work is obstructed, and the 21st Century American is well suited for this task. What else can he do?

73 DE N6KPH
__________________
SUPPORT ERIC DOLLARD'S WORK AT EPD LABORATORIES, INC.

Purchase Eric Dollard's Books & Videos - 70% of the sale goes to Eric and EPD Laboratories: Eric Dollard Books & Videos
Donate by Paypal: Donate to EPD Laboratories
  #740  
Old 12-25-2011, 02:17 AM
OrionLightShip's Avatar
OrionLightShip OrionLightShip is offline
Senior Member
 
Join Date: Nov 2011
Posts: 414
I for one, would like for Eric to continue his discourse, and I regret my previous negative reaction to his demands. Since there was no response to video, I will go ahead and make that donation next week anyway. I prefer to use snail mail and a postal money order. I have an address in morro bay, if that is the correct one to use.

The charge of theft against Bales would best be brought about directly by Eric since he is the one holding the actual evidence. If Eric files a criminal complaint and hands the evidence to the police, they have to investigate it. I am not a lawyer, but that is what makes sense to me. I don't know if a third party can initiate a criminal complaint.

Good luck and I hope my small donation will be of some help.
Orion
__________________
 
  #741  
Old 12-25-2011, 03:28 AM
Kokomoj0's Avatar
Kokomoj0 Kokomoj0 is offline
Senior Member
 
Join Date: Jul 2011
Posts: 426
If he reported it when it happened, and has the records, now its on ebay, heads will roll!
__________________
 
  #742  
Old 12-25-2011, 03:40 AM
Kokomoj0's Avatar
Kokomoj0 Kokomoj0 is offline
Senior Member
 
Join Date: Jul 2011
Posts: 426
Quote:
Originally Posted by T-rex View Post
Remember the Soviet Scalar Conspiracy, The Tesla Howitzer, Tesla E.L.F. and control, Tesla Switch, Tesla this Tesla that. But Where is Tesla? Nikola Tesla curses the Soviet Scalar Xenophobes, the primary source of Tesla Dis-Information.


73 DE N6KPH

yeh talk about dating ourselves!

when you think about it since light falls off at the square of the distance and we can see a star 13 billion light years away that sort of tells me that either we all have super man eyes or there is a longitudinal component to light.
__________________
 
  #743  
Old 12-25-2011, 04:50 AM
h2ocommuter's Avatar
h2ocommuter h2ocommuter is offline
Senior Member
 
Join Date: Sep 2009
Location: Fresno Ca,
Posts: 147
Send a message via Skype™ to h2ocommuter
Lightbulb no guessing just methodical research

Thank Raui, I knew the artist style, He is a masterful conceptualist...M c escher
too the point.... I appreciate the clarity in your approach. As These new maths are my primary objective I find your incites refreshing. Thanks a lot.
Conductance =1/R

@Eric
I like many have marveled at your actions for many years and hope we collectively can salvage your goals and dreams somehow.
I accept you have many objections and some may be vindictive. I can but imagine your efforts being dashed and smashed at Bolinas, and "Boxer as a representative of the people?" and yes not only from the ship yard to this Bales stiff. yea i am peeved to my highest order and it probably couldn't mean less to you I encourage you to persevere and overcome. shake off the dust, lift your head and rejoice, we are here and want to follow your leading's.
As humbling as it may be I am only worthy to be here because i admire your work. I did not start realizing my mental deficiencies at a young age as you did but at 43 years old or about that. I have not ceased to give my every energy to building what is calculated and correctly dementionalized into my head. You may think you are talking to ingrates that want to be spoon fed. some may be I am not and anyone who thinks this is what they need should go to a pig-sty and have a lunch on me. Stop begging pull up your trousers, hit the books. This work is of the highest level as La Marie has proposed and disproving Einstein is one of my highest priorities. I just go about things as I conceptualize and understand their meaning.

My last point humbly and boldly I think new videos may be what is necessary to invigorate some interest and funds.
I will be available to help in these in-devours. I have been collecting many of the devices you had used in your videos with Tom Brown et-all and would be happy to set up all experiments, document and video the details as needed.

