PDA

View Full Version : Bedini-Lindemann 2012 Conference


Aaron
11-18-2011, 02:12 AM
Please visit this site to receive information on the
Bedini-Lindemann Conference 2012!

John Bedini & Peter Lindemann Conference 2012! (http://energeticforum.com/conference)

This conference will be limited to 150 people and
that's it. First come first serve.

It will be around the June-July time frame of
2012 and will be scheduled so it doesn't conflict
with any other major energy related conferences.

Details posted as we are able.

superman9976
11-18-2011, 02:34 AM
Hey guys,

Are you able to bring Tom Bearden into one of these conferences? I think that would be a very exciting experience. Especially in a smaller event like this. There would be much to learn. I'm sure between Bedini and Bearden talking and sharing their experiences and maybe even showing some would take up all the conference time.

Thanks,

Chris:cool:

Aaron
11-18-2011, 04:57 AM
I can suggest it. Tom Bearden's health isn't the best for traveling
from my understanding but I can always ask.

Web000x
11-20-2011, 07:15 PM
Would you consider having Eric Dollard as a guest? I know that he and John Bedini have some semantics issues to work out about the "scalar wave", but John did look me in the eye at the last conference and say "You can't argue with Eric Dollard."

Dave

Aaron
11-20-2011, 08:16 PM
Dave,

I'm sending you a pm.

ouphoenix619
11-21-2011, 07:35 AM
I'm a total compete newbie at this, but am completely intrigued. Only began reading about JB's ssg about a week ago, and have already built a fan from Imhoteps instructions and am having fun with that. Going to build another this week, except I will rewind the coils this time.

Anyhow, hopefully by conference time next year I will be up to speed enough to not be a deer in the headlights :suprise: if I am lucky enough to go. :notworthy:

Many thanks to everyone for sharing their knowledge.

Les_K
11-25-2011, 06:23 AM
This looks like a wonderful opportunity, Thank you.


Les

stonewater
11-25-2011, 04:31 PM
I will be there !!!

Tom C

malohnes
11-27-2011, 12:06 AM
I agree, it would be great to have Eric Dollard there as well.
I too hope to attend...all depends on my work load! To be immersed in all this, outside of forums and my tinkering would be renewing, refreshing, educating and motivating. SO glad it is on the PNW, area.

ibpointless2
11-27-2011, 03:58 AM
What topic's will be discussed during the conference?

LutherG
11-28-2011, 01:25 AM
I'll be there - can hardly wait!!

Luther

Aaron
11-28-2011, 02:30 AM
What topic's will be discussed during the conference?

All details will be emailed out to anyone on the conference list as soon as
details are known. This is 7-8 months away so we have time to get
everything together in a timely manner.

teej_seeker
11-28-2011, 11:32 AM
I am keen to attend.

I am from Malaysia and would appreciate the lead time in planning for such a conference.

tejinder
subang jaya, malaysia

Aaron
11-30-2011, 04:57 AM
Just a few more details:

http://www.energeticforum.com/conference/

Tentative date so far is June 30th & July 1st (SAT & SUN) of 2012.

There are camping accomodations you can see for anyone with
a motorhome or for anyone that wants to pitch a tent in the field
behind the building. We will be posting information on discounted hotel/motel
info soon.

Also, the schedule of speakers will be developed bit by bit and will be
released as it is finalized.

Since it is 1st come 1st serve, we will be sending registration forms to
anyone that signed up for the mailing list on the conference page before
we post it publicly so make sure to get on that list if you have any interest
in attending.

Nobby418
12-29-2011, 06:41 PM
Hi Aaron,

Wondering if you have thought about live streaming the conference for those of us who may be unable to make it. I'm based in UK and finances will probably inhibit my attending,

Many Thanks, Nolan

Aaron
12-29-2011, 07:43 PM
Hi Nolan,

This is a possibility. Right after the new year, we'll post more details and updates on the agenda for the conference.

Thanks for your interest!

thaelin
01-02-2012, 05:27 PM
Hi Aaron:
I had a chat with my mgr and got the go ahead to put in for the time off. I need to find out when for sure as soon as possible. Another point I may have missed or may not have been posted is the cost involved. These two points will pave the way to whether I can go or not. The last one was over my head so had to pass. Any kind words would be greatly appreciated. Thanks

Thay

Aaron
01-18-2012, 08:00 AM
Ok everyone, this is going to be a dynamite conference!

Most of the details are worked out now and we are just getting the final confirmation from some of the speakers.

Some hotel discount deals for the conference have been worked out as well.

I should be able to post all the updates in about a week so stay tuned!

If you're not on the notification list yet, get on it asap:

http://www.energeticforum.com/conference/

As soon as details are posted on the speakers, registration, etc... registration for the event will be first come first serve and limited to 150 people. There are HUNDREDS on the notification list so you don't want to miss out.

alvarohn
02-07-2012, 01:55 PM
Hi all, this is my first post in energetic forum, but I am been here reading for a long time.

Aaron is there any chance that the conference could be broadcasted live? on internet?

I am in Uruguay and going there is waaaay off my posibilities... and John Bedini haves me worried when he says that we don't have much time!! lol.... our beloved SUN is going to burn everything with 2012/2013 solar storms?? I wanna be ready.

Again, it would be amazing if the conference could be transmited live on internet.

best All !!! I love you all, I read and read and feel like I know you guys!!

best,,

Alvaro Hernandorena

Aaron
02-07-2012, 05:20 PM
Hi Alvaro,

We have discussed live streaming but have no plans to do this at this time.

We do however have finalized and confirmed all the speakers and will be launching the website with all details this week!

Aaron
02-08-2012, 11:00 PM
http://www.energeticforum.com/conference/index_files/johnbedini-peterlindemann.jpg

Revealed: Advanced Technologies Released to Public

Bedini-Lindemann 2012 Science & Technology Conference


Spokane, Washington - February 1, 2012


The Inland Northwest continues to prove itself to be fertile ground for the development of advanced technologies, especially relating to renewable energy. Four leaders in the grassroots, sustainable energy field, from the Spokane, Washington and Coeur d'Alene, Idaho areas, join forces by creating a one-of-a-kind conference, highlighting new and potentially disruptive technologies.


This conference will be held at the Eagle's Lodge in Hayden, Idaho, on June 30th and July 1st, 2012. A portion of the proceeds will be donated to this non-profit organization, which is dedicated to community service and charitable causes in the Inland Northwest.


On the first day of this two-day event, participants will learn how to take a new invention from the idea stage, through prototyping, development, and into mass manufacturing. They will also be shown a spectacular technology that is raising the fuel efficiency of gas generators by as much as 300%, and the mileage of cars and trucks by as much as 70%.


After lunch, they will be introduced to a new discovery in biochemistry that is being called the "greatest breakthrough in health science in our lifetime". And finally, they will learn how to build a true "emergency lighting system" using John Bedini's incredible Crystal Battery technology. This lighting system can sit on a shelf for years, but after being activated with a few teaspoons of water, it can run the emergency light for WEEKS at a time! A workshop teaching participants how to build this system is included for all attendees. What an astonishing day!


On the second day of the conference, an overview of sustainable energy technologies will be presented, along with the first public telling of the Real History of the Ed Gray self-running engine.

This will be followed by two presentations on the most advanced electromagnetic methods ever developed. These processes prove that electrical energy can be conserved while real work is delivered, when magnetic fields are harnessed correctly. The Second Law of Thermodynamics crashes and burns right here!


To finish off the day, Peter Lindemann, another long time legend in the alternative science field, will show how advanced discoveries in Classical Mechanics make it possible to harness Gravitational Accelerations and Centrifugal Forces that can lead to the creation of a true "Mechanical Engine", unlocking the method and mystery of the "Self-turning Wheel".


This conference will provide the attendees with the end result of over 100 years of research and experimentation by some of the best engineers in the field. If you have ever wondered whether advanced energy inventions really exist, then this is the Conference you have always wanted to attend! The fabled "free lunch" is also provided on both days.


For additional information about this groundbreaking conference, visit John Bedini & Peter Lindemann Conference 2012! (http://energeticforum.com/conference)


###

Peter Lindemann
02-09-2012, 12:01 AM
Hi Everybody,

OK, you wanted to know more about the technologies that work. Well, this Conference is our answer. You are going to hear from the REAL leaders in the field and see the hardware they have built. You want super high fuel efficiency, we've got that. You want emergency lights that run for weeks on a tablespoon of water, we've got that. You want high COP electric motors, including the theory, the math, and the working models, we've got that. You want to be able to rejuvenate your body and stay younger much longer than you thought possible, we've got that. Plus lots more!

Come meet the people who are building a better future. See you there!

Bedini - Lindemann Science and Technology Conference
(http://www.energeticforum.com/conference/)

Peter

alvarohn
02-09-2012, 03:40 PM
Hi Alvaro,

We have discussed live streaming but have no plans to do this at this time.

We do however have finalized and confirmed all the speakers and will be launching the website with all details this week!

=( ok Aaron thank you

=) I will be sending you guys the best energy from here =)

best,

Alvaro

Aaron
02-13-2012, 03:23 AM
@All,

The conference is only for 150 people. A few people wondered if they would lose their payment if they sent it after the spots are filled. The answer is NO. If all 150 spots are filled and you send payment after that, your payment will be returned.

Aaron
02-15-2012, 09:21 AM
Bedini-Lindemann 2012 Conference on Peswiki page: Events:2012:June-July:Bedini-Lindemann 2012 Science & Technology Conference - PESWiki (http://peswiki.com/index.php/Events:2012:June-July:Bedini-Lindemann_2012_Science_%26_Technology_Conference)

Aaron
02-16-2012, 12:33 AM
Jeane Manning's announcement: limited seats at Bedini-Lindemann event June 30 & July 1 | Changing Power (http://changingpower.net/articles/limited-seats-at-bedini-lindemann-event-june-30-july-1/)

Front page story at Peswiki: Main Page - PESWiki (http://peswiki.com/index.php/Main_Page)

and... News - PESWiki (http://peswiki.com/index.php/News)

Featured in Peter Lindemann's latest newsletter: Free Energy | February 2012 Update (http://www.free-energy.ws/Update_02-2012.html)

Google search: https://www.google.com/search?q=bedini+lindemann+2012

Aaron
02-17-2012, 09:52 AM
Thanks to the following sites for announcing the conference!

MullerPower.com ... Advancing the Legacy of Canadian free energy inventor Bill Muller and his remarkable Motor / Generator Designs (http://mullerpower.com/index.php)

ZPEnergy.com (http://www.zpenergy.com/modules.php?op=modload&name=My_Calendar&file=index&type=view&eid=98)

Aaron
02-21-2012, 02:40 AM
For anyone outside of the USA, we can take International Bank Transfer.

Simply fill out the registration form and make a note on it that you want to pay by International Bank Transfer. Scan it in and send it to the email on form.

When we receive it, we will send you bank transfer instructions.

Details are here on the bank transfer: http://www.energeticforum.com/conference/#registration

Aaron
02-21-2012, 03:47 AM
Ed Gray Motor to Appear at Conference!

John Bedini's friend Reggie has one of the old Ed Gray/Cole Motors and will have it at the conference!

FRC
02-21-2012, 07:00 AM
Ed Gray Motor to Appear at Conference!

John Bedini's friend Reggie has one of the old Ed Gray/Cole Motors and will have it at the conference!

Is this the same "Ron Cole" as in the Bedini/Cole window motor?


George

Aaron
02-21-2012, 07:29 AM
Hi George,

No, it is a reference to Marvin Cole. Marvin Cole is the original developer of what Ed Gray took and claimed as his own.

Aaron
02-23-2012, 09:55 PM
The conference is limited to 150 people.

Today after just 2 weeks, we are already 1/3 sold out
so there are ONLY 100 SEATS LEFT!

It is important to register early so you can make travel
and hotel arrangements. The conference is the same
weekend as the world's largest 3-on-3 basketball tournament
in Spokane and they will start promoting it soon and many
flights will be booked quick so please hurry.

http://www.energeticforum.com/conference/

Aaron
02-24-2012, 06:33 AM
Thank you to the following sites for promoting the conference! :notworthy:

Bedini-Lindemann 2012 Science & Technology Conference : Wherevent.com (http://www.wherevent.com/detail/aaron-murakami-bedini-lindemann-2012-science-technology-conference)

John Bedini - Peter Lindemann 2012 Science and Technology Conference, June 30 and July 1, 2012 (http://www.ecatplanet.net/showthread.php?471-John-Bedini-Peter-Lindemann-2012-Science-and-Technology-Conference-June-30-and-July-1-2012)

Thread *JUST RELEASED* 2012 Energy Science & Technology Conference! | theoretical physics | BoardReader (http://boardreader.com/thread/JUST_RELEASED_2012_Energy_Science_Techn_13zovtXxo8 .html)

John Bedini – Peter Lindemann 2012 Science and Technology Conference, June 30 and July 1, 2012 | Fuel Saver News: Save on Gas (http://oil.fuelspace.com/2012/02/17/john-bedini-peter-lindemann-2012-science-and-technology-conference-june-30-and-july-1-2012/)

http://www.maxgreenenergy.com/83/

John Bedini – Peter Lindemann 2012 Science and... - automotive - FriendFeed (http://friendfeed.com/gasoline/edb033a6/john-bedini-peter-lindemann-2012-science-and)

sterlingda's blog | Guerilla Media (http://www.guerillamedia.co.nz/blog/8072)

alternative energy products: Alternative Energy (http://www.renewenergyproducts.com/2012/02/alternative-energy_18.html)

http://www.energyholiday.com/2012/02/17/john-bedini-peter-lindemann-2012-science-and-technology-conference-june-30-and-july-1-2012/

Aaron
03-02-2012, 10:27 PM
The conference is limited to 150 people.

Today after just 3 weeks, we are already 40% sold out
so there are ONLY 89 SEATS LEFT!

It is important to register early so you can make travel
and hotel arrangements. The conference is the same
weekend as the world's largest 3-on-3 basketball tournament
in Spokane and they will start promoting it soon and many
flights will be booked quick so please hurry.

http://www.energeticforum.com/conference/

Aaron
03-03-2012, 10:23 PM
ONLY 89 SEATS LEFT!
Register now: http://www.energeticforum.com/conference/

Thanks to my good friend Shannon Burnett-Gronich for helping me share the conference at your forum!
Bedini-Lindemann 2012 Science & Technology Conference - Conscious Living Space (http://consciouslivingpartnership.ning.com/events/bedini-lindemann-2012-science-technology-conference)

Thanks to the United Free Energy Portal for announcing the conference!
United Free Energy Portal: John Bedini - Peter Lindemann 2012 Science & Technology Conference, June 30 & July 1, 2012 (http://freeenergyportal.blogspot.com/2012/02/john-bedini-peter-lindemann-2012.html)

Thanks to this site for listing our event:
atlantis rising the atlantis 2011 conference.html | Search Results | Entertainment Hot Trends (http://intertainmenthottrends.com/search/atlantis-rising-the-atlantis-2011-conference.html)

Thanks for posting our event in your news feeds!
SFTeslaSociety at Yahoo! Groups (http://www.directrss.co.il/TextPage_EN.aspx?ID=8261634)

Aaron
03-06-2012, 08:43 PM
Facebook conference event page:
Aaron Murakami | Facebook (http://www.facebook.com/aaronmurakami13#!/events/165366590244083/)

Aaron
03-10-2012, 12:54 AM
There is a picture posted of the "Ed Gray" Purple motor on this site:
http://www.energeticforum.com/conference/
We are told it will be brought to the conference for display.

EDIT: WE DO NOT KNOW IF IT WILL BE THERE. THE OWNER(S) MAY NOT BE ABLE TO MAKE IT.

Aaron
03-24-2012, 05:56 AM
There are ONLY 76 seats left!

Make sure to register quick. We're barely a month into
the announcement and it's half sold out. Usually, this kind
of response doesn't happen until a few weeks before
the conference date - so we are WAY ahead of schedule!

Go here now: http://www.energeticforum.com/conference/index.php

Aaron
04-05-2012, 02:14 AM
Special thanks to Jeane Manning for posting one of the conference banners with her article here: Limited seats at Bedini-Lindemann event June 30 & July 1 | Changing Power (http://changingpower.net/articles/limited-seats-at-bedini-lindemann-event-june-30-july-1/)

Aaron
04-07-2012, 07:31 AM
http://www.energeticforum.com/conference/index_files/johnbedini-peterlindemann.jpg (http://energeticforum.com/conference)
Limited to Only 150 People - ABSOLUTELY NO EXCEPTIONS!
HURRY - ONLY 67 SEATS LEFT!

http://www.energeticforum.com/conference/index.php

Aaron
04-11-2012, 09:09 PM
Revealed: Advanced Technologies Released to Public

Bedini-Lindemann 2012 Science & Technology Conference - JUNE 30 & JULY 1



Spokane, Washington


The Inland Northwest continues to prove itself to be fertile ground for the development of advanced technologies, especially relating to renewable energy. Four leaders in the grassroots, sustainable energy field, from the Spokane, Washington and Coeur d'Alene, Idaho areas, join forces by creating a one-of-a-kind conference, highlighting new and potentially disruptive technologies.



This conference will be held at the Eagle's Lodge in Hayden, Idaho, on June 30th and July 1st, 2012. A portion of the proceeds will be donated to this non-profit organization, which is dedicated to community service and charitable causes in the Inland Northwest.



On the first day of this two-day event, participants will learn how to take a new invention from the idea stage, through prototyping, development, and into mass manufacturing. They will also be shown a spectacular technology that is raising the fuel efficiency of gas generators by as much as 300%, and the mileage of cars and trucks by as much as 70%.


After lunch, they will be introduced to a new discovery in biochemistry that is being called the "greatest breakthrough in health science in our lifetime". And finally, they will learn how to build a true "emergency lighting system" using John Bedini's incredible Crystal Battery technology. This lighting system can sit on a shelf for years, but after being activated with a few teaspoons of water, it can run the emergency light for WEEKS at a time! A workshop teaching participants how to build this system is included for all attendees. What an astonishing day!


On the second day of the conference, an overview of sustainable energy technologies will be presented, along with the first public telling of the Real History of the Ed Gray self-running engine. This will be followed by two presentations on the most advanced electromagnetic methods ever developed. These processes prove that electrical energy can be conserved while real work is delivered, when magnetic fields are harnessed correctly. The Second Law of Thermodynamics crashes and burns right here!


To finish off the day, Peter Lindemann, another long time legend in the alternative science field, will show how advanced discoveries in Classical Mechanics make it possible to harness Gravitational Accelerations and Centrifugal Forces that can lead to the creation of a true "Mechanical Engine", unlocking the method and mystery of the "Self-turning Wheel".



This conference will provide the attendees with the end result of over 100 years of research and experimentation by some of the best engineers in the field. If you have ever wondered whether advanced energy inventions really exist, then this is the Conference you have always wanted to attend! The fabled "free lunch" is also provided on both days.



For additional information about this groundbreaking conference, visit John Bedini & Peter Lindemann Conference 2012! (http://energeticforum.com/conference)

(http://energeticforum.com/conference)
Conference Sponsors include: Energenx, Inc., Tesla Chargers, A&P Electronic Media, Energetic Forum, Flyback Energy, Inc., Gadgetman Technologies, and many others.
###

Aaron
04-26-2012, 09:33 PM
http://www.energeticforum.com/conference/index_files/johnbedini-peterlindemann.jpg (http://energeticforum.com/conference)
Limited to Only 150 People - ABSOLUTELY NO EXCEPTIONS!

HURRY - ONLY 55 SEATS LEFT!

http://www.energeticforum.com/conference/index.php

Aaron
05-02-2012, 09:50 PM
We have only 8 weeks to go and are ALREADY 2/3 SOLD OUT! Seating is limited so if you have any desire to go, now is the time to get registered.


Hoopfest is the same weekend in Spokane - the world's largest 3 on 3 basketball tournament so many flights are going to be filled up.



You can see more information about what is being presented here: http://www.energeticforum.com/conference/

Aaron
06-10-2012, 06:52 PM
http://www.energeticforum.com/conference/index_files/johnbedini-peterlindemann.jpg (http://energeticforum.com/conference)
Limited to Only 150 People - ABSOLUTELY NO EXCEPTIONS!

HURRY - ONLY 45 SEATS LEFT!

http://www.energeticforum.com/conference/index.php

If you paid and haven't received a confirmation email yet, private message me asap! If you are confirmed, make sure you get your hotel and travel arrangements in orders immediately. Come into the Spokane International Airport, airport code: GEG

Aaron
06-20-2012, 08:19 PM
http://www.energeticforum.com/conference/index_files/johnbedini-peterlindemann.jpg (http://energeticforum.com/conference)
Limited to Only 150 People - ABSOLUTELY NO EXCEPTIONS!
HURRY - ONLY 37 SEATS LEFT & 10 Days to Go!
If you paid and haven't received a confirmation email yet, private message me asap! If you are confirmed, make sure you get your hotel and travel arrangements in orders immediately. Come into the Spokane International Airport, airport code: GEG

---------

SPECIAL OFFER - Ron Hatton of Gadgetman Groove Technologies has been kind enough to give a special for $50 off for Energetic Forum Members and Attendees of the Conference - please look in the right column here for the PDF with the details! http://www.energeticforum.com/conference/index.php#gadgetspecial

mbrownn
06-21-2012, 10:45 AM
Wish I could be there:(

Will this conference be taped for us that cant make it?

Aaron
06-25-2012, 12:55 AM
Greetings everyone,

We apologize but we can no longer accept bank transfers or wires for payment. There is not enough time for the wires to be completed in time for the conference.

We can now only accept money orders or cashier's checks by overnight or 2nd day air.

If you have sent payment but have not received a payment confirmation, please private message me immediately.

Thank you!

Aaron
06-25-2012, 12:59 AM
Wish I could be there:(

Will this conference be taped for us that cant make it?

I'll ask the others.

mbrownn
06-25-2012, 10:12 AM
Thanks it would be appreciated

Aaron
06-25-2012, 10:13 PM
mbrown,

I might be able to find out tomorrow.

------------

@All, besides sending us a check or money order overnight, you CAN pay at the door with cash. But before just coming, make sure to confirm with me so I can have your name on the list. We really can only have so many people. Fill out and scan me the registration form and let us know you'll pay cash at the door.

Aaron
07-02-2012, 06:54 PM
The conference was a MASSIVE SUCCESS! :blowout:

There was quite a bit of info shared that had never been revealed publicly before about electric motors. No complex theories needed and all can be proven using conventional info that is in the textbooks.


Conventional electrical simulators can show extremely high COP electric motors because all the conventional formulas actually allows for it. Anyone that says different theories are needed are wrong.
100-200 watts per horsepower electric motor since all the Lenz law has been removed (different presenter) than the above bullet point. I saw that motor a couple years ago. All done using CONVENTIONAL textbook info to prove it :thumbsup: I know this presenter - one of the most brilliant and IMPORTANT electrical engineers alive today...and you would have never heard of him. Simple algebra is all you need. It is so simple, even I can do this math. ;)
How to get serious mileage gains in a car. This was Ron Hatton with the Gadgetman Groove. I presented him with my data for the last 60 times that I went to the gas station with plenty of notes... for 2 months, the groove did nothing. Ron was kind enough to have Karl from Tacoma that does the mod come to Spokane to look at my car. Idle air intake was a problem and was too much of a vacuum loss so he restricted that a little. Computer showed fuel trim numbers dropped through the floor. He also adjusted the groove in the throttle body a bit. I reset the computer over night and have been to the gas station twice since then. The average for the last 58 times I went to the gas station was 20.xx (will have to ask Ron the exact decimal) and it is already at 26.xx, which is a 22% increase in MPG on a Subaru Legacy GT 2.5 liter boxer engine with 5 speed. It was the single most biggest difference mileage from anything I have ever tried on that car. Being full time AWD, it is difficult to get good mileage anyway and 22% immediately is very big. I will get even more as the computer relearns over the next few fill ups... IT WORKS!
Many other incredible presentations including John Bedini's crystal batteries that were so big you can put a tripod under it and bbq a feast! 2 of them actually!Over 100 people are already wanting us to do another conference, they loved the smaller venue - it was more intimate and networking was much more easy. I want to give everyone who came priority registration before opening it up to others that didn't come.

Some of the presentations will be available in downloadable digital format so go here to get on the list to be notified: Energy Times (http://www.emediapress.com/energytimes.php?offer=qiman)

If you're subscribed to Energy Times by A & P Electronic Media then of course you don't have to sign up for that.

If you want information on any future history making conferences like what just happened, go join the list on the conference page here: Conference (http://www.energeticforum.com/conference/index.php)

hartiberlin
07-08-2012, 06:55 AM
Did nobody take some videos with their mobile phones and posted it yet to Youtube ?

I see no videos yet on youtube about it...too bad...
or was it forbidden to make videos at the conference ??

Regards, Stefan.

Aaron
07-08-2012, 08:16 AM
Attendees could take photos but no videos.

We will release some videos as they are edited.

I took a lot of photos but haven't had time to do anything with them yet.

hartiberlin
07-08-2012, 08:48 AM
Attendees could take photos but no videos.



Pretty lame !
Why did you forbid to take videos ???

What a shame....

Aaron
07-08-2012, 09:18 AM
Conferences almost always forbid video recording. That is just a fact of life.

It costs thousands to have someone professionally film the events and then edit them and letting people film it so they can post it for free on youtube defeats the purpose of having it professionally filmed to begin with.

Attendees are paying to watch the presentations, they can take notes and pictures and ask questions. But that doesn't include rights to take video, since the presentations are copyrighted by either the speaker and/or producers of the show.

There was information at this conference that was presented that has
never been presented to the public before. Basically, the cat was let out of the bag for anyone that was paying attention and I can assure you, many people were there paying attention including some physicists, professors, engineers of all sorts who were unable to argue with what was presented. This was one of the most valuable conferences ever held if not the most
valuable since much of the information was very simple to understand and
was presented in a very straightforward fashion. Many lives were changed
this weekend. I feel really good about that.

And you forget, allowing people to video the conference and post it publicly means that people who did not see enough value to come to the conference personally would get to see it free while everyone else had to pay to come, take the long journey, pay for hotels, etc... It would be completely disrespectful to every single attendee to allow that. I could
never be a part of something like that. I admire and respect people that
had enough faith in us to see that it would be worth it. They have my back
and I have theirs. This is a team effort to put something like this on.
The attendees are just as important as the producers or the speakers.
At least that is just how I look at it.

Put yourself in someone's shoes that spent a couple thousand to fly in
from across the world, get a hotel, pay for dining and transportation with
a rental car to have someone turn around and post videos for free when
they invested all their own time, money and effort? If you think that is lame
to respect that, then I don't know what to say.

Anyone that was unable to make it can pay a fair price for each video available from each presentation and they don't have to spend money on hotels, airfare, dining, etc... They miss the experience that can never be substituted but at least they can see what was shared.

There will be another conference and many attendees already want to register for it. It may be a year away but it just depends - it could be sooner and there will be more incredible presentations.

I do want to make something perfectly clear. This conference was not the third of a series of the other conferences. This conference was unique with a diversity of topics and has nothing to do with the producer of the other two conferences. I was the primary organizer and promoter for this conference and I'm not affiliated with the promoter of the other conferences.

And, so it is very clear, proceeds from this event are donated to the lodge, which is a non-profit charitable organization that does a lot of community work helping the less fortunate. That is one of the reasons I'm so passionate about this - it is about service to others - before, during and after the conference.

mbrownn
07-08-2012, 11:40 AM
It would be great if you could post some hi res pictures of the motor and the event for those of us that cannot make it.:D

hartiberlin
07-08-2012, 04:59 PM
So it is all only about selling and not sharing?

Come on, a few video clips would be something else than being live there and speak with all the attendees over there ………

Okay might have not been cheap to organize the event but there are people out there that just don't have the money and time to attend there personally ………

Regards, Stefan.

Aaron
07-08-2012, 06:36 PM
Stefan, I can probably post some video "trailers" but all the raw footage is being processed. I won't have anything for a while. It isn't all about making money, I said everyone that paid money to come isn't going to be abused by having it all posted for free.

mbrown, the motor was part of a video presentation. The speaker explained simply what he did. It has zero back emf, it has a lot of torque, the speed can be increased without increasing voltage - instead the circuit increases the switching speed. It is both attraction and repulsion that is pulling the rotor around. His switching mechanism is proprietary but anyone should be able to apply the principles. The switch is brilliant and switches in nanoseconds. I've seen this motor myself - it exists. You'll see what it looks like in the video.

More importantly, he shares some very basic principles that anyone can apply. There are a couple experiments anyone can do that indisputably proves that magnetism is energy or imparts energy. Many of us here already believe this but there is one experiment that will beat any skeptical physicist, engineer, etc... 100% of the time. He was thrown out of a few universities for demonstrating this but it absolutely cannot be argued.

He really is a master of magnetics. His company developed many things. Including a transformer that can lower energy costs for industrial lighting lighting kilowatts of tubes while the core stays cold - removing virtually all magnetic losses (no hysteresis). All his products are the top in the world for their own category.

His work will make it easier for people to understand what to do instead of having to learn complex theories that hardly anyone understands. And, it is all with very elementary principles that non-engineers can get. You really know who gets it when they can explain it in simple terms that anyone can understand.

Also, there are windows of opportunity even in conventional simulator programs that will demonstrate very high COP electromagnetic reaction motors. It isn't a glitch, all the conventional math, etc... actually allows for it. That is what is so surprising. Anyone that says different is spreading disinformation. There is more than one way to skin a cat. Some are complex and some are simple. I prefer the simple.

More coming soon...

Aaron
07-08-2012, 07:14 PM
Hello everyone,

If you purchased one of Ron's Gadgetman Groove licenses, please read this:

"I now have corrected the issue with the DVD's and am ready to send them out. As not all purchasers left a copy of their agreements with me, please announcement on the boards (or to the entire group) for those who have purchased their Personal Licenses to contact me via e-mail with their correct shipping addresses and I will send out their DVD's in the next day's mail."

So if that applies to you, please email Ron ASAP so he can send out your package.

hartiberlin
07-08-2012, 09:06 PM
Stefan, I can probably post some video "trailers" but all the raw footage is being processed. I won't have anything for a while. It isn't all about making money, I said everyone that paid money to come isn't going to be abused by having it all posted for free.

More coming soon...

Well yes, I understand, but people also go to soccer matches or Baseball
events, although they could also see it for free on TV....

To be there live is what costs the money and makes the thrill...

so posting a few video trailers would only help your cause that next year there will be more participants and will not
hurt your visitors...

Looking forward to see a more detailed summary...and at least see a few pictures.

Many thanks.

Regards, Stefan.

Aaron
07-08-2012, 10:21 PM
Well yes, I understand, but people also go to soccer matches or Baseball
events, although they could also see it for free on TV....Regards, Stefan.

Ok, but they're making a fortune selling advertising on TV. They're not posting it for free.

Stefan, we're doing all we can right now. We might be able to release a new video every 3 weeks or so.

teej_seeker
07-09-2012, 01:57 AM
Glad to hear that the conference went well. I was unable to make it due to a host of unavoidable reasons.

I am hoping that the next conference is in the pipeline and i plan to make it there. hopefully it will be in the the same place and around the same time.

cheers,

tejinder
malaysia

GadgetmanPrime
07-09-2012, 02:09 AM
I have to say the conference was truly amazing. While I had no time (boo-hoo!) to listen to anyone after Mike Hirata, I could see the looks on the faces of all the attendees and they were LIT UP!!!

Aaron, you did an amazing job. It was a pleasure to visit with you all, and I look forward to the next event!

Where is it?

Kalispell Hot Springs?

mbrownn
07-09-2012, 11:09 AM
Stefan, I can probably post some video "trailers" but all the raw footage is being processed. I won't have anything for a while. It isn't all about making money, I said everyone that paid money to come isn't going to be abused by having it all posted for free.


Anything you post, I will be happy with.


mbrown, the motor was part of a video presentation. The speaker explained simply what he did. It has zero back emf, it has a lot of torque, the speed can be increased without increasing voltage - instead the circuit increases the switching speed. It is both attraction and repulsion that is pulling the rotor around. His switching mechanism is proprietary but anyone should be able to apply the principles. The switch is brilliant and switches in nanoseconds. I've seen this motor myself - it exists. You'll see what it looks like in the video.


On the motor, I hadn't thought about attraction/repulsion but it does make perfect sense with what I think the motor is. Bipolar switching?

More importantly, he shares some very basic principles that anyone can apply. There are a couple experiments anyone can do that indisputably proves that magnetism is energy or imparts energy. Many of us here already believe this but there is one experiment that will beat any skeptical physicist, engineer, etc... 100% of the time. He was thrown out of a few universities for demonstrating this but it absolutely cannot be argued.

I have come to this conclusion myself

He really is a master of magnetics. His company developed many things. Including a transformer that can lower energy costs for industrial lighting lighting kilowatts of tubes while the core stays cold - removing virtually all magnetic losses (no hysteresis). All his products are the top in the world for their own category.

His work will make it easier for people to understand what to do instead of having to learn complex theories that hardly anyone understands. And, it is all with very elementary principles that non-engineers can get. You really know who gets it when they can explain it in simple terms that anyone can understand.

I believe he is right based upon what you say here and what I have learned myself.

Also, there are windows of opportunity even in conventional simulator programs that will demonstrate very high COP electromagnetic reaction motors. It isn't a glitch, all the conventional math, etc... actually allows for it. That is what is so surprising. Anyone that says different is spreading disinformation. There is more than one way to skin a cat. Some are complex and some are simple. I prefer the simple.

I have been saying this quietly for a while, even though I have not driven a motor into overunity yet, I can account for all the losses through the use of simulators and I can achieve staggering COPs in simulations. The motors I have used have had either too much resistance, too little inductance or too many iron losses to make them run this way in practice and the simulations showed why.

More coming soon...

:thanks: I can't wait

Les_K
07-09-2012, 03:52 PM
Aaron,

I agree mostly with what your saying. There is nothing unreasonable.
However I would like to add that Those who attended the conference where John revealed the Ferris Wheel posted wonderful information and pictures of the machine. In fact the thread on the Ferris Wheel grabbed me and got me to build something far beyond What I would have ever thought of. That posted information Drove me to be at the next conference.
The more stuff those in attendance can post the more exciting the conferences become. And the more driven people are to attend. There is no way to get as much even from a professional video as attending the conference. I love the video's but they are no compensation for the experience.

The other thing that I feel is very important is replication. That is everything.
If the attendees can come home from the conference and replicate the work and on youtube, and show motors that use 100 to 200 watts and produce 1HP then nobody is going to miss the next conference, and all the videos are sold before they are made! Real replication is the most viable validation of all the effort you have all put forward in helping this technology move along.

Real validation is making the machine not just run, it is making the machine run within those parameters. That is where the real action is. The real joy and the real value of going to a conference like this. its so that you can come home and actually do it! Oh, I really wish I could have been to this one Aaron, I can see that replications are going to start coming out and I missed it!!! Dang!:eek:

Les

Aaron
07-10-2012, 06:18 AM
I love the video's but they are no compensation for the experience.

and all the videos are sold before they are made!

Real replication is the most viable validation of all the effort you have all put forward in helping this technology move along.

Real validation is making the machine not just run, it is making the machine run within those parameters. That is where the real action is. The real joy and the real value of going to a conference like this. its so that you can come home and actually do it! Oh, I really wish I could have been to this one Aaron, I can see that replications are going to start coming out and I missed it!!! Dang!:eek:

Les

I agree, no substitution for being there.

John Bedini also let people take pictures of dozens of papers he never showed before on other things.

The low watt for hp motor is proprietary. He showed some old company film on this but he did describe what the principles were. There are many engineers there that get what he was saying so they may start experimenting with them.

The video will show one experiment that is one of the simplest I ever saw to absolutely 100% undeniably prove that the amount of magnetic flux at a coil is not directly related to the amount of watts expended. There were multiple physicists that went up to this speaker to tell him that they will never look at physics again. I'm sure there will be plenty of people doing this experiment. It is dangerous because of the arcing, etc..., so safety first and only qualified engineers should try it of course.

No payments will be accepted for any videos before they are made - unlike how some people do business. We can only do business above board.

Les_K
07-11-2012, 12:51 AM
I agree, no substitution for being there.

No payments will be accepted for any videos before they are made - unlike how some people do business. We can only do business above board.

Not at all what I was meaning Aaron, I was simply saying people would be in line to purchase. My apologies for that one.

Les

Aaron
07-11-2012, 06:44 AM
Not at all what I was meaning Aaron, I was simply saying people would be in line to purchase. My apologies for that one.

Les

No problem - my misunderstanding. I didn't take offense just wanted to clarify.

The fist video is scheduled for release on July 24th!

If anyone is not on the Energy Times list, go here and you'll be the first to know: Energy Times (http://www.emediapress.com/energytimes.php?offer=qiman)

The first video will be on Magnetism.

John_K
07-13-2012, 07:58 AM
I very much enjoyed the conference. The speakers were great, the venue was just the right size, it was well organized and how about those Idaho potatoes :thumbsup:

Aaron and Chuck did a great job of organizing and all the people I spoke to had a great time.

John Bedini split his lecture into two parts, he wanted to spend a little time on answering some of the questions that come up on the forums on the Monopole. Ralph brought his 6 coiler super-pole Monopole to John's shop for a "tune up" and John asked if he would mind showing it off at the conference. Ralph did a great job building this from pictures on the Internet and the Bearden-Bedini FEG book.

We ran some tests in the shop the day before the conference which showed 9 times the output than input! We did this 3 times to be sure it wasn't just a fluffy charge. There is no secret to doing this, you just have to build it like John says how to build - that's it! John pulled me out of the audience to explain how to tune the Monopole, I only reinforced everything that John has been saying for years.

The second part of John's lecture was on the crystal batteries, this was a great presentation followed up by everyone making their own to take home with them. Kudos to Chuck for getting all of the kits together. The two big crystal batteries John and Chuck made were awesome, powering a large bank of LEDs.

I also met lots of great people who are all passionate about the same thing. It was great to have a relaxing environment where you could network with people from all backgrounds and different parts of the world.

I can hardly wait for the next conference :thanks:

:cheers:
John K.

Web000x
07-13-2012, 03:02 PM
We ran some tests in the shop the day before the conference which showed 9 times the output than input! We did this 3 times to be sure it wasn't just a fluffy charge. There is no secret to doing this, you just have to build it like John says how to build - that's it! John pulled me out of the audience to explain how to tune the Monopole, I only reinforced everything that John has been saying for years.


John,

Please don't take this the wrong way, but I am still confused as to your stance on the monopole. In the above quote, it would seem that you tested a monopole that is capable of swapping batteries around while maintaining enough ampere-hour capacity to keep the machine running indefinitely. Is this correct?

At the 2011 conference when asked about your personal setup at home, you replied to the gentleman telling him that your 10 coiler was run off of solar power which in turn charged your batteries. If you are only reinforcing what John has said for years, why is it that you ten coiler cannot be run like the monopole in the above quote? Are you using the solar panels because you already had them and it would only make sense to utilize them?

Again, don't think that I am attacking you. I have just heard a thousand different takes on the monopole, and in my personal experiments, I have only seen an efficient battery charger. What will your ten coiler do if it is run off of batteries alone?

Dave

John_K
07-14-2012, 01:26 AM
John,

Please don't take this the wrong way, but I am still confused as to your stance on the monopole. In the above quote, it would seem that you tested a monopole that is capable of swapping batteries around while maintaining enough ampere-hour capacity to keep the machine running indefinitely. Is this correct?

At the 2011 conference when asked about your personal setup at home, you replied to the gentleman telling him that your 10 coiler was run off of solar power which in turn charged your batteries. If you are only reinforcing what John has said for years, why is it that you ten coiler cannot be run like the monopole in the above quote? Are you using the solar panels because you already had them and it would only make sense to utilize them?

Again, don't think that I am attacking you. I have just heard a thousand different takes on the monopole, and in my personal experiments, I have only seen an efficient battery charger. What will your ten coiler do if it is run off of batteries alone?

Dave

Hi Dave,

I will make this short because I don't want to hijack this thread which is about the conference. There were many more excellent speakers at the conference, not just JB.

I must make very clear if you want to have success with Bedini's Monopole is that you CANNOT swap the primary and charge batteries around without modifying the circuit.

This is why I use solar panels with one of Bedini's solar chargers to keep the primary charged.

If you want to discuss this further please open up another thread and we can discuss there.

:cheers:
John K.

mbrownn
07-14-2012, 01:27 AM
John,

Please don't take this the wrong way, but I am still confused as to your stance on the monopole. In the above quote, it would seem that you tested a monopole that is capable of swapping batteries around while maintaining enough ampere-hour capacity to keep the machine running indefinitely. Is this correct?

At the 2011 conference when asked about your personal setup at home, you replied to the gentleman telling him that your 10 coiler was run off of solar power which in turn charged your batteries. If you are only reinforcing what John has said for years, why is it that you ten coiler cannot be run like the monopole in the above quote? Are you using the solar panels because you already had them and it would only make sense to utilize them?

Again, don't think that I am attacking you. I have just heard a thousand different takes on the monopole, and in my personal experiments, I have only seen an efficient battery charger. What will your ten coiler do if it is run off of batteries alone?

Dave

On monopoles not built exactly as John said, I got 97% charge efficiency plus around 20% mechanical power. All you need to do is harvest that mechanical power and add it into the system. Unfortunately I never quite got there. The best way was to feed the output of the pickup coils to a capacitor across the input, the supply being isolated from this capacitor by a diode but the capacitor causes a 50% loss from these coils. The diode also stops the bouncing effect of the Bedini circuit on the source battery reducing the efficiency and adds an impedance:(

On a trifilar wound fan, I did, the charging was higher than the input but this was only when using battery swapping. I don't know why it does not work when you loop it back to the source but it doesn't, I assume it is to do with how the battery is charged and discharged. The problem here was after a number of cycles, the battery crystallized and became useless.:(

Remember the gain in the bedini circuits is to do with the batteries and how they are used. If a third battery was charged from the pickup coils, after about 5 to ten battery swaps this battery should be charged and contain enough power to make up the losses in the two other batteries but we would be doing a lot of swapping work for a small gain:(

So why hasn't the monopole been the solution to the energy problem?

It is not built exactly as John said and the gains are small.

Aaron
07-18-2012, 03:44 AM
"Hello John B, Peter, Aaron,Chuck and John II...ha...ha... Just sending my sincere thanks for the conference. The conference was really inspiring to me. I was especially pleased to get a chance to talk to John B. I wasn't really expecting that. I came away kicking myself for not trying harder to get to talk to him more. I have a few questions that would help clarify some things. For example what is the specific geometry of the window motor such that impedance is not too high or even what relationship does the number of turns or length of wire have to the power of the mags. Anyway, it was really great hearing Paul Babcock and Also David. It occurs to me that rather than even having to "use" power to saturate the core one might use an amped up Leedskalnin PMM to maintain the saturation for free etc. Don't know it that's possible. Anyway I was really inspired and would love to be on the mailing list for anything like it in the future." - Bob G. (Shale)

"I really liked the conference and plan to attend next year. What impressed me most was the accessibility of the speakers. All of you spent so much answering questions. That really set the tone of the meeting." - Mark

"The conference was not only outstanding but inspirational. These kind of events are a must if our world is to move forward with new discoveries. It is my sincere hope that the conference becomes an annual event." - Marty Frantz

"Yes I made it from Northern Canada again, this was a wonderful conference as were the others. This was a special one,and having it at the Eagles with its relaxed setting made for a great weekend, the one on one time available to all was wonderful. The extra time and being able to share a few pints right on site allowed us to make friends, not just casual participants in a ordinary conference. Having Ron doing groove mods outside the door was perfect, His poetry at our table the last evening was stunning , a" very talented" man I must say. A special thanks to John Bedini for his extra 41 pages of drawings and explanations of how to build magnetic motors in his second edition of Free Energy Generation .I read it twice while waiting in airports on my way home, and for me it clears up much of the unknown about magnetism . Having purchased and experimented with various kits from previous conferences I was still in the dark about what was really happening. Thank you John for your foresight and generosity. I would highly recommend that anyone wanting to pursue building magnetic motors get a copy of John's book and read it till they understand it. The Crystal Battery building workshop was very good . I believe some of us would attend a few weekend specific topic workshops through out the year if it was possible. Being part of hands on building something is a very productive way of transferring knowledge. I hope 2013 will see conference number 4, if so, you can put my name down now as a certain attendee." - Ken Rombough

"Thank you for putting on this conference. I learned so much from this one event, amazing. I am especially interested in the super efficient motor technology." - Jerry


"Thank you for making such a dramatic improvement over last years conference. The information was clearer and much better presented. A much more professional and organized showing this year! I can appreciate only some of the slings, arrows and trials that have been endured, to reach this point. There is an ever growing community of people, prepared to stand up and defend what is true, right and correct. I'm sure that I speak for the majority, when I say, please remember to call on us, if help and support is ever required. Again, thank you for making this years conference so much improved." - Will

"This was my first such conference in 30 years, the last being a 1982 U.S. Psychotronics Conference in Boulder , Colorado. It was well run and well supported by your people. Even though I hated the venue, it was very supportive. Love the smokers, hate the smoke... The information presented was good. Do you think Aaron M.’s spark technology parallels Intelegentry’s Plasmic Transition Phase motor/plasma engine, the latest incarnation of the Papp motor? I wish he could have presented, or you could have had someone there from Intelegentry. I saw that motor represented on the slide show by Jeane Manning, but no time left to describe it to everyone... Most important to me, were the contacts I made at the conference. Houston is nowhere near as open an environment as the Pacific Northwest , and I have been eagerly anticipating involvement in Free Energy networking since I moved here 2 years ago." - Steve Grubbs

"Many thanks for this conference. The organization was perfect and the presentations were excellent. My language skills did not always allow me to catch every detail of the talks ; that is why I will be particularly interested in accessing to the videos, as soon as they will be available." - NB, France

"Yes, we are interested in the videos. Yes, we both enjoyed the conference, their presentations & information and are glad we attended." - Kathleen

"Flying from Germany (where I live) to Idaho was a LONG flight, but the rewards from seeing, learning, and connecting to others with similar 'interests, experiences, and goals for life' was well worth the time and cost of attending the Bedini-Lindemann Conference! Further, I was impressed with the patience, time, and knowledge shared by John B, and Peter L with ALL the participants at the 2012 Conference. I truly felt a part of the Conference and not just a number, or bystander attending. This is something I will try to attend each year! I teach in Germany at a US Dept of Defense school (for US military kids) and have taught and made Bedini projects for the past 6 years with my Technology / Beginning Electronics classes. We have used Bedini DVDs and Youtube downloads as a guide in our attempts at mastering the concepts behind his motor/generators and lighting. After attending the 2012 Conference in Idaho I will be able to take my teaching to a new level and challenge my students even more due to the networking with others, personal visits with John, Chuck, and others, and being able to purchase materials I was able to send back to Germany for my students. I will try to make this an 'annual' event as the wealth of knowledge, presenters, and experience I gained will be with me for decades to come. If I didn't get to visit with you this year, I will hope that next year I may be able to make new friends and improve my net-working with fellow "Bedinians". - Jim Davis, Tech Ed'n / (pre)Engineering teacher - DoD's teacher, Germany