Take Hope and peace.
I believe in you Eric P Dollard
Even though we are surrounded by wickedness we must remain true to ourselves.
You are the best Eric! We stand with you. No one will make it better for us, but us! "individually"!

Merry Christmas!

John has my number

Zane
__________________
 

Last edited by h2ocommuter; 12-25-2011 at 06:19 AM. Reason: Little bit o this little bit o that
  #744  
Old 12-26-2011, 09:08 PM
t-rex's Avatar
t-rex t-rex is offline
Senior Member
 
Join Date: Aug 2011
Location: In the bushes
Posts: 421
Supplement to Intro to Tesla Transformers

__________________
SUPPORT ERIC DOLLARD'S WORK AT EPD LABORATORIES, INC.

Purchase Eric Dollard's Books & Videos - 70% of the sale goes to Eric and EPD Laboratories: Eric Dollard Books & Videos
Donate by Paypal: Donate to EPD Laboratories
  #745  
Old 12-26-2011, 09:13 PM
jpolakow jpolakow is offline
Senior Member
 
Join Date: Aug 2011
Posts: 152
Supplement to Intro to Tesla Transformers

The so called Hairpin circuit is really no more than Tesla's first experiments with the one turn primary. Since a short section of transmission line serves as an inductance then hence the Hairpin.
__________________
Please help support my indiegogo campaign: Cosmic Induction Generator
  #746  
Old 12-26-2011, 10:21 PM
amigo's Avatar
amigo amigo is offline
Silver Member
 
Join Date: Aug 2007
Posts: 744
Wonderful, I missed on four months of postings.

Eric, if that's really you, thank you for returning. I know a simple thank-you does not get you far, never the less I appreciate your courage to post the volumes of information so far, despite the forces working against you.

Oh, a question for you, did you ever figure out what Tesla meant about knowing the significance of 3, 6 and 9 as being the key to the Universe?

@All: as an original poster I have just a small request (as I do not have moderation powers over my own thread):

Would you please tone down with the "noise". No offense to anyone, but this thread is about Eric, not you. Please let him write, as he has much he could tell us. Thank you.
__________________
Are the ravings of a lunatic signs of a genius?

Last edited by amigo; 12-26-2011 at 10:34 PM. Reason: add a question
  #747  
Old 12-26-2011, 10:53 PM
jpolakow jpolakow is offline
Senior Member
 
Join Date: Aug 2011
Posts: 152
Quote:
Originally Posted by amigo View Post
Wonderful, I missed on four months of postings.

Eric, if that's really you, thank you for returning. I know a simple thank-you does not get you far, never the less I appreciate your courage to post the volumes of information so far, despite the forces working against you.

Oh, a question for you, did you ever figure out what Tesla meant about knowing the significance of 3, 6 and 9 as being the key to the Universe?
Eric told me the following while he was making dinner:

Here Tesla was referring to numerology. Take all the numbers in anything in your life (your ph number, address, license plate, etc.) Add all the numbers together, when you reach 9 you start over again (A Base 9 system). For example say your License plate is 134. Add the numbers together: 1+3+4 = 8. So your number is 8. Another example license plate: 568 = 5+6+8 = 19 = 1+9=10 = 1 in a base 9 system. Mind is a little foggy so not sure on the exact details. You will find these numbers will ocurr everywhere in your life. It is an ancient Egyptian thing, called the Chaldean system. Theoretically based on your cosmic "attunement" you will see the numbers occur more or less often. Tesla made sure everything he did in his life was based numerically on the number 3. 3 phase power uses the least amount of copper of any wire line transmission system. The reason why remains a mystery today. Steinmetz attempts to explain it in his AC book. (by the way the Holy Trinity is a popular Christian archtype. Tha father, the son, and the holy ghost). Tesla's father was a priest. Tesla was supposed to be a priest. Tesla became a priest of different field - science. Read opening chapters of J.J. Thompson's "Electricity and Matter".
__________________
Please help support my indiegogo campaign: Cosmic Induction Generator
  #748  
Old 12-26-2011, 11:00 PM
jpolakow jpolakow is offline
Senior Member
 
Join Date: Aug 2011
Posts: 152
Here you will find further informatino on the Chaldean System:
Chaldean Numerology, Chaldean Vibrations, Compound Numbers