Aaron
07-18-2012, 03:45 AM
"A "grassroots" movement can change the world. Enjoyed the trip, meeting new friends, and the wonderful weather!" - John, Alabama

"Taking a few moments to tell you and the conference organizers how great the Bedini - Lindeman conference was. I had signed up back in February after speaking with Peter Lindemann and later became very enthused when the speaker listing was posted. It was a long journey from Vermont to the civilized Hayden area, but it was worth every minute and dollar. I truly enjoyed the majority of speakers with the high point of the conference being the last three speakers: 1) Paul Babcock gave a tremendously useful seminar that was simple and straightforward such that anyone paying attention could grasp the principles of magnetics and why magnetism can produce energy. His show and tell of the high speed switching motor left me wanting to see and hear more - ran out of time... 2) Dave Squires' seminar on the pulsed DC motor was more technical, yet comprehensible. His step by step explanation of how to overcome the major issues in standard dc motor design was absolutely great - his solutions to old problems in a real world design, well, brilliant. He even used a standard design software to prove the elegance of his solutions in producing a motor design that yields an output of 1 hp on 200 watts of input. I guess the world has turned on its head... 3) Peter Lindemann's seminar on the history of perpetual motion
machines was an instant classic. He raised many important questions on some of the basic classical laws of thermodynamics - his injection of humor was very appreciated for an otherwise dry, though interesting subject. Very thought provoking... The other speakers also held my interest and I came away with a good appreciation of their knowledge, information and expertise - all were very good... ...in Karl Smith's presentation, while the subject matter was interesting, the constant product push and miraculous results came across as a hard sell. The product may live up to its claims, however the presentation mode requires some fine tuning, at least in this writer's mind. Last, but not least, John Bedini's continual presence and patient answering of endless questions certainly raised my respect for him, both as a person and as a teacher. Oh yes, his presentation was a hoot with the questions and answers. Thank you John... In closing, this conference, in my opinion, was truly an excellent and thought provoking experience - met many great people from all over this country and abroad with perhaps the beginnings of many new worthwhile friendships. So, sign me up for the next course. Best regards to all, including the Korean, Beijing and Hong Kong Boys; Craig G, Bud M, Gadgetman, John J, John R, Mike (San Diego), Ralph (SSG), Andrew J, Breeeee and side kick, Owen M and many others." - Yaro Stanchak

"I greatly appreciated all of it. Especially appreciated getting better gas mileage from the gadget man.Otherwise, I'm not an expert in electronics, so I only understood other lecturers in part. It was well worth the cost of the seminar though." - Dr. Loyd Jacob

"Thank you for organizing and making this energy conference happen. I thought the conference was very well organized and there was an abundance of excellent information presented, especially from Paul Babcock and David Squires. Unfortunately, I had to leave the conference a little early and couldn't take in Peter Lindemann's talk. I think Peter always has excellent information and is a good presenter of that information. So, I am looking forward to hearing his talk when it is made available. My personal goal is to develop a free energy motor or transformer. I am always inspired by these conferences to apply myself to achieve that goal. Thanks again for this excellent conference. The trip from Edmonton is well worth it." - Dan Wiebe, Edmonton, Alberta

"Amazing conference. I very much enjoyed the conference. The speakers were great, the venue was just the right size, it was well organized and how about those Idaho potatoes/ Aaron and Chuck did a great job of organizing and all the people I spoke to had a great time. John Bedini split his lecture into two parts, he wanted to spend a little time on answering some of the questions that come up on the forums on the Monopole. Ralph brought his 6 coiler super-pole Monopole to John's shop for a "tune up" and John asked if he would mind showing it off at the conference. Ralph did a great job building this from pictures on the Internet and the Bearden-Bedini FEG book. We ran some tests in the shop the day before the conference which showed 9 times the output than input! We did this 3 times to be sure it wasn't just a fluffy charge. There is no secret to doing this, you just have to build it like John says how to build - that's it! John pulled me out of the audience to explain how to tune the Monopole, I only reinforced everything that John has been saying for years. The second part of John's lecture was on the crystal batteries, this was a great presentation followed up by everyone making their own to take home with them. Kudos to Chuck for getting all of the kits together. The two big crystal batteries John and Chuck made were awesome, powering a large bank of LEDs. I also met lots of great people who are all passionate about the same thing. It was great to have a relaxing environment where you could network with people from all backgrounds and different parts of the world. I can hardly wait for the next conference." - John K.

Aaron
07-25-2012, 12:31 AM
"Physicists Have Always Said That Magnetism Isn't a Source of Energy. Well, They're Wrong! What You're About To Learn is Something That Has Been Kept Secret From The Public For Over 170 Years! These Really Are The Magnetic Energy Secrets That You've Never Seen Before!"

REVEALED: Multiple methods to tap magnetism for a power gain in electrical circuits. Learn why universities throw this researcher out when he demonstrates these things to graduate students!


http://magneticenergysecrets.com/images/paul_babcock.jpg
http://magneticenergysecrets.com/images/paul_babcock_sig.jpg
Magnetic Energy
Secrets™

http://www.magneticenergysecrets.com

by
Paul Babcock

Paul Babcock has twenty-nine years of experience in industrial electronic applications, as a technician, training specialist, service manager, project manager and applications and design engineer. Paul has worked with public entities and private organizations in fields ranging from avionics, power generation, telephony and alternative energy. He has broad experience designing and implementing custom communication and electronics systems in both the public and private sectors, and in developing large-scale communications solutions for the oil and gas industry. Paul is recognized for his expertise in alternative energy systems and power generation for companies and individuals, especially in remote locations.

GET YOUR COPY NOW: MAGNETIC ENERGY SECRETS (http://www.emediapress.com/go.php?offer=qiman&pid=28)


.

gyula
07-25-2012, 02:52 PM
Hi Aaron,

In the MAGNETIC ENERGY SECRETS link this is written:

Theoretically, the math shows that this kind of motor could possibly produce 1 mechanical horsepower output for as little as 200 watts of electrical input.

Can I get an answer that in PRACTICE how much electrical input power was needed to get 1 HP mechanical output?
Putting this otherwise: what was the measured COP for the advanced electrical motor?

Thanks,
Gyula

Aaron
07-25-2012, 06:19 PM
Gyula, that isn't a claim that there is a motor at 1HP for 1-200 watts. The simple algebra shows that is what is possible. You have to listen to his explanation of how his motor works. He can speed up his motor without increasing the voltage, etc... has zero back emf and other features - and it has built in resistances, etc... to specifically keep it in the "normal" range.

Using these exact principles, he has lighting system controllers that run cold, etc... it is some theory, yes, but he actually applied these to some of the best products in the world in their category for lighting system and motor controllers.

gyula
07-25-2012, 07:04 PM
Dear Aaron,

It was obvious for me, that in the original text I quoted in italics above, the 200 Watt input power for getting 1 HP was meant as the lowest possible limit. The upper limit is of course the known 746 Watt input for getting 1 HP.
So anything between the 200 W (as the lowest possible) and up to 746 W (i.e. 200-746 Watts) is already a COP > 1 performance.

The simple algebra shows (in my understanding) that what is possible is to have a (theoretical) motor which gives 1 HP mechanical output power for 200 Watt electrical input power as the best case and the worst case here is that it gives 1 HP for 746 Watt input.

I do not understand your answer on the 1-200 Watt range, I did not write or mean that.

I would like to know what practical performance was received from an advanced motor, built by the new ways of harnessing magnetism.

Thanks, Gyula


Gyula, that isn't a claim that there is a motor at 1HP for 1-200 watts. The simple algebra shows that is what is possible. You have to listen to his explanation of how his motor works. He can speed up his motor without increasing the voltage, etc... has zero back emf and other features - and it has built in resistances, etc... to specifically keep it in the "normal" range.

Using these exact principles, he has lighting system controllers that run cold, etc... it is some theory, yes, but he actually applied these to some of the best products in the world in their category for lighting system and motor controllers.

Aaron
07-25-2012, 08:43 PM
Hi Gyula,

Actually the upper limit isn't 746 - a motor might be so inefficient, it might take 1500 watts to make a horsepower and that would be really bad.

And 746 to make a HP is only at 100% efficiency.

Most motors take a bit more and 98-99% has already been done in many different configurations but they are also all under 1.0 cop.

With the advanced motors, if 1 HP can be made at 99% efficiency for barely over 746 watts and if 50% can be recovered that would normally be magnetic losses, then it only took about 370 watts for example. I'm not getting into it any more than that because this isn't my work. I'm also not claiming that Paul has a motor making 1hp for 100 or 200 watts either and neither is he.

The 1hp for 746 watts only applies to motors built according to conventional reasoning.

This video is about different magnetic concepts and an experiment that any competent engineer can replicate. Proving that the amount of magnetism is NOT directly related to the watt seconds used per second may seem simple but is one of the biggest pokes in the eye of conventional physics and electrical engineering because they claim it is directly related.

Even John Bedini's SG proves this and so do countless other projects in this forum. I would have to say it isn't an issue of whether or not it can be done, it is an issue of people raising mental blocks to force what they see to conform to what they already believe. I'm not saying that applies to you - I'm stating this is what we're all up against. Personally, I have zero intent to convince anyone. Information will just be presented and those that want to see it for what it is will get it and those that don't, won't.

That is the most important thing to understand from this video.

As far as his particular motor, Paul describes enough details about his works that a competent builder could experiment conceptually with the same thing with only a few coils just to learn it. The ultra fast switching speeds he is using is his company property so he can't share that method but even without that fast switching, results can still be had.

Michael Kishline
07-28-2012, 05:51 PM
Did nobody take some videos with their mobile phones and posted it yet to Youtube ?

I see no videos yet on youtube about it...too bad...
or was it forbidden to make videos at the conference ??

Regards, Stefan.

Hi Stefan,
We were not allowed to take videos of the speakers this year only pictures, but we were allowed to video between speakers and everything else at the Conference.

Sorry you were unable to make it, I wish everyone could go it was awesome, well put together and the speakers were extremely informative. It was like listening to Professors excited about teaching, only difference, these guys have done what they're teaching! :rofl:

For those unable to go you can see what and who was at the Conference in 1080p HD at this channel https://www.youtube.com/playlist?list=PL4E7C4E1A7713B3D8&feature=plcp

Thanks Aaron, Peter, John, Chuck, all your wives and everyone else behind the scenes that never get recognized, you guys do a great job and a great service! Can't wait for next year.

Mike:thumbsup:
Enjoy

Aaron
08-03-2012, 05:46 PM
In 5 more days on August 8th, the second video from the conference is being released. It is Peter Lindemann's talk. More details coming soon...

Aaron
08-07-2012, 03:05 AM
Peter Lindemann's presentation is still on track to be released day after tomorrow. It is Part 2 of the Conference Series. Details coming soon...

Aaron
08-09-2012, 03:10 AM
Peter Lindemann's presentation from the conference is now available!

Go here to learn more: Perpetual Motion Reality (http://www.energeticforum.com/renewable-energy/12086-perpetual-motion-reality-peter-lindemann.html)

harlan.research
08-09-2012, 04:46 PM
Hi,

RE: John Bedini Schematic Kills Viruses/HIV

Did anyone by chance obtain the values of the components for the 6 oscillators that were chopped off on the left side of the of the copies? I know that John was offering in one of the video clips to provide the values at the back of the room to a few attendees.

Other than saying, 10Hz to 10KHz in an intermix; did he explain the further details of each oscillator's frequency, and why????.

Someone has to have these values. Really need this circuit operating for current virus-related illness.

Send Private Message!

Harlan

John_Bedini
08-16-2012, 07:16 PM
Harlan,
During the process of copying the values were cut off. I will talk about it on the Energy Science Forum.
This machine is not easy to set and build, this deals with Tom Bearden's pump wave and four wave mixing analogy. But I will go tough it.
Four Wave Mixing (http://www.energyscienceforum.com/electronic-healing-technologies/124-four-wave-mixing.html#post588)
John

Aaron
09-08-2012, 04:57 AM
Dave Squires talk on advanced motor principles from the conference will be available in about 2 weeks as a digital download!

ekpod
09-17-2012, 01:04 PM
In the free videos of your modified generator at the convention, it was learned that your team wishes to quadruple the run time before releasing plans. The Meyer - Lawton coil can resonate fuel out of an electrolytic dry cell without integrated chips. It foams all these tiny little bubbles... the current is 2A, and about 12.1 volts at the supply.

Please enjoy the video -
http://s15.postimage.org/k8dgk358r/12v_2a_electrolysis.gif (http://imageshack.us/clip/my-videos/20/xtryelawulniriwpeatldw.mp4/)

The circuit diagram will be available when it is approved upon request.
Please contact through forum message.

Aaron
09-17-2012, 05:09 PM
Thanks EKpod, but Stan Meyer's secret is mixing nitrogen with the hho to dilute it to slow down the burn and reduce the flame temp. That is how you get the energy out of the HHO. It really isn't about special frequencies or other similar things that the internet is plagued with.

ekpod
09-18-2012, 12:38 AM
I've learned that matching the resonant frequency of the water cell at every moment is important, because vibrational excitation will change the bond angle of the water and spit the molecules easier. Post process is not my concern.

The rate of gas production seems enhanced with this auto-tuned water cell whether it is electrolytic solution or plain water. Your cause seems just in pursuit of extending generator run times, and is the reason my offer stands.

I know what you mean about the internet plagues. One in particular is the dual 555 PWM circuit by Ravi. Built it, didn't electrolyze with the dry cell at all. Salvaged it for parts and built this one .

ekpod
09-19-2012, 08:02 AM
Recycling the hydroxy torch exhaust like a turbocharger is another method shown by Stanley Meyer.
Yet another way is catalyzing the flame with stainless steel or another suitable metallic substance.

The following video shows additional results with approximately 11.5V 5.5A

Resonating Dry Cell Electrolysis (http://imageshack.us/clip/my-videos/689/4rqfwvschhlhwzilqdvwuk.mp4/)

I certainly hope this shows a desireable result. This is the only electrolysis system I have built,
and would greatly appreciate an opinion on the apparent output. Fittings are 1/4in

Has anyone any interest in this?

Perhaps I could sell the plans for this circuit, or build units and offer them for sale, but who needs
that kind of press with psycho competition around? It wouldn't be right.

Better to offer it up for discussion!

Aaron
09-19-2012, 09:52 AM
EKPOD,

Please put your Stan Meyer and other electrolysis posts in threads that are on topic. This thread is for Conference related material.

Thank you!

ekpod
09-19-2012, 02:42 PM
Thanks for your interest Aaron, where might be a good location for the diagram?

Why don't you take it first and get it posted for everyone? If that's ok I'll
pm it up.

Aaron
09-19-2012, 07:02 PM
If you use the search option and put in Stan Meyer, you will see a lot of posts. Also search for electrolysis, hho, etc...

Aaron
10-04-2012, 04:53 PM
Tomorrow (Friday, October 4th), Mark McKay's presentation on the history of Ed Gray will be released.

Aaron
10-06-2012, 01:35 AM
http://energeticforum.com/images/banners/graymotor.jpg (http://www.emediapress.com/go.php?offer=energetic4&pid=34)

Go here for the homepage: The Real History of the Ed Gray Motor (http://www.emediapress.com/go.php?offer=qiman&pid=34)

Aaron
10-20-2012, 07:00 PM
The thread for the 2013 conference is here: http://www.energeticforum.com/renewable-energy/12504-2013-bedini-lindemann-conference.html

Aaron
02-09-2013, 12:30 AM
Here is the presentation Ron Hatton did on the Gadgetman Groove at the Bedini-Lindemann 2012 Science & Technology Conference. You can watch it on Youtube: https://www.youtube.com/watch?v=8JTZKdXmiPQ