A short excerpt from the website here:

"As you may already have noticed, no alphabet letter was assigned to the number 9. The reason why the number 9 was omitted under Chaldean Numerology system was because the Chaldeans felt the 9 was holy, sacred, and thus to be held apart from the rest. However, should your name or that of someone you know total 9, then the 9 remains. Let's analyze a sample name under Chaldean Numerology system:

LESLIE

3 + 5 + 3 + 3+1+5 = 20 - 2 + 0 = 2

ERIC

5 + 2+1 + 3 = 11 - 1 + 1=2

Total: 2 + 2 = 4

All numbers, whether found under this system or the Pythagorean one, have basically the same meanings, symbols, nature, and character. This seems to be the universal rule of all number systems.

However, under the Chaldean Numerology system, it isn't enough to know what the single numbers mean. One must also know what the "compound," or "double," numbers mean is well. The single Chaldean Numerology number simply represents the physcal outward appearance of a person's name, whereas the compound Chaldean Numerology number represents the deeper, metaphysical, hidden influences or forces behind the name. In our above example, although the name adds up to the single num*ber 7, the name also has three compound numbers—20 in the first name, 11 in the middle name, and 21 in the last name.

Once the physical (single number) and metaphysical (compound number) aspects of your name have been determined, the next important step is your date of birth.

Your date of birth means the day of the month you were born under, for it too has its own occult symbology and significance. So, Leslie Eric Scott, born on the 8th day of December, would also be considered a number 8 per*son under this system. Your date of birth is extremely important because it is unchangeable and therefore a constant, like the needle pointing north on a compass. A person may undergo a series of name changes over the years because of marriage, adoption, and the like, but the birth date remains the same."
__________________
Please help support my indiegogo campaign: Cosmic Induction Generator
  #749  
Old 12-26-2011, 11:18 PM
amigo's Avatar
amigo amigo is offline
Silver Member
 
Join Date: Aug 2007
Posts: 744
Thank you jpolakow, that was very resourceful.

Although, I do not subscribe to any kind of mysticism, as that's has been used as a tool of mass manipulation for a long time now on this planet.

So, there must be a more rational explanation (factual rather than faith) as to why the specific numbers relate to specific things (perhaps geometry based rather than arithmetic).

Could you please ask Eric if he would talk to us about Radiant Energy? I've recently heard references to RE and Tesla's work being used in physical teleportation and/or time travel (?!) experiments by our "overlords", which adds yet another tangent to all the (dis)info one can read about RE on the Net.
__________________
Are the ravings of a lunatic signs of a genius?
  #750  
Old 12-26-2011, 11:59 PM
ren's Avatar
ren ren is offline
Gold Member
 
Join Date: Oct 2007
Posts: 1,108
pics of unusual laminations.

Here are the pictures of the transformer I referred to earlier:





You can see the laminations in this photo more clearly. I believe the transformer was designed for step down from 240vac to 25vac (multiple low voltage outputs) from memory, Ive got the sticker that was on it somewhere.





Here is the details on the model number





Also, I was reading some of the info Eric shared and came across this:

"Winding on solid or continuous formers rather than spaced slender rods, as shown in fig. 1, greatly retards wave propagation as indicated in equation (6), thereby seriously distorting the wave."

This brought to mind a small fluro inverter chip I have been playing around with. I was fascinated by the way the secondary seems to be wound. On the right hand side you can see the primary which I measured somewhere in the 70kHz range from memory, a nice clean sine wave from 12vdc source. The secondary seems to be divided into three sections, and since I cannot see any joins on the bottom of the PCB I am assuming that all three are tied in series for the HV output (with a series capacitor). This was another first for me, I have read others descriptions of winding a secondary like this but never seen it implemented. As you can see Im not using it to power a fluro, makes a nice little arc in that flash tube...

Perhaps Erics post above explains why it has be designed this way?





Regards
__________________
"Once you've come to the conclusion that what what you know already is all you need to know, then you have a degree in disinterest." - John Dobson
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

Choose your voluntary subscription

For one-time donations, please use the below button.


All times are GMT. The time now is 06:10 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